• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Just got Dyno....

  • Thread starter Thread starter mity2
  • Start date Start date Jun 2, 2005

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 2, 2005
#1
  • Jun 2, 2005
  • #1
Just got Dyno(just uploaded graph)....

And she puts out little more then i thought she was going to do.
here is what she got

HP - 240.8hp@4900RPM
TQ - 281.6ft-lb@4500RPM
ABP- 29.05 in.Hg.
VP - 0.36 in.Hg.
IAT - 82.7F



I thought that may be she is putting 230hp or so. So i'm happy that she is putting more. But also brought some concern.

I need to scan this graph, but up until 4700RPM, power/torque curves are smooth. But past that, it starts to become sort of jagged. like up and down in small increments. like saw blade. And its became rich. up until about 4300RPM, A/F is right around +-12.5, but after that, steadly going down, and at 4900RPM, its 12.0, and continues to become rich.
So i'm thinking may be up past 4500RPM or so, she is detnating, and ECU is backing out the timing. If thats the case, then by fixing that, i should put out few more HP.
But like i said, i'm happy that she made more then I thought(even with power rubbing side exhaust). 240.8hp, with 16% power train loss, i'm putting out like285.7hp at the crank. Its my first Dyno, and it was wierdest thing ever. Car is not moving, but my speedo is sating i'm like 135mph. and some smoke came out from pipe. which i was told somewhat normal. i'll scan graph later, and post them.

Oh only thing is that my ABS right came on. is that normal???
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jun 2, 2005
#2
  • Jun 2, 2005
  • #2
good numbers for only having midpipe and exhaust
 
M

mac1009

Founding Member
Feb 17, 2001
187
0
0
Atlanta, GA
Jun 2, 2005
#3
  • Jun 2, 2005
  • #3
Nice numbers. The ABS will turn off shortly, it's just because you were on the dyno.
 
L

LI-SVT

New Member
Apr 4, 2005
9
0
0
Jun 2, 2005
#4
  • Jun 2, 2005
  • #4
rear wheels spinning + fronts not = ABS light

Running rich with a jagged power curve sounds like the ignition couldn't keep up. Seems like you are getting a little misfire above 4700 RPM. Or the EFI went full rich causing the misfire. Try backing the A/F ratio down above 4500 RPM and see if it straightens out the plot.
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 2, 2005
#5
  • Jun 2, 2005
  • #5
ya. I guess next ajenda on my car is get tuner, and mess with it..

Oh and next time, I got to try 93 instead of 87 ElChepo gas i used...
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 2, 2005
#6
  • Jun 2, 2005
  • #6
Here is the graph scan
View attachment 512995
View attachment 512997
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 2, 2005
#7
  • Jun 2, 2005
  • #7
so anyone else have any idea as to what should I do?
 

DBMSTNG

I fantasize about it being BIG!
Founding Member
Apr 23, 2002
2,120
0
56
not quite here
Jun 2, 2005
#8
  • Jun 2, 2005
  • #8
run 91-93 octane. i also think it's pulling timing due to detonation.
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 2, 2005
#9
  • Jun 2, 2005
  • #9
thats what I figured. So if i get 93, whould prevent detnation, and timing will remain. thats what I'm hoping
 
S

SilverGTV8

New Member
Nov 30, 2003
295
0
0
West Brookfield, MA
Jun 3, 2005
#10
  • Jun 3, 2005
  • #10
Has anyone else noticed the graphs people are posting latly aren't right?

The torque curve and Hp are suppose to cross at 5252 because that is where they are equal according to the formula

(torque*RPM)/5252 = HP the RPM cancels out at 5252 thus making torque = HP

The shift of the curve skews the numbers.....
 

Red35th

Member
Apr 18, 2003
609
2
19
Houston, TX
Jun 3, 2005
#11
  • Jun 3, 2005
  • #11
The HP and TQE aren't on the same line. Look at the numbers on the far left and far right.

Good numbers by the way...auto fo life...
 
S

SilverGTV8

New Member
Nov 30, 2003
295
0
0
West Brookfield, MA
Jun 3, 2005
#12
  • Jun 3, 2005
  • #12
That would do it....

I hate that they do that more and more, at first glance the dyno numbers look skewed.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Jun 3, 2005
#13
  • Jun 3, 2005
  • #13
Good numbers, just get a chip and get it dyno-tuned next time to get rid of the detonation
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Jun 3, 2005
#14
  • Jun 3, 2005
  • #14
Ne1 know of good dyno tuners in central PA?
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
P
4 Hole Bosch Injectors max HP and Tune -4.6 PI
  • Png1978
  • Jul 23, 2022
  • SN95 4.6L Mustang Tech
Replies
1
Views
3K
SN95 4.6L Mustang Tech Aug 10, 2022
Chipss36
C
Progress Thread 2004 Comp Orange GT
  • ctandc
  • Jun 26, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
69
Views
6K
1996 - 2004 SN95 Mustang -General/Talk- Friday at 7:30 AM
ctandc
C
Erratic Run on a 2001...
  • My Copilot Zip
  • Sep 4, 2022
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Sep 27, 2022
MineralMan
Stiffer front springs writeup from the old .net site
  • LILCBRA
  • Oct 24, 2022
  • 1974 - 1978 Mustang II Talk & Tech
Replies
1
Views
2K
1974 - 1978 Mustang II Talk & Tech Oct 29, 2022
Enzio
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?