• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Just got new NAPA HARMONIC BALANCER....WoW read...

  • Thread starter Thread starter Xtreme Limits
  • Start date Start date Feb 14, 2004

Xtreme Limits

Founding Member
Nov 30, 2001
375
0
16
Hudson, Florida
Feb 14, 2004
#1
  • Feb 14, 2004
  • #1
First off, i got to say i love my mustang now , since i got my heads ported , F303 cam , Roller Rockers, and Ported lower, put in the car last spring, the first thing i found was more Hp & Tq , the car pulled hard to 5500rpm then slowly pulled to 6250rpm,(in 3,4,5th gears), and the car ran at 250*F, then we blew a T5 tranny, put a used one in that we got for free (was junk) but got my dad to work and back for 2 months, we finaly got a good tranny and put it in wensday, the car was shakeing like it had a bad motor mount or what we thought was the bad tranny, but we had a new tranny in and just didnt drive right, so came right home to find the problem , motor mounts like new, noticed all my bolts from the valve covers were almost all the way backed out, hmmmmm.... after 10mins. of looking, found out that the hermonic balancer went bad, so today dad went to napa got a new one and put it on , when he took the old one off it fell right apart in his hands, we both both looked at eachother and stated laughing .......

Anyway new one on went for a ride WOW pulls hard to 6,250rpm(stock revlimiter) and still wants to pull more rpms motor idles rock smooth , car doesnt even feel like it has a cam, we both know the car has never ran this good before from 5000-5500 fells like we gained 10-15more Hp, 55-6250 is were its night and day i say more around 30-40Hp no joke .......

We think the harmonic balancer was on its way out before we did all the motor work last year, and thouht it was the cam that made the car shake, butat first it wasnt too bad but compared to now umm... it was very bad , im posting this to help out others too, if your cars running rougher, not as powerfull, or doesnt rev check the balancer

car now needs a set of slicks cus my dad said it will be very close if not 12's , just a big change from a $70 part
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Feb 14, 2004
#2
  • Feb 14, 2004
  • #2
Xtreme Limits said:
just a big change from a $70 part
Click to expand...



Those cheap replacement balancers are usually only rated for 4,500rpm. Don't be surprised if you spin that one........
 

Xtreme Limits

Founding Member
Nov 30, 2001
375
0
16
Hudson, Florida
Feb 14, 2004
#3
  • Feb 14, 2004
  • #3
cevtv said:
Those cheap replacement balancers are usually only rated for 4,500rpm. Don't be surprised if you spin that one........
Click to expand...
Yeah i know, its only a short term fix till i sell my old van, or my heads in my sig., then im going to buy a fuild dampner , and mabey 2 smallish turbos
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Feb 14, 2004
#4
  • Feb 14, 2004
  • #4
When my stocker started to wobble, some people told me that "they just do that, it's part of thier 50oz imbalance" Well, I knew this was not right so I went all out and bought a Romac, it was over $200 but hey, what a difference. Sometimes I forget the RPM is too high. Except for the exaust note, the engine runs really smooth at higher rpms. The quality of the SFI units is so far better.

Yours was just completly gone. You are lucky you didn't mess up your main berrings. You probally put some unnessasarry wear no doubt, and I bet if you ever take that engine apart, you will see it, but you saved it in time. I'm glad you found the problem. It's funny how it's the little things that cause the big problems.
 
You must log in or register to reply here.

Similar threads

New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
293
The Welcome Wagon Oct 19, 2025
Clutchfork
Wanting to replace my BOSS 351C Engine Harmonic Balancer - Questions about 'Balance?'
  • 69machmike
  • Oct 31, 2024
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
598
1965 - 1973 Classic Mustangs -General/Talk- Nov 5, 2024
Realmongo
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Engine Cant get harmonic balancer puller to work… crank just spins
  • AnthonyA1234
  • Aug 26, 2023
  • Fox 5.0 Mustang Tech
Replies
17
Views
7K
Fox 5.0 Mustang Tech Aug 27, 2023
AnthonyA1234
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?