• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

just tried seafoam through the induction... and...

  • Thread starter Thread starter DogVomit
  • Start date Start date Dec 17, 2005

DogVomit

Member
Jun 9, 2005
192
1
19
Tampa, FL
Dec 17, 2005
#1
  • Dec 17, 2005
  • #1
I like it. My stang idles smoother than it ever did.
Yes, I could have joined that thread about seafoam. But I'm skeptical about introducing new products to my stang. Reading the reviews on this stuff, I thought I'd giver it a shot.

It's amazing! I use the old school method of detecting an ill tuned motor. I 3/4 cover a tailpipe with a towel and feel for the pops in the exhaust.

After I ran that stuff through my intake, it's gone.

It smoked for only about 2 minutes on and off. Heavy when I laid into it. Then it went away.

I dropped 3/4 can into the intake and 1/4 can into the oil.

I plan on doing this every 2 months.

Great results and the motor is probably thanking me. It can breathe.

Just wanted to post this, as I don't like adding anything aside of fuel injection cleaner and the odd octane boost when I buy a bad batch of gas.
 

SWRTstang

New Member
Jun 18, 2003
53
0
0
Laredo, TX.
Dec 17, 2005
#2
  • Dec 17, 2005
  • #2
Seafoam

I guess I have some reading to do.
 

DogVomit

Member
Jun 9, 2005
192
1
19
Tampa, FL
Dec 17, 2005
#3
  • Dec 17, 2005
  • #3
SWRTstang said:
Seafoam

I guess I have some reading to do.
Click to expand...

I think you're going to love this stuff. My stang was idling rough, pinging and bucking like son of a gun in 5th at 45-50 mph.

GONE... all of them. And the exhaust is a tight and steady rumble, instead of the ocassional fart.

I'm 100% sold on this stuff.
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Dec 17, 2005
#4
  • Dec 17, 2005
  • #4
SWRTstang said:
Seafoam

I guess I have some reading to do.
Click to expand...


Where the hell have you been?
There's been a post that's been building on here for months about that stuff.
Seafoam rocks.
 

stangGT97

New Member
Dec 22, 2004
1,299
1
0
Boston area, MA
Dec 17, 2005
#5
  • Dec 17, 2005
  • #5
DogVomit said:
I think you're going to love this stuff. My stang was idling rough, pinging and bucking like son of a gun in 5th at 45-50 mph.

GONE... all of them. And the exhaust is a tight and steady rumble, instead of the ocassional fart.

I'm 100% sold on this stuff.
Click to expand...

you're running a SC and your car is pinging? shouldnt you be a little more worried about that?
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 17, 2005
#6
  • Dec 17, 2005
  • #6
I may need to try this stuff, sounds like it did wonders for you. Is WOT feeling any better?

Mine doesnt ping, and the slight bucking is from the cams (I think). But I do have idle problems sometimes, especially after going WOT for a little while and then coming to a stop...it was dieing durring my breaking last time to the track. Fluctuating 500-900 tonight after WOT and then pushing the clutch in...goes away after you take back off though.
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Dec 18, 2005
#7
  • Dec 18, 2005
  • #7
Seafoam is the ****. However, I've never put it on the oil and never will. Through the intake and in the gas tank only for my car.
 

Nater

New Member
Sep 5, 2003
239
0
0
Maplewood, MN
Dec 18, 2005
#8
  • Dec 18, 2005
  • #8
Bring back the other thread!!
 
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
Dec 18, 2005
#9
  • Dec 18, 2005
  • #9
I like the farts
 

SWRTstang

New Member
Jun 18, 2003
53
0
0
Laredo, TX.
Dec 18, 2005
#10
  • Dec 18, 2005
  • #10
menasci said:

Where the hell have you been?
There's been a post that's been building on here for months about that stuff.
Seafoam rocks.
Click to expand...




I just finished reading/looking at the 13 page Thread. I need to go buy 2 bottles of this stuff. I want to see how bad it will smoke with 28,500 miles of abuse, should make for a good smoke show.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 18, 2005
#11
  • Dec 18, 2005
  • #11
I have 34K (make that 35.5) on my 04 lol...you must not drive it much . I havnt even changed the fuel filter lol...I think it may need it though.
 
B

bakos24

I find there is nothing better than a tasty wiener
Nov 29, 1999
4,461
87
134
NE, OH
Dec 18, 2005
#12
  • Dec 18, 2005
  • #12
Horay, another seafoam thread . a few more pages of this and I might have to try some out...im still not truly convinced yet.
 

DogVomit

Member
Jun 9, 2005
192
1
19
Tampa, FL
Dec 18, 2005
#13
  • Dec 18, 2005
  • #13
hotmustang331 said:
I may need to try this stuff, sounds like it did wonders for you. Is WOT feeling any better?

Mine doesnt ping, and the slight bucking is from the cams (I think). But I do have idle problems sometimes, especially after going WOT for a little while and then coming to a stop...it was dieing durring my breaking last time to the track. Fluctuating 500-900 tonight after WOT and then pushing the clutch in...goes away after you take back off though.
Click to expand...

WOT feels much more solid.
As far as the other post about being supercharged with ping/detonation... yes I was very converned.

Looks like seafoam cleared it up. Last night after the treatment, I ran it and it went sideways in 2nd at only about 3000 RPM's.

I just like how smooth this motor runs now.

I'm totally sold, as opposed to being scheptical.

In the old days, I sprayed gunk into my 4 barrel carb and manually raised the RPM's. It was a smole show then too. The results paid off then, and they do with this seafoam stuff today.

Good stuff. Great job on creating a product that actually cleans the throttle body so thouroughly.
 

SWRTstang

New Member
Jun 18, 2003
53
0
0
Laredo, TX.
Dec 18, 2005
#14
  • Dec 18, 2005
  • #14
hotmustang331 said:
I have 34K (make that 35.5) on my 04 lol...you must not drive it much . I havnt even changed the fuel filter lol...I think it may need it though.
Click to expand...

I drive it mainly on weekends and to/from the track.
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Dec 18, 2005
#15
  • Dec 18, 2005
  • #15
When you say put it "through the intake", exactly where are you adding it?
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Dec 18, 2005
#16
  • Dec 18, 2005
  • #16
I am guessing either the PVC valve or the little onewith two red lines coming off of it.
 

SWRTstang

New Member
Jun 18, 2003
53
0
0
Laredo, TX.
Dec 18, 2005
#17
  • Dec 18, 2005
  • #17
All you need to know about using Seafoam.

http://forums.stangnet.com/showthread.php?t=561567

 
C

cooter_11

Member
Apr 22, 2005
138
0
16
GA
Dec 18, 2005
#18
  • Dec 18, 2005
  • #18
You can suck it in through any vacuum line that leads to the manifold, but the PCV is the best spot. Also, has anyone else ever tried the GM Top Engine Cleaner or am I the only one?? That stuff is way better than seafoam.
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Dec 19, 2005
#19
  • Dec 19, 2005
  • #19
bakos24 said:
Horay, another seafoam thread . a few more pages of this and I might have to try some out...im still not truly convinced yet.
Click to expand...

who cares, for 5 bucks and 5 minutes of youre time what have you got to lose?

btw i seafomed a buddy's 94 5.0, and he said it made a huge improvement.

its reccomended after running the seafoam through the car, to replace the spark plugs as well, as they can get fouled up when all the carbon is getting pushed out the motor.

i need to do a tune up on my car(80k) in a bit here, gonna change all filters(re-oil my intake filter), change all fluids, plugs + wires, and run some seafoam through it.
 
You must log in or register to reply here.

Similar threads

1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
592
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
165
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
719
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
509
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?