• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

K-member

  • Thread starter Thread starter mustangsally93
  • Start date Start date Jun 9, 2006

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Jun 9, 2006
#1
  • Jun 9, 2006
  • #1
What is the point of the k member. I was looking in a few mags and I can't see the real point of them. I got a 93 lx and I want to know if I should get one before the new motor and every thing. thanks.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jun 9, 2006
#2
  • Jun 9, 2006
  • #2
to lighten the front end......i need one really bad because my factory one is rubbing against the headers
 
R

R2D2

Jun 9, 2006
#3
  • Jun 9, 2006
  • #3
I use a tubular K member to offset the big blocks weight
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jun 9, 2006
#4
  • Jun 9, 2006
  • #4
Also, it frees up some space, not to mention it looks better, if your into that kinda thing. As far as performance, some of them are alot stronger than stock i believe, so if road racing/Auto X is your thing...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 9, 2006
#5
  • Jun 9, 2006
  • #5
Clearance for 7qt oil pans / LT headers. Some also move the front wheels forward for some reason.

Bigest savings is like 60lbs of weight removal.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jun 9, 2006
#6
  • Jun 9, 2006
  • #6
88Stang331 said:
Also, it frees up some space, not to mention it looks better, if your into that kinda thing. As far as performance, some of them are alot stronger than stock i believe, so if road racing/Auto X is your thing...
Click to expand...

I'd say with perhaps an exception to the maximum motorsports unit (I believe it's has practically no weight savings), all tubular aftermarket k-members are structurally more rigid….yet not as strong as the stock unit. In other words…they wont flex as much yet will fail in conditions where the stock unit will just flex and survive.
 

payupsucka

Member
Sep 28, 2003
324
0
16
Keeping it grimy in Fall river MA.
Jun 9, 2006
#7
  • Jun 9, 2006
  • #7
dropping weight, and freeing up space. also, i think the maximum motorsports ones acutally give you better suspension geometry. and they allow for you to move the engine forward or rearward a little to help with weight bias.
 

s&k stangs

New Member
May 24, 2006
0
0
0
MOnroe, Nc
Jun 9, 2006
#8
  • Jun 9, 2006
  • #8
s,w,b

suspension-some change the geometry of the suspension alllowing the car to handle better in road course conditions

weight-most are lighter than the stock unit, aiding in acceleration, and more rigid, again helping in the handling area

balance-alot of tubular k-members allow the engine to site further back in the engine compartment and a little lower as well, changing the center of gravity of the car, again making the car handle better in the curves. the ideal road course car has as close to a 50/50 weight ratio as possible(50%of the weight on the fromnt half, 50% percent in the rear portion of the car).this gives all 4 tires equal traction in braking and acceleration. Talk to anyone who has one that is installed properly, and they'll tell you they love them, but installing them aint cheap or easy, so before you go buying one just because you see them in the magazines alot, you want to find alot of people who have them, and get estimates on cost and downtime on the car. If you have the money, have one put in while the engine bay is empty waiting for the new motor. just my opinion.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 6, 2006
#9
  • Jul 6, 2006
  • #9
S&k stang - The balance won't be even on all four tires during acceleration (more towards back and/or sides)...or during braking (more towards front and/or sides)...

Anyone know the exact savings for any particular brand?
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Jul 7, 2006
#10
  • Jul 7, 2006
  • #10
I have the GMS unit. It moves the wheels forward and inch, and has two positions for moving the engine either in the stock location or more to the rear.

With a K-member, you usually get better suspension geometry, more clearance, and less weight.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,077
1,659
194
NJ
Jul 7, 2006
#11
  • Jul 7, 2006
  • #11
The really good ones like the Kenny brown, griggs and MM save almost no weight, because that's how much material it takes to make it as strong or stronger than the stock one.

D&D, qa1, and upr are weaker than stock. Fine for drag racing, and a weekend toy, but don't drive year around on them. They will crack, NJ roads tear these up.

The AJE and PA racing ones are pretty good, middle of the line.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 7, 2006
#12
  • Jul 7, 2006
  • #12
So how much does a factory k-member weigh? MM, Kenny Brown, Griggs?
 

Don Fiveolio

New Member
Apr 23, 2005
85
0
0
Houston, TX
Jul 7, 2006
#13
  • Jul 7, 2006
  • #13
What's the average cost of installation for a k-member. I know there are some that take stock a-arms.
 

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,240
2,948
224
Vass, NC
Jul 10, 2006
#14
  • Jul 10, 2006
  • #14
subscribing...

What else should be done while I don't have an engine in my engine bay? I know engines... I know nothing about suspension. I plan on calling MM tomorrow. I'll let ya know what they say.

Chris
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Jul 11, 2006
#15
  • Jul 11, 2006
  • #15
I would think that if the car is anything resembling a daily driver you wouldn't be focused on weight savings. I plan on swapping out mine just for a better front suspension setup. I'd hate to think that I put a weaker k-member in just to save a few pounds only to have it cracked up and then having to go through the process of replacing it - again. $$$$$$$$
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Jul 11, 2006
#16
  • Jul 11, 2006
  • #16
MM is 14lbs lighter than stock. Put on their control arms and now your down 24lbs from stock.

http://www.maximummotorsports.com/
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Jul 11, 2006
#17
  • Jul 11, 2006
  • #17
That's the setup I'm looking at. Besides, there's other ways to reduce weight off the front end without stucturally weakening the vehicle. Who needs A/C anyway?
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Jul 11, 2006
#18
  • Jul 11, 2006
  • #18
Lots of good insight in here.

Only thing I will add is that if you are going with a non-OEM K member on a street-driven or daily-driven car, check with your insurance company beforehand.

I have seen collision claims denied before because the uniform structure of the vehicle was not as the insurance company expected (unmodified), despite the improved strength and integrity most aftermarket pieces deliver.

Just food for thought.
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jul 11, 2006
#19
  • Jul 11, 2006
  • #19
millhouse said:
I'd say with perhaps an exception to the maximum motorsports unit (I believe it's has practically no weight savings), all tubular aftermarket k-members are structurally more rigid….yet not as strong as the stock unit. In other words…they wont flex as much yet will fail in conditions where the stock unit will just flex and survive.
Click to expand...

"making ours the absolute highest in quality,durability and strength while reducing 75lbs." - www.dndmotorsports.com
 
You must log in or register to reply here.

Similar threads

R
Suspension Bushings for SN95 Steering Rack with UPR K Member
  • Riley Barth
  • Jun 23, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
294
Fox 5.0 Mustang Tech Jul 8, 2026
Noobz347
C
93 Tubular A Arm Bushings
  • Chrispy62
  • Jul 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
143
1996 - 2004 SN95 Mustang -General/Talk- Jul 31, 2026
Chrispy62
C
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
526
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?