Kenne Bell 2.1 Capable of 500hp+?

Okay so I am curious as to what people have been able to get out of the 2.1 KB kit. I have heard tons of information about how restrictive the inlet is on the 2.1 for the 2V guys. I'd like to know if this blower is even able to get you 500+ with the stock heads and cams. I see a lot of people hitting 425 and such on the stock motor but haven't really seen many people talking about this setup on a built motor. This will be going on a built motor so no worries about things blowing up or anything like that. Also, I plan to run 42lb injectors from a cobra tank and dual pump with the KB BAP.

I know the KB site shows 521 or so on a stock motor but I honestly don't believe much of the dyno sheets they post up on their site.

Thanks for the info guys.

Flghtmstr1 said:

The compressor itself is certainly capable of supporting 500 horsepower. As for the rest of the kit, not so much.

Click to expand...

So what exactly do you mean by the rest of the kit? Keep in mind I will be running larger injectors, a bigger intake, as well as a 14psi+ pulley.