• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Koni’s

  • Thread starter Thread starter Reddevil91
  • Start date Start date Feb 27, 2018
Prev
  • 1
  • 2
First Prev 2 of 2

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Feb 28, 2018
#21
  • Feb 28, 2018
  • #21
Reddevil91 said:
For the coil overs I’m guessing one would surely have to have adjustable struts correct.
Click to expand...
Nope. You don’t have to have adj struts. I would recommend but again if you are never going to race/change the settings, etc then plain Jane struts work fine. The MM coil overs are designed for specific brands(Koni is one of them) so you won’t have much noice/rattling etc. Also I highly recommend some frame connectors even if you don’t race. Always nice to stiffen the chassis on a subframe car.
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Feb 28, 2018
#22
  • Feb 28, 2018
  • #22
A5literMan said:
Nope. You don’t have to have adj struts. I would recommend but again if you are never going to race/change the settings, etc then plain Jane struts work fine. The MM coil overs are designed for specific brands(Koni is one of them) so you won’t have much noice/rattling etc. Also I highly recommend some frame connectors even if you don’t race. Always nice to stiffen the chassis on a subframe car.
Click to expand...
Cool thanks for the info. So I know the subframes he has say bolt on, and that I can get them welded which I would do. Would you say those are worth it or just stick to the full length MM ones?
 

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Feb 28, 2018
#23
  • Feb 28, 2018
  • #23
I like the full length weld ons
 

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
767
1,319
154
Bloomingdale N.j.
Feb 28, 2018
#24
  • Feb 28, 2018
  • #24
I went with the Koni''s and Eibach proline springs, both fit my budget and needs. I'm happy with the height and as mentioned the Koni str.t shocks and struts are an improvement over the factory and lower end stuff but have no adjustability which was fine for what I use the car for.......which is basically not much
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Feb 28, 2018
#25
  • Feb 28, 2018
  • #25
Ok so went to check out the struts and shocks and I don’t have much experience but they seemed soft like easy to compress. One of the struts compresses and then really didn’t want to rebound. I decided to wait and see if this is how they should feel. I was compressing them easily with one arm as you can see. Something told me to pass and see what others thought.
View: https://youtu.be/RcvV9YKLI3A


View: https://youtu.be/9eyUVkoLBms
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Feb 28, 2018
#26
  • Feb 28, 2018
  • #26
Jersey Joe said:
I went with the Koni''s and Eibach proline springs, both fit my budget and needs. I'm happy with the height and as mentioned the Koni str.t shocks and struts are an improvement over the factory and lower end stuff but have no adjustability which was fine for what I use the car for.......which is basically not much
Click to expand...
What was the softness on your struts and shocks when you got them?
 

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
767
1,319
154
Bloomingdale N.j.
Feb 28, 2018
#27
  • Feb 28, 2018
  • #27
I'll be perfectly honest with you because they were new I really didn't play around with them at all, just slapped them in after fighting with the damn coil springs, but my experience with other shocks is that they don't take a whole lot to compress but if your nervous at all just get new ones.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
976
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
P
rear Impact absorbers.
  • Praetorious
  • May 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2026
Praetorious
P
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
316
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?