LarsD's build thread

1bad67sbf · Jul 28, 2011

i thought thats what a sick day was made for.

LarsD · Jul 28, 2011

1bad67sbf said:
i thought thats what a sick day was made for.

Nah, can't do that. Cause when they make me work Saturday and Sunday, I don't get OT then. Plus, I've only used like 16 sick hours in the last ten years. Add that to the engine showing up at work last week, they are going to know whats up.

citmov · Jul 29, 2011

Still jealous! Get on that build and have fun!

LarsD · Jul 30, 2011

What do you guys think? Can I get away with running this stuff in my TKO:

Royal Purple Synchromax Mustang Manual Transmission Fluid at AmericanMuscle - Free Shipping!

Or do I need to track down some actual Syncromesh.

1995 5.0 · Jul 30, 2011

I've ran the royal purple stuff in my tko since i got it in 2006. I had the shift lug problem in my car and I needed to call tremec to get the replacment parts. I told the tremec rep that I used it in my car and he didn't say anything about so I don't think it would hurt anything to use it.

JamesB88 · Jul 30, 2011

Never ran the Royal purple stuff. I've alwas just went to local Chevy dealer and bought syncromesh, its like 5 bucks a quart.

LarsD · Jul 30, 2011

JamesB88 said:
Never ran the Royal purple stuff. I've alwas just went to local Chevy dealer and bought syncromesh, its like 5 bucks a quart.

I thought it was closer to $10 a quart, I'll probably just get the syncomesh then.

JamesB88 · Jul 31, 2011

It may be closer to 10. there is a guy on one of the local forums that I post on that offers discounts on things from the dealer he works from.

Boosted92LX · Jul 31, 2011

LarsD said:
I thought it was closer to $10 a quart, I'll probably just get the syncomesh then.

Just and FYI Lars- and you proooobably know this already, but.

There was a show on Spike tv, on powerblock. Not sure which one. These fellas put a car on a chassis dyno, and made a few base pulls. They then drained all the fluids,engine, trans, diff, and replaced them with royal purple.
Back on the dyno, picked up something like 11-12 hp.

I don't know if it was BS because they were sponsered by RP, but I was always amazed by that.

NIKwoaC · Jul 31, 2011

SSeater said:
Just and FYI Lars- and you proooobably know this already, but.

There was a show on Spike tv, on powerblock. Not sure which one. These fellas put a car on a chassis dyno, and made a few base pulls. They then drained all the fluids,engine, trans, diff, and replaced them with royal purple.
Back on the dyno, picked up something like 11-12 hp.

I don't know if it was BS because they were sponsered by RP, but I was always amazed by that.

What fluids were in the car before?

I've seen tests like that before, and sometimes they fail to mention that they also went to a lower weight oil than what was originally in the car. That, and, we've all seen a car vary 10+ hp on consecutive runs, with no tuning or other changes.

That said, I do believe that there is some power to be had with a good synthetic oil, I just think sometimes those dyno tests are a smoke and mirror show, know what I mean?

LarsD · Jul 31, 2011

SSeater said:
Just and FYI Lars- and you proooobably know this already, but.

I've seen these stories before. I do think synthetics are great as I have seen them save engines from disaster, increase fuel mileage, etc. Mostly just want whats best for the trans.

NikwoaC said:
That said, I do believe that there is some power to be had with a good synthetic oil, I just think sometimes those dyno tests are a smoke and mirror show, know what I mean?

This is also true. I already have Mobil 1 in the diff, as that is some slick stuff.

I need to get out in the garage and get started. It's 115 degrees out there right now. lol

LarsD · Jul 31, 2011

I was going to come in here and make a post asking if you guy think I should chance a 2 year old water pump with about 6K miles on it. Then I got it off the car and saw staining on the weep hole. Could have been when one of the crossover hoses split a couple months ago. Do I really want to risk a new engine to save $40 though? Back to AM I go. How many quarts of that RP you guys think I need?

NIKwoaC · Jul 31, 2011

Water pumps are cheap, and they are soooo much easier to install when the engine is out of the car!

JamesB88 · Jul 31, 2011

a TKO600 take around 2.5 quarts if I rember correct, order 3 and you'll have some left of one.

LarsD · Jul 31, 2011

NikwoaC said:
Water pumps are cheap, and they are soooo much easier to install when the engine is out of the car!

Yeah, cheap insurance. Gonna get one of those FMS pumps for $40.

JamesB88 said:
a TKO600 take around 2.5 quarts if I rember correct, order 3 and you'll have some left of one.

That little? Shoot, I figured it took at least 3.8 if not more.

LarsD · Jul 31, 2011

My shop is a wreck. Half of it is parts waiting to go on the car.

Think I need a new AITS?

Getting there:

The things you have to do to pull and engine by yourself.

Almost out.

Finally. Note, it helps to remember the two lower block plate bolts when trying to separate an engine from a T5, rather then yanking around on it for 20 minutes like a jerkarse wondering wtf is going on.

Getting the trans out took like 10 minutes.

Now I get to start cleaning. Also ran over on the miles for my WRX. So now I gotta go change the oil on it. Then I can shower and relax before work tomorrow.

darthcual · Jul 31, 2011

Nice work lars. Glad I'm not the only one who got a good Texas sweat on this weekend.

LarsD · Aug 2, 2011

Local GM stealership wants $17.50 a quart for Syncromesh. lol

AM gets some more of my money then.

Stever89 · Aug 2, 2011

God How I Love a Big, Nice, Clean, Shop.

NIKwoaC · Aug 2, 2011

LarsD said:
Local GM stealership wants $17.50 a quart for Syncromesh. lol

AM gets some more of my money then.

Sometimes I think the dealerships almost don't want to sell stuff.

LarsD's build thread

1bad67sbf

Active Member

LarsD

citmov

LarsD

1995 5.0

New Member

JamesB88

Member

LarsD

JamesB88

Member

Boosted92LX

It's only an inch or two. What's the big deal?

NIKwoaC

中國製造

LarsD

LarsD

NIKwoaC

中國製造

JamesB88

Member

LarsD

LarsD

Attachments

darthcual

Member

LarsD

Stever89

NIKwoaC

中國製造

Similar threads

LarsD's build thread

Active Member

New Member

Member

Member

It's only an inch or two. What's the big deal?

中國製造

中國製造

Member

Attachments

Member

中國製造

Similar threads

Privacy & Transparency

Privacy & Transparency