Lifters (Help)

player4lifeov · Oct 11, 2006

So i take my car to a shop and they hear the clicking sound of my car, so he puts it on his smog dyno and i keep it at 2500 rpms or so and hey says its coming straight from below the intake manifold and that he's almost 100% sure its the lifters cuz the noise goes aways after i pass 3000 rpms. Anyone know if the lifters require removing the camshaft? Or what technicalities go into this. I have a 1999 mustang gt manual. Also where can i get lifters from?
HELP Please

RedDaemon · Oct 11, 2006

MYSTERY OIL!

no need to change the lifters if theyre just making noise

buy some. try it. if it dont work come back here

player4lifeov · Oct 11, 2006

So do u have to take off the cams for this install cuz some guy wants to charge me about 1200 dollars or so!! Im not mechanically inclined and i want to fix that clicking sound!! if it requires the removal of the cam then i might as well install my vt stage 1 na cams!! How hard is the labor on this? sorry for asking so many questions

RedDaemon · Oct 11, 2006

the labor is opening a bottle of this stuff:

View attachment 434024

its just a noise, that doesnt mean theyre crap. of course if u want to replace them then by all means go for it

98armygt · Oct 11, 2006

i got the same problem. when i get to about 2k on the rpm it here the clicking noise. just started last night. i pulled my valve cover off and im certain you have to pull the cam shaft off to get to them. its only 8 bucks a piece to replace a lifter. it doesnt look to hard to do. i should have my done by sat or sun. gotta wait till payday.

98armygt · Oct 11, 2006

yea its just a noise but its an annoying noise at that. you cant always throw thicker oils and stuff like that just to make the sound go away. i would replace the lifter if thats your problem player4lifeov.

RedDaemon · Oct 11, 2006

98army, ur saying u HEAR it when u wind it up...player is sayin it goes away when he winds his car up

jasonh_86 · Oct 11, 2006

you don't have to pull the cams i don't think.. but i could be wrong.

You may want to release pressure on the cam caps to allow the cams to come up off the lifters and rockers a bit. Then slide the rockers out, pull the lifters out of their little hole.. then swap them out.

Shouldn't take very long.. Maybe 1-2 hours

I had the cams, lifters and rockers out of my old motor in about 10 minutes

RandyStinchcomb · Oct 12, 2006

player4lifeov said:
hey says its coming straight from below the intake manifold and that he's almost 100% sure its the lifters(

.

first, find another shop. the lifters on a OHC engine are under the cam covers, not under the intake. any "ticking" noise heard around the intake is prob just injector tick.
what weight engine oil do you use?

stangGT97 · Oct 12, 2006

RandyStinchcomb said:
.

first, find another shop. the lifters on a OHC engine are under the cam covers, not under the intake. any "ticking" noise heard around the intake is prob just injector tick.
what weight engine oil do you use?

he probably thinks you have a pushrod engine. The injectors are loud and can easily be mistaken for some sort of valve train noise.

RandyStinchcomb · Oct 12, 2006

stangGT97 said:
he probably thinks you have a pushrod engine. The injectors are loud and can easily be mistaken for some sort of valve train noise.

your calling me stupid yet you still agree wth me, I think

stangGT97 · Oct 12, 2006

RandyStinchcomb said:
your calling me stupid yet you still agree wth me, I think

haha no Randy I'm not calling you stupid, not at all. Thats the only icon they have for "I agree w/ the above" (at least thats how I interpret it). I wish they had one that wasn't so ambiguous

Your advice > gold haha

RandyStinchcomb · Oct 12, 2006

stangGT97 said:
haha no Randy I'm not calling you stupid, not at all. Thats the only icon they have for "I agree w/ the above" (at least thats how I interpret it). I wish they had one that wasn't so ambiguous

Your advice > gold haha

ok wee-bee cool when you hit my age, well..... sometimes you get a little thin-skined among other things

stangGT97 · Oct 12, 2006

RandyStinchcomb said:
ok wee-bee cool when you hit my age, well..... sometimes you get a little thin-skined among other things

yeah, well I can understand how you could take that the wrong way. But I wouldn't come to MD to ask your advice on plugs, then take your advice and buy them from you if I thought you were stupid. Thanks again btw, that'll give me something to do this weekend.

RandyStinchcomb · Oct 12, 2006

stangGT97 said:
yeah, well I can understand how you could take that the wrong way. But I wouldn't come to MD to ask your advice on plugs, then take your advice and buy them from you if I thought you were stupid. Thanks again btw, that'll give me something to do this weekend.

ahhh ****, it's Dan sorry, Im allfull wth names

stangGT97 · Oct 12, 2006

RandyStinchcomb said:
ahhh ****, it's Dan sorry, Im allfull wth names

haha its ok Randy, you do a lot of business with lots of different people on MD. I'm pretty awful with names myself anyway

98armygt · Oct 12, 2006

ok sorry about that i misread it. sorry about that. yea mine really comes on at around 2k and just gets faster with the rpm. pain in the butt. but i talked to someone today and said that i didnt have to pull the cam out just rotate it till bottom circle of that lobe is over the follower. then just pull that stuff out. sounds simple enough to me. we will see how it goes. maybe i should do a write up on how to do one of these. whatcha think?

stangGT97 · Oct 12, 2006

98armygt said:
ok sorry about that i misread it. sorry about that. yea mine really comes on at around 2k and just gets faster with the rpm. pain in the butt. but i talked to someone today and said that i didnt have to pull the cam out just rotate it till bottom circle of that lobe is over the follower. then just pull that stuff out. sounds simple enough to me. we will see how it goes. maybe i should do a write up on how to do one of these. whatcha think?

If you're up for it, we could always use some quality write ups to put in the sticky.

98armygt · Oct 12, 2006

alright ill do my best with it. ill include torques if needed and so forth. i already got my valve covers off so its gonna have to start there. hopefully by sun ill have it posted here and the moderators can sticky it.

stangGT97 · Oct 12, 2006

98armygt said:
alright ill do my best with it. ill include torques if needed and so forth. i already got my valve covers off so its gonna have to start there. hopefully by sun ill have it posted here and the moderators can sticky it.

Awesome man, I appreciate you taking the time to do this.

Lifters (Help)

player4lifeov

New Member

RedDaemon

player4lifeov

New Member

RedDaemon

98armygt

New Member

98armygt

New Member

RedDaemon

jasonh_86

I

RandyStinchcomb

New Member

stangGT97

New Member

RandyStinchcomb

New Member

stangGT97

New Member

RandyStinchcomb

New Member

stangGT97

New Member

RandyStinchcomb

New Member

stangGT97

New Member

98armygt

New Member

stangGT97

New Member

98armygt

New Member

stangGT97

New Member

Similar threads

Lifters (Help)

New Member

New Member

New Member

New Member

I

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency