• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

lil help with 95 gt

  • Thread starter Thread starter 383blaze
  • Start date Start date Mar 22, 2008

383blaze

New Member
Mar 22, 2008
11
0
0
Mar 22, 2008
#1
  • Mar 22, 2008
  • #1
my wifes car is a 95 gt mustang 5.0,having problems with the car idling,,when cold or warm the idle surges until the car quits,even when going down the road,,as soon as the rpms go back to idle position,it starts surging and then quits,tryin to save all the hassle of just changing sensors at random,just if anyone has had this problem b4,,could save me some cash and time,,,much appreciated,,o yea,,im getting no chk engine light either,,wouldnt one of these sensors set the warn light off?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 22, 2008
#2
  • Mar 22, 2008
  • #2
Welcome to the boards.
You will still want to pull codes, as the CEL need not be illuminated for codes to be stored. Your 95 GT's data link connector is on the passenger side of the engine compartment between the firewall and strut tower (dont use the OBD-II port inside the cabin).

The 94-95's use a load-based processor which relies heavily on the MAF. If you havent, you might want to check the MAF/air inlet connections and consider cleaning the MAF wires.

If the car has any modifications to it, use the signature feature to list them. Mods change recommendations/advice.

Good luck.
 

383blaze

New Member
Mar 22, 2008
11
0
0
Mar 22, 2008
#3
  • Mar 22, 2008
  • #3
do i have to go to the dealer for me to chk the codes?i checked the maf sensor,,looks new to me,all wires clean,etc
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 23, 2008
#4
  • Mar 23, 2008
  • #4
383blaze said:
do i have to go to the dealer for me to chk the codes?i checked the maf sensor,,looks new to me,all wires clean,etc
Click to expand...

You can pull codes yourself with a jumper wire.

Just in case the MAF wires reference was a little ambiguous, here's a write-up with pics about that.
 

383blaze

New Member
Mar 22, 2008
11
0
0
Mar 24, 2008
#5
  • Mar 24, 2008
  • #5
the write up was it,,thats what i needed ,,a how to,,,but thats what it was,,cleaned it with carb cleaner,,no q tip,,im not touching that wire,but it worked,,yay,thanks for the help
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
616
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
319
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
685
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?