list update

[mustang6tee8]

ok, with yall's suggestions, here's my updated list:

O/R H, rear lower control arms, Cobra upper/lower, FRPP 3.73's, headers, and i won't be needing nitrous...


what is a good set of non-coated headers for around $200?
whats the best rear lower control arms for around $200?
will camber/caster plates be necessary when lowering car about 1.25" to 1.5"?
what is a good brand for an O/R H?
my budget is around $1000, i'll be doing the work myself

thanks for the input!

PS-heads and cam will be done this summer

 

[final5-0]

I see you are gonna be doing the mid pipe.

Since you are doing it along with headers .................

Have you considered LT's?

They really help your low to mid rpm range.

Grady

 

[mytight95]

i agree with grady..... if you don't go with long tubes first you will want to later after the HCI.....so i would go ahead and go that route....

BBK long tubes and mid pipe for 94-95 around 400 for both.....

Look into the PR03I control arms here on partshopper....seem to be high quality copies of MAximum Motorsports but without the 400$ price tag...

Honestly i cannot answer you about the c/c plates but i bought a set just to keep my tires from wearing one side......lol


jason