• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

little Sticker Shock on Cost of Paint Job

  • Thread starter Thread starter palerider94
  • Start date Start date May 18, 2008
P

palerider94

Member
Feb 21, 2006
573
1
19
May 18, 2008
#1
  • May 18, 2008
  • #1
Had a guy I've been talking to off on for a couple years now came by and give me and estimate on painting car and putting back together. Lot more expensive than I thought it would be. Guy has a small mustang junk yard and is known thru local cruise areas as a good body guy that does work out of his home. Basically estimate he gave me was $7500 which include.

1. Stripping to bare metal
2. Putting new skins and lower qtr patch panel
3. Putting cowl back on
4. Putting body panels on and aligning gaps
5. Paint/clear coat and wet sanded and polished (jambs, trunk, etc)
6. Included transporting car


Guy does not have a paint both but does good work seen a couple cars they came out nice.

What do you think?
 
S

suki243

Member
Dec 19, 2006
662
0
19
Southern California
May 18, 2008
#2
  • May 18, 2008
  • #2
Sounds like a nice deal. I paid 6k for mine that included new bumpers, stripping the whole car down, straightening the panels, repainting the car and replacing trim stuff.

People consider that a good deal.

Edit:
Yup, this all took place in southern california
 
1

19simmons65

New Member
Apr 2, 2005
214
0
0
Upper Marlboro, MD
May 18, 2008
#3
  • May 18, 2008
  • #3
What part of the country are you in? I paid a lot more for my 65 but I was living in Cali at the time. Sounds like a good deal...especially if you have seen his work.
 
P

palerider94

Member
Feb 21, 2006
573
1
19
May 18, 2008
#4
  • May 18, 2008
  • #4
Hmm - feel a little better. I'm in Northwest Indiana. Nice thing is that he does basically only mustangs and knows his stuff. He pointed out a couple things on the car that I never noticed.
 

jb1dsl

Member
May 24, 2004
566
0
17
Marianna, Fl.
May 18, 2008
#5
  • May 18, 2008
  • #5
Does not sound too bad for all that work, especially if you have seen his work and are satisfied with it. I stripped my own car and had alot more hours in it than I thought it would take from paint to metal to epoxy primer. Cost per hour stacks up real quick
 

zookeeper

Founding Member
Aug 25, 2001
3,415
63
109
Rogue River, Oregon
May 18, 2008
#6
  • May 18, 2008
  • #6
That's a bargain for what he's promising. Here's my rule of thumb: paint and interior affect the value of a vintage car by at least 60%. Therefore you should budget 60% of your restoration funds towards paint and interior. If you think you'll spend $20,000 on your full-on restoration (not at all unreasonable these days) then you can count on spending $12,000 of that on paint and interior.
 

jlangholzj

Mustang Master
Oct 23, 2006
248
31
93
MI
May 18, 2008
#7
  • May 18, 2008
  • #7
sound about right, since i really didn't need any bondo, body panels, metal work (jealous yet? ) done on mine, a guy over here estimated 4-5K to block and paint the whole thing.
 
T

tweet66

Founding Member
May 19, 2001
589
0
17
Pennsauken, NJ
May 19, 2008
#8
  • May 19, 2008
  • #8
I paid $6000 12 years ago for paint and body work on my 66 coupe. I was suposed to get new quarters, lower door skins and fender patches and a replacement trunk lid, and down to bare metal. I got the car back with a week to look over it and load it on a trailer for Florida. About a year later the doors started popping, the quarters looked super wavy, and the lower fenders just about fell off! I wound up replacing everything myself in the garage and repainting the entire car. Found the quarters had been patched in three seperate areas each and the doors and fenders bondo'd up over 3/4" thick??? The trunk lid had more rust than my original and there were at least 2 other paint jobs on the car that were only scuffed and sealed... I tried to find the guy when I moved back to Jersey but he closed shop and moved two towns over. When I found the new place, he'd been closed by the local code enforcement for complaints and non-compliance to state regs. I put my name on the list of compliants but nothing ever came of it. If I knew that $7500 would get me all that I'd spend it in a heart beat
 

SadbutTrue

Founding Member
May 1, 2002
2,390
4
49
Granada Hills, California
May 19, 2008
#9
  • May 19, 2008
  • #9
wow, that shows me the value of having my dad paint my car...

i guess for a quality job that isn't out of line. hope you're getting some nice shelby stripes or something, lol
 
T

truck90278

New Member
Jun 4, 2006
382
1
0
Redondo Beach, CA
May 19, 2008
#10
  • May 19, 2008
  • #10
cheap price - assuming work is done correctly. The paint on our car, just for the base color, not including activiatiors, clear etc. runs $150/gal. It's not unusual to have a couple of grand in materials alone.
 
T

tweet66

Founding Member
May 19, 2001
589
0
17
Pennsauken, NJ
May 19, 2008
#11
  • May 19, 2008
  • #11
SadbutTrue said:
wow, that shows me the value of having my dad paint my car...
Click to expand...


Sad, the guy's sister and brother in law live 2 houses down from my parents. I always keep an eye out at holiday's and family get togethers so I can have a "friendly talk" with him....:fairyfight:

I started working at a few restoration shops in central Florida and learned alot (good & bad) about body work. That's what gave me the cahones' to try it myself. If I knew half of what I learned I'd have done it myself the first time
 
B

blandq

Founding Member
Jun 10, 2002
146
0
16
Houston Texas
May 19, 2008
#12
  • May 19, 2008
  • #12
I paid just over $9k; 4 years ago, Sacramento Ca. I tore the car down myself to just rear axle and welded two legs on the cross brace to hold up the front end. (There were no bolts left to unbolt, no glass, no wiring, no interior....nothing. Zero rust on the car, He stripped it, all body work was focused on making it straight, welded up all engine bay stock holes for custom along with front antenna mount. PPG White diamond pearl, 3 step process, color, pearl and clear. Engine compartment same color as the car.

Based on the results, I got a smoking deal with certified PPG warranties to back it up. I'd expect to go 12K or better for that same results today
 

65FBE2

Member
Mar 8, 2007
283
0
17
Minnasnowta
May 19, 2008
#13
  • May 19, 2008
  • #13
Just the cost of the primer, paint, clear coat and under coat material on my car was over $3,000 Labor was a bunch more. A BIG BUNCH
 
N

NewStangOwnr

New Member
Aug 10, 2006
152
0
0
May 19, 2008
#14
  • May 19, 2008
  • #14
I just got a quote from a guy who does restorations for a friend of the family. He quoted 5Gs for stripping it down, some rust repair, priming and painting. Going to get a few more quotes tho.
 

CraigMBA

New Member
Mar 24, 2007
783
1
0
Orange, CA
May 20, 2008
#15
  • May 20, 2008
  • #15
I just bought the paint and materials to paint my car. It was $2500.

I have about 8K in labor so far. I'll be about $12K when I get done. This is a side job that has taken two years to complete. If the shop who did it ran it through the front door, I'd be out at least double.
 
You must log in or register to reply here.

Similar threads

Paint and Body What order to reinstall GT body kit?
  • AnthonyA1234
  • May 1, 2024
  • Fox 5.0 Mustang Tech
Replies
8
Views
1K
Fox 5.0 Mustang Tech May 2, 2024
General karthief
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
749
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
Progress Thread Restoration progress on my 92 GT
  • AnthonyA1234
  • Oct 19, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2025
Mac131
Progress Thread Low Mile 89 GT Restomod - Moving toward paint
  • KRUISR
  • Jan 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
63
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2026
KRUISR
S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
914
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?