Long..Would like some opnions on products for rebuild

Pops Fun · Nov 27, 2009

Hi
I recently blew a hole in a piston and cracked another.. I also toasted the clutch...

What a day!!

Would like so comments about parts I am going to buy.... beside repair the short block ( I am taking it somewhere to be checked out)!!
Suggestions on these or similar parts. Replacing valve covers because I am using stockers with double gaskets and they leak slightly etc. I know I have several clutches on here but can't make up my mind.. My last dyno says 485rwhp and 488 torque.
Don't want to talk price necessarily but decent quality stuff

<table cellpadding="0" cellspacing="5"><tbody><tr></tr><tr><td colspan="9" class="errortxt" align="center">
</td> </tr><tr> <th class="ylwHeader" align="center" valign="middle" width="35"> Qty </th> <th class="ylwHeader" valign="middle" width="40"> Remove </th> <th class="ylwHeader" valign="middle" width="325"> Item </th> <th class="ylwHeader" align="center" valign="middle" width="60">
</th><th class="ylwHeader" align="center" valign="middle" width="60">
</th> </tr> <tr> <td align="center"> <input id="temp_orderItemId_1" value="13323210" type="hidden"> <input size="2" maxlength="2" id="start_quantity_1" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_1" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238056 </td> <td> Gasket Set1962-2001 289/302/351W Engine
</td> </tr> <tr> <td colspan="2"> Part Number # 397-M-6003-A50

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td><td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_2" value="13323211" type="hidden"> <input size="2" maxlength="2" id="start_quantity_2" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_2" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238057 </td> <td> Dual Friction ClutchPressure Plate: 10-1/2"
Disc: 1-1/16" x 10 spline
</td> </tr> <tr> <td colspan="2"> Part Number # 183-DF021057

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_3" value="13323212" type="hidden"> <input size="2" maxlength="2" id="start_quantity_3" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_3" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td>
</td> <td> Centerforce Clutches FLYWHEEL AL FORD 302 351 </td> </tr> <tr> <td colspan="2"> Part Number # 183-900230

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item is expected to ship in 6 days. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_4" value="13323213" type="hidden"> <input size="2" maxlength="2" id="start_quantity_4" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_4" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238058 </td> <td> GT40, GT40P and Cobra Intake </td> </tr> <tr> <td colspan="2"> Part Number # 555-15482

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_5" value="13323214" type="hidden"> <input size="2" maxlength="2" id="start_quantity_5" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_5" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238059 </td> <td> Replacement Gasket Fits Cobra & GT40 Intakes (P/N 129-1506 Spacer)
</td> </tr> <tr> <td colspan="2"> Part Number # 129-15062

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_6" value="13323215" type="hidden"> <input size="2" maxlength="2" id="start_quantity_6" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_6" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238060 </td> <td> Unequal-Length Shorty Headers 1-5/8'' Diameter Tubing
Chrome Finish
</td> </tr> <tr> <td colspan="2"> Part Number # 129-1525

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td> View attachment 238061 View attachment 238062 </td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_7" value="13323216" type="hidden"> <input size="2" maxlength="2" id="start_quantity_7" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_7" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td>
</td> <td> Clutch/Flwheel Kit1994-95 Mustang 5.0L
</td> </tr> <tr> <td colspan="2"> Part Number # 383-186501K1

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td> <script language="Javascript"> function popUp(url) { popupWin=window.open(url,"win",'toolbar=0,location=0,directories=0,status=1,menubar=0,scrollbars=0,width=350,height=200'); self.name = "mainWin"; } </script> View attachment 238063 </td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_8" value="13323217" type="hidden"> <input size="2" maxlength="2" id="start_quantity_8" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_8" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238064 </td> <td> Lightweight Aluminum Flywheel1986-95 Mustang 5.0L
157 Tooth Ring Gear
Includes 28.5 oz. & 50 oz Weights
13.5 lbs.
</td> </tr> <tr> <td colspan="2"> Part Number # 383-186501

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td>
</td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top">
</td> <td align="right" valign="top">
</td> </tr> <tr> <td colspan="5"> <hr align="center" width="100%"> </td> </tr> <tr> <td align="center"> <input id="temp_orderItemId_9" value="13323218" type="hidden"> <input size="2" maxlength="2" id="start_quantity_9" value="1" type="hidden"> <input size="2" maxlength="2" id="temp_quantity_9" value="1"> </td> <td align="center" valign="middle"> Remove </td> <td class="text" valign="top"> <table width="100%"> <tbody><tr> <td> View attachment 238065 </td> <td> Equal-Length Shorty Headers 1-5/8'' Diameter Tubing
Chrome Finish
</td> </tr> <tr> <td colspan="2"> Part Number # 129-1529

</td> </tr> <tr> <td colspan="2"> <table width="100%"> <tbody><tr> <td> View attachment 238066 View attachment 238067 </td> <td align="right" valign="top">
</td> </tr><tr> </tr></tbody></table> </td> </tr> <tr> <td colspan="2"> This item will ship Today. </td> </tr> </tbody></table> </td> <td align="right" valign="top"> $22</td></tr></tbody></table>

Dan95-5.0 · Nov 27, 2009

that ford racing gasket kit is a good one. It took me alot of searching to find out what comes in that kit and its all good stuff that i needed. 9333-pt head gaskets that work great with boost and 1250 intake gaskets. are you running head studs?

revhead347 · Nov 28, 2009

I would send the Centerforce back. That's just a stock replacement clutch. It's not going to be worth a damn if you put any sort of power in the car. I bought one back when I didn't know any better, and it made two passes in the car before it came out the clutch fork hole in a pile of dust. Then I called Centerforce to complain and they said that there clutch was for smoother engagement, not for modified cars, and that the pressure plate was just a factory replacement.

Kurt

Pops Fun · Nov 28, 2009

revhead347 said:
I would send the Centerforce back. That's just a stock replacement clutch. It's not going to be worth a damn if you put any sort of power in the car. I bought one back when I didn't know any better, and it made two passes in the car before it came out the clutch fork hole in a pile of dust. Then I called Centerforce to complain and they said that there clutch was for smoother engagement, not for modified cars, and that the pressure plate was just a factory replacement.

Kurt

Ok What are you using now??

Have rethought clutches and came up with 2 more possibilities..

Anyone have any experience with twin clutches. Haven't been happy with my spec 2+ and CYN-R-G flywheel seems like it slips at the track all the time. Leaning toward the Fidanza...

Thinking about a RST Clutch assembly from McLeod Industries McLeod RST Street Twin Clutches

Product images may differ from actual product appearance.

a softer than stock pedal effort, this assembly drives like the stock clutch.

Fidanza's Twin Disc Clutch Kit

Pedal feel is virtually unchanged and engagement is as smooth as our 3.2 kevlar single disc unit.

Pops Fun · Nov 29, 2009

Dan95-5.0 said:
that ford racing gasket kit is a good one. It took me alot of searching to find out what comes in that kit and its all good stuff that i needed. 9333-pt head gaskets that work great with boost and 1250 intake gaskets. are you running head studs?

Thanks for the info... Yes I am using studs.

revhead347 · Nov 29, 2009

I know a few people here have complained about the quality of Fidanza. I have never used one personally, but apparently they use almost all Chinese components. I use SPEC 4+, and I have been happy with it. I've used a SPEC 3 in the past, and it was also decent. The 4 is the same as the 3, but with a solid hub for quicker engagement. The + is a full faced clutch which gives you a higher torque rating and a smoother engagement, but it cost more. I upgraded to the 4+ when I broke my input shaft and decided to go to a 28 spline input shaft. I am very happy with SPEC customer service. I've have known a few people who have used Mcleod and been happy, but their customer service sucks. Those guys always seem to be out racing when I need a clutch. RAM makes a decent clutch for the money too, but I haven't used one.

You don't need a twin disk clutch, it's total overkill. Couldn't tell you anything about the Fidanza, but I know people who have used the Mcleod, and it binds up.

Kurt

The O.G. · Nov 29, 2009

I have a new centerforce billet steel flywheel for sale if you decide to buy one.Will save you alot of money rather then buying from summit.

Pokageek · Nov 29, 2009

I think mine is center force.. definitely a dual stage and chatters all the time. Gets on my nerves.

Pops Fun · Dec 27, 2009

The O.G. said:
I have a new centerforce billet steel flywheel for sale if you decide to buy one.Will save you alot of money rather then buying from summit.

Ok

Pops Fun · Jan 14, 2010

Anyone here use a zoom clutch... I am looking at a HP48-1s good for 500 to 525 torque??

2002BLGT · Jan 14, 2010

Pops Fun said:
Anyone here use a zoom clutch... I am looking at a HP48-1s good for 500 to 525 torque??

that clutch is so stiff , I had problems with it stretching Zooms own cable , had to readjust it about every 2 weeks , finally gave the clutch away to get a centerforce

BlackVert · Jan 14, 2010

i do not recommend equal length shorties. they are a real pain to work around and they burn plug wires.

Pops Fun · Jan 15, 2010

2002BLGT said:
that clutch is so stiff , I had problems with it stretching Zooms own cable , had to readjust it about every 2 weeks , finally gave the clutch away to get a centerforce

Anyone else... this doesn't sound good

Pops Fun · Jan 15, 2010

BlackVert said:
i do not recommend equal length shorties. they are a real pain to work around and they burn plug wires.

Yes unequal lenght .... is what I will get thanks
edit... any recommendations on headers??

Pops Fun · Jan 15, 2010

Starting to get things together... starting with a dart shp block!!

ProKiller · Jan 15, 2010

awesome. make sure you take plenty of pictures

Long..Would like some opnions on products for rebuild

Pops Fun

Dan95-5.0

Active Member

revhead347

Apparently my ex-husband made that mistake.

Pops Fun

Pops Fun

revhead347

Apparently my ex-husband made that mistake.

The O.G.

Member

Pokageek

Active Member

Pops Fun

Pops Fun

2002BLGT

Well-Known Member

BlackVert

Pops Fun

Pops Fun

Pops Fun

ProKiller

Similar threads

Long..Would like some opnions on products for rebuild

Active Member

Apparently my ex-husband made that mistake.

Apparently my ex-husband made that mistake.

Member

Active Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency