looking for 300 rwhp set up

Explorer intake, gt40 heads, cam of your choice, off road midpipe with 2.5 cat back, cold air intake, pulleys, electric fan, should get you pretty close fairly cheaply.....

Jaym14 said:

Explorer intake, gt40 heads, cam of your choice, off road midpipe with 2.5 cat back, cold air intake, pulleys, electric fan, should get you pretty close fairly cheaply.....

Click to expand...

Pretty close I think, GT40P heads would be better, new valve springs to go with the cam (but 300hp is possible with the stock cam, maybe more work though). Also get the 70mm MAF off of a 94-95 5.0, and try to find an explorer intake that comes with the throttle body (a little work but big savings over aftermarket . . . BTW I have an Exploder TB if you need it PM me). Stock injectors are fine to over 300 hp. 1.7 roller rockers would be good too but again you might need better valve springs for this depending on the cam . . . headers . . . . If you do all of this you should have 300rwhp, almost definitely with a tune (even more perhaps) depending on the condition of your motor, and most of those mods should support more power still w/ power adders or better heads.