Looking for a stud..

Mstng93SSP · Nov 14, 2023

I would imagine with my title, @Noobz347 will be here any minute now, however that is not what I am looking for. I have been searching everywhere for rear wheel studs that are 2 1/2 inches long. I see 3 inch, or stock length. Anyone have or know of 2 1/2 inch rear wheel studs?

Thanks

General karthief · Nov 14, 2023

Looking for a stud..

Thread starterMstng93SSP
Start date8 minutes ago
TagsNone

Well that's what you wrote!
Anyway, you may have to cut down some 3" .
Have you looked at ARP?

Mstng93SSP · Nov 14, 2023

ARP does list a set at $110....that's a little out of my price range....

Noobz347 · Nov 14, 2023

2.3 inches

https://www.oreillyauto.com/detail/c/dorman-autograde/dorman-autograde-1-2-20-inch-thread-wheel-lug/dag0/610523/v/a/18368/automotive-car-2005-ford-mustang?q=wheel+stud+2.5+inch&pos=9

...and I found you this:

He says he's the full 2.5.

Mstng93SSP · Nov 14, 2023

Sorry, should have clarified. Looking for rear which is a 0.625 knurl. The dude you posted @Noobz347 has too small of a knurl.

Noobz347 · Nov 14, 2023

Mstng93SSP said:
Sorry, should have clarified. Looking for rear which is a 0.625 knurl. The dude you posted @Noobz347 has too small of a knurl.

Check the Oreily's website. They have a lot of oddballs. You might find something very close.

Mustang5L5 · Nov 15, 2023

So you're looking for a 2.5" long stud eh??

Mstng93SSP · Nov 15, 2023

Mustang5L5 said:
So you're looking for a 2.5" long stud eh??

Aren't we all.....

AeroCoupe · Nov 15, 2023

Give Moser a call and see if they have 2.5" and just are not advertising them. They have the 3" for a really good price so they might just have the 2.5"

Moser 1/2" - 20 x 1 1/2" 6.25" knurl, Press-In Stock Ford Stud

Launch with confidence. Moser Engineering's high-strength press-in Ford wheel studs are the trusted choice for racers and performance builds. Upgrade your axle today.

www.moserengineering.com

Mstng93SSP · Nov 16, 2023

Moser said they only have a 3 inch.

Noobz347 · Nov 16, 2023

Damn...

All I've got for ya is some motivational music to help your search:

Nevermind the video part. It came with the song

nickyb · Nov 16, 2023

I used a dremel with cut off disc,trimmed em down and shaped em round tips.
did this so i could get center caps on.

85GTStangGuy · Nov 17, 2023

Noobz347 said:

Damn it!
It ended at the best part.
What happens next??

General karthief · Nov 17, 2023

85GTStangGuy said:
Damn it!
It ended at the best part.
What happens next??

Everybody dies!!!

Noobz347 · Nov 17, 2023

General karthief said:
Everybody dies!!!

Covid

TOOLOW91 · Nov 17, 2023

Mstng93SSP said:
ARP does list a set at $110....that's a little out of my price range....

That’s really not bad for good wheel studs . That’s what I have on mine they fit under the center caps of my 17 inch pony’s

Mstng93SSP · Nov 17, 2023

TOOLOW91 said:
That’s really not bad for good wheel studs . That’s what I have on mine they fit under the center caps of my 17 inch pony’s

I have seen your car...it deserves $110 wheel studs. Mine.....not so much.

TOOLOW91 · Nov 17, 2023

Mstng93SSP said:
I have seen your car...it deserves $110 wheel studs. Mine.....not so much.

I mean your cars are pretty damn sweet dude !

Mstng93SSP · Nov 17, 2023

Thanks.

Looking for a stud..

You have a nice rear end there Dave.

wonder how much it would cost to ship you a pair