Looking for shop to implant new engine.

98FaudGT · Sep 8, 2004

I am looking for a someone that knows or is involved with a shop in the Georgia/Florida area that can get me to where I want to be. I am looking to build a possible 351 or 302 (302 blown) implant into my 98 GT that can get me around 350 - 450 hp. Or possibly a used PI 4.6 , low mileage blown. PM me.

98FaudGT · Sep 8, 2004

98FaudGT · Sep 8, 2004

bump...Help

ChrisWorrell · Sep 8, 2004

Well if you want a built 4.6 2v, no doubt you should talk to Modular Powerhouse which is about 30 minutes north of Atlanta. You will not find a better shop with better customer service or a better end result in your car.

98FaudGT · Sep 8, 2004

Great thanks for the info bro. Do you have a number or a website or somewhere I can contact them? Also, I have a question because I am just looking at ideas right now, since I have a decent amount of money to play with here. I am kind of in the blind at what the 98 block can handle power wise, esp with boost. Now if one were to forge everything, beams, rods, etc. and get PI heads with new cams, springs, etc. just how much power could it the rest of the block handle? I know I probably won't make enough power anyways but just a question. Also to forge everything, new heads, cams and all and a turbo/supercharger, I have and idea but maybe someone could give me their ideas at power and cost. Thanks. Again just tryin to get ideas here.

98FaudGT · Sep 8, 2004

Awesome! Nice numbers as well. What all you have done?

white99gt · Sep 8, 2004

98FaudGT said:
Awesome! Nice numbers as well. What all you have done?

LOl to much to list..Just follow the mod link in my sig .It will tell you everything i have ...

white99gt · Sep 8, 2004

98FaudGT said:
Great thanks for the info bro. Do you have a number or a website or somewhere I can contact them? Also, I have a question because I am just looking at ideas right now, since I have a decent amount of money to play with here. I am kind of in the blind at what the 98 block can handle power wise, esp with boost. Now if one were to forge everything, beams, rods, etc. and get PI heads with new cams, springs, etc. just how much power could it the rest of the block handle? I know I probably won't make enough power anyways but just a question. Also to forge everything, new heads, cams and all and a turbo/supercharger, I have and idea but maybe someone could give me their ideas at power and cost. Thanks. Again just tryin to get ideas here.

Their site:
http://www.modularpowerhouse.com/

Our blcoks themselves can handle more than the average guy can throw at it..But the internals are not up to the task of holding power..SOme good internals and a power adder and you can make some nice numbers with a little 2v ..

Looking for shop to implant new engine.

98FaudGT

New Member

98FaudGT

New Member

98FaudGT

New Member

ChrisWorrell

Member

98FaudGT

New Member

98FaudGT

New Member

white99gt

white99gt

Similar threads

Looking for shop to implant new engine.

New Member

New Member

New Member

Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency