• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Loose Steering Column/Shaft

  • Thread starter Thread starter boostfrk
  • Start date Start date Dec 15, 2011

boostfrk

10 Year Member
Aug 30, 2011
712
69
59
Colorado
Dec 15, 2011
#1
  • Dec 15, 2011
  • #1
I'm in the process of rebuilding my entire steering system on my '90 LX 5.0, and while I was at it I'm trying to get rid of some up and down play I have in the steering wheel.

I've read the threads about tightening the bolts that hold the column to the dash and the bolts behind the multi-function switch that often work their way loose. Neither of those helped.

After removing the steering wheel I've narrowed it down to the very end of the steering column where it travels through the tilt mechanism. You can grab ahold of the end (first picture) and wiggle it ever so slightly up and down. With the steering wheel attached this movement is exaggerated as the wheel increases the moment on this shaft.

The second picture shows a side view of the column. You can see a small brass colored ring at the back of the tilt mechanism. It's almost like if you could use a spanner wrench to tighten this ring against the tilt mechanism (towards the rear seat of the car) it would eliminate this wobble.

Anyone ever run into this before and have a solution? I'd really like to get rid of this wobble before I put everything back together. Nothing like having that tight steering feel back.



 

2vNotch

Active Member
Dec 6, 2011
519
21
29
Rogers, AR
Dec 16, 2011
#2
  • Dec 16, 2011
  • #2
Mines the same way...havnt checked it out yet tho
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Dec 16, 2011
#3
  • Dec 16, 2011
  • #3
boostfrk said:
I'm in the process of rebuilding my entire steering system on my '90 LX 5.0, and while I was at it I'm trying to get rid of some up and down play I have in the steering wheel.

I've read the threads about tightening the bolts that hold the column to the dash and the bolts behind the multi-function switch that often work their way loose. Neither of those helped.

After removing the steering wheel I've narrowed it down to the very end of the steering column where it travels through the tilt mechanism. You can grab ahold of the end (first picture) and wiggle it ever so slightly up and down. With the steering wheel attached this movement is exaggerated as the wheel increases the moment on this shaft.

The second picture shows a side view of the column. You can see a small brass colored ring at the back of the tilt mechanism. It's almost like if you could use a spanner wrench to tighten this ring against the tilt mechanism (towards the rear seat of the car) it would eliminate this wobble.

Anyone ever run into this before and have a solution? I'd really like to get rid of this wobble before I put everything back together. Nothing like having that tight steering feel back.



Click to expand...
I just dealt w/ mine last month. That assy is not user servicable. I thought that my slop was in that tilt head that you have pictured, So I opened mine up to see if there was a bearing in there that was loose. Very complicated, and not for the faint of heart. You have to drill out those pivot pins (which there is no replacement for) and that will let the entire steering shaft come out w/ the head. You will also be able to remove the tilt head from the shaft.

While it can be taken apart, what you have to do to put it back together is the "not for the faint of heart" part. I won't go into all the details, but lets just say that it won't be good as new when you're done.

As for mine?....Tight, w/ absolutely no slop. That said, I wouldn't recommend that you do what I did, but you can look for yourself: http://www.stangnet.com/mustang-forums/threads/steering-column-rebuild.847785/

Sorry, forgot I resolved my issues on another thread:
http://www.stangnet.com/mustang-forums/threads/tonights-new-issue.847679/
 

boostfrk

10 Year Member
Aug 30, 2011
712
69
59
Colorado
Dec 16, 2011
#4
  • Dec 16, 2011
  • #4
madmike1157 said:
I just dealt w/ mine last month. That assy is not user servicable. I thought that my slop was in that tilt head that you have pictured, So I opened mine up to see if there was a bearing in there that was loose. Very complicated, and not for the faint of heart. You have to drill out those pivot pins (which there is no replacement for) and that will let the entire steering shaft come out w/ the head. You will also be able to remove the tilt head from the shaft.

While it can be taken apart, what you have to do to put it back together is the "not for the faint of heart" part. I won't go into all the details, but lets just say that it won't be good as new when you're done.

As for mine?....Tight, w/ absolutely no slop. That said, I wouldn't recommend that you do what I did, but you can look for yourself: http://www.stangnet.com/mustang-forums/threads/steering-column-rebuild.847785/

Sorry, forgot I resolved my issues on another thread:
http://www.stangnet.com/mustang-forums/threads/tonights-new-issue.847679/[/quote]
Click to expand...
Madmike...sounds like a lot but I might try it.

That being said, I may try finding a column from someone else first that's in better shape. Are the non-tilt columns less likely to have this issue than tilt columns?
 
You must log in or register to reply here.

Similar threads

Suspension 87 steering wheel slightly wobbles after new Rag joint install
  • R82148V
  • Jun 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jun 24, 2025
R82148V
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
859
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Tilt Steering Column Help
  • Zeffer
  • Jun 13, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2022
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?