Lopey cam idle

[King Cobra 22]

I am most likely going to get the Trickflow H/C/I kit and I was just wondering how the trickflow stage 1 cam will sound at idle.I'm hoping it will be a nice lopey cam. How big of a difference will it sound at idle in terms of sound(louder) and being lopey?
I know a few mustangs with H/C/I and when you sit at idle you can definetly hear the cam loping and it is very noticeable that the car has a cam in it.
I was wondering if that would be the same way with the TFS 1 cam.
Would it be noticeable that my cam is not stock if you were to hear it at idle or it is just a little bit more then stock.

Also feel free to comment on your cam and how it sounds.

 

[CManT1914]

The stage 1 cam has some killer lope, even at 900 rpm. www.donjohnii.com has a ton of exhaust clips from different combos, you might be able to find one with a stage 1 cam. Unfortunately, I haven't gotten a new clip with my cam yet.

 

[final5-0]

Hey King

Until you get your kit .........................................

Just pull the plug on your isc .....................

Lope City Baby ... on the cheap

Grady

 

[CManT1914]

Hey King

Until you get your kit .........................................

Just pull the plug on your isc .....................

Lope City Baby ... on the cheap

Grady

ROFLMAO! Or just unplug the maf.

 

[Green 94 5.0]

http://roger.tiora.net/BS/stang/stangidle.mpg

that is a tfs stage 1 cam.....plenty of lope and believe it or not, the car still holds a solid idle.

 

[4Jenna]

Damn sounds great! Thats the cam I'm putting in my notch..sweet!

 

[Green 94 5.0]

ill be yanking mine out of the block soon.....if you are interested, ill sell it to you cheap.

 

[Eric94GTvert]

The stage 1 will NOT be mistaken for a stock cam for sure. It sounds pretty good to me imo. Mine idles well without tuning and seems to be performing well. The car will be noticeably louder with the H/C/I on the car.

 

[4Jenna]

ill be yanking mine out of the block soon.....if you are interested, ill sell it to you cheap.

Wish i woulda known...got one already

 

[green95gt]

I got my H/C/I done two weeks ago, went with the stage 1 trickflow cam and absolutly love it. Like someone said, it still sounds great even with the idle turned up to 900 (which I hope I can turn back down once it's tuned) buy it and use it, you won't regret it.

 

[4Jenna]

http://media.putfile.com/Eades-Idle

muwahahaha

 

[final5-0]

Damn sounds great! Thats the cam I'm putting in my notch..sweet!

Tell ya what Chris!

You get all your plug wires good and tight ............

That idle will smooth right out for you

Sounds Nasty

Grady

 

[4Jenna]

lmao

 

[fiveo'cobra]

I've heard a TFS stage 1 in person and it sounds a bit rougher than my E cam. It really does sound nice. His was even turned up to 900rpm and my E cam is at 800.