lower

you can lower it a little more with the steeda x2 ball joint in the front & if you look around a little, you can find some adjustable lca's that can lower the rear a little as well. hope it helps

the real issue just becomes your spring has X amount of travel. if you remove all of that you just dont have suspention. if you don't have suspention you can not aborb anything in a corner. going more than 2" in a spring is not good. 2" drop is really too much in a spring but you can get away with it if you don't mind sacrificing a bit of handling. the right way would be like 2" spindle (I don't know of any company that makes one but have never looked) then 1 inch spring. Coilovers are a good way to adust your ride hieght but there are expesive and I am not sure that you can drop 3-4" with those. seems like you would just not have any sprink left they would be compressed so far. if you really don't car about handling you can just cut the springs. most places would then have a hard time alining your car. I am not sure if CC plates would alow for proper alinment at that drop. someone else might know.