Mac Ceramic Longtubes Quality

helty · Jun 5, 2006

Anyone know if Mac has fixed their supposed quality issues? Anyone have the new ceramic coated LT's? Install problems? Any problems?

Ive read plenty of negative feedback about Mac quality and the oil consumption issue with 4V's, but how much of it is internet heresay from people just regurgitating what they read on forums? Can some people that actually have Macs chime in?

Their ceramic LTs are $100 cheaper than BBKs and dont have that stupid crimp in the drivers side headers for the steering rack. Speaking of their new ceramic coating, does it acutally hold up or does it flake like that HTS crap?

Thanks bishes :SNSign:

DSG40thGT · Jun 5, 2006

Stang|ess · Jun 5, 2006

Noob gave you the cold shoulder

I'd stick with what's proven. Ask your pimp, jason, for some money and buy Bassani, or Hookers. Don't have to remove the passenger side to do tranny work

tomustang · Jun 5, 2006

Mac & Quality in the same sentence?

tomustang · Jun 5, 2006

Stang|ess said:
Noob gave you the cold shoulder

I'd stick with what's proven. Ask your pimp, jason, for some money and buy Bassani, or Hookers. Don't have to remove the passenger side to do tranny work

read his rpm sig

DSG40thGT · Jun 5, 2006

haha, I love this site

Stang|ess · Jun 5, 2006

tomustang said:
read his rpm sig

02 GT~FRPP 4.10s~Bassani C/B + SLP O/R X~MGW STS~Accufab 75mm TB/Plenum~SCT XCal2~Maximum Motorsports LCAs

First 99-04 GT whored out on RPMPlanets

You got a funny 1/4 mile time

So it is true. You are a whore!

psst, how much for a cleveland steamer?

helty · Jun 5, 2006

Stang|ess said:
02 GT~FRPP 4.10s~Bassani C/B + SLP O/R X~MGW STS~Accufab 75mm TB/Plenum~SCT XCal2~Maximum Motorsports LCAs

First 99-04 GT whored out on RPMPlanets

You got a funny 1/4 mile time

So it is true. You are a whore!

psst, how much for a cleveland steamer?

he wasnt talking about my sig douche. As far as the steamer, the cost varies. Would you like corn with that?

Skud · Jun 5, 2006

I picked up a set when they were on sale here during easter. They seem to be of good quality, but I haven't used them yet. They're sitting on my bedroom floor..

And corn please..

Riley

csledd · Jun 5, 2006

there were issues with 4v.. I have seen threads started by people who did have problems with the wedling quality in the LTs. But for the 2v's there are PLENTY of people who are using their LT's with no problems. I'd still take SLP over em though but that's just personal preference

helty · Jun 5, 2006

csledd said:
there were issues with 4v.. I have seen threads started by people who did have problems with the wedling quality in the LTs. But for the 2v's there are PLENTY of people who are using their LT's with no problems. I'd still take SLP over em though but that's just personal preference

yeah, Im still keeping SLP open as an option. I already have their mid-pipe, I just hate how low the cats hang.

You're lowered right? Any problems scraping the headers?

Blinkstang · Jun 5, 2006

I use to have MAC LT's, non ceramics. And well, now lets just say I have BBK's and couldnt be happier, haha. The MAC's were junk, had leaks, ticking, idle was off - just wasnt happy with them. Some people have good luck with them, others dont. I then had BBK's put in, installed by the same person, and all the above problems went away. And I dont have the ceramic BBk's either, I have the chrome. No problems thus far, still look new.

And I am lowered 1.6 up front. Havent scraped yet in Chicago, just have to be a little more cautious.

navarro98gt · Jun 5, 2006

Unfortunately my ceramic coated Hooker headers started rusting within a year.

01Steeda · Jun 5, 2006

I have non ceramic Mac's.. couldnt be happier. no problems what so ever. it is alot of internet bs

DSG40thGT · Jun 5, 2006

Blinkstang said:
I use to have MAC LT's, non ceramics. And well, now lets just say I have BBK's and couldnt be happier, haha. The MAC's were junk, had leaks, ticking, idle was off - just wasnt happy with them. Some people have good luck with them, others dont. I then had BBK's put in, installed by the same person, and all the above problems went away. And I dont have the ceramic BBk's either, I have the chrome. No problems thus far, still look new.

And I am lowered 1.6 up front. Havent scraped yet in Chicago, just have to be a little more cautious.

Alright helty, BBK Longtubes for the win!

helty · Jun 5, 2006

DSG40thGT said:
Alright helty, BBK Longtubes for the win!

but they have that stupid crimp in 2 of the drivers side pipes

DSG40thGT · Jun 5, 2006

helty said:
but they have that stupid crimp in 2 of the drivers side pipes

I guess we'll have to custom fit an H onto some SLP Longtubes.

helty · Jun 5, 2006

DSG40thGT said:
I guess we'll have to custom fit an H onto some SLP Longtubes.

Or I could just trade up to a Mach or Kewbra and say F'k it

DSG40thGT · Jun 5, 2006

helty said:
Or I could just trade up to a Mach or Kewbra and say F'k it

Azure Blue Mach baby, you know what my answer is.

DSG40thGT · Jun 5, 2006

SLP Longtubes for a Mach is like $850, lol

Mac Ceramic Longtubes Quality

some Ukrainian's enjoying a handjob via my credit

New Member

seeking cyber partner(s)

Psychotic Member

Psychotic Member

New Member

seeking cyber partner(s)

some Ukrainian's enjoying a handjob via my credit

Member

Official Ovary Punching Member

some Ukrainian's enjoying a handjob via my credit

Member

Member

New Member

New Member

some Ukrainian's enjoying a handjob via my credit

New Member

some Ukrainian's enjoying a handjob via my credit

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency