• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Made it to the drag strip for the first time this year.

  • Thread starter Thread starter Wi Stang
  • Start date Start date Jun 25, 2007

Wi Stang

Member
Jun 27, 2004
248
0
16
Fountain City, WI
Jun 25, 2007
#1
  • Jun 25, 2007
  • #1
We decided to head to the drag strip this weekend. Drove for 3.5 hours to Tri-state Raceway in Earlville, Iowa. There weren't too many cars there, but it was a good time.
I just got some new street wheels and tires for the car, so I figured I would just run those, and not put my other MT ET streets on. They are chrome 03 Cobra wheels 17X9 fronts with 255/45/17 nitto 555, and 17X10.5 in the back with 315/35/17 555R's.
I had a hard time figuring out how to launch. There was a fine line between bogging it, and blowing them off. I got pretty consistant with launching at 3200 rpm off the 2 step.
In practice I ran

11.805 @ 125.82
11.797 @ 119.76
11.799 @ 118.12

Not too sure why the MPH was off on the last 2 runs. At half track on all 3 runs the MPH was about the same around 96.5. So that kind of has me baffled

Then time trials started. In the first round I got the #1 qualifier position with a .004 reaction time. (all luck on that one.)

I made it all the way to the finals where I raced a Super Bee. He had a 10.20 dial in, and I had an 11.79. Well I ran an 11.790 @ 125.30 and took the win in the Domestic class.

I broke out in the last race between the tuner and the domestic class. I had an 11.79 dial in, and ran an 11.68. Oh well, it was my quickest pass of the day, here is a rundown of the slip.

60' -- 2.017
330 -- 5.167
1/8 -- 7.712
MPH -- 96.91
1000 -- 9.884
1/4 -- 11.688
MPH -- 124.75

Next time out I will have to slap on my Et Streets, and see if I can get my 60' times down. The best I could muster on the Nittos was a 1.977.

My friends I went up with did not have as good of a day. They were just doing partial runs to dial in the 60' times, and the tranny on the car blew after about the 3rd run.
I didn't get any time to take pictures while I was there. Only 1 with a partial of my friends car.
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Jun 25, 2007
#2
  • Jun 25, 2007
  • #2
That's not bad at all.
You're right where I want to get which is around the 11.50sec area.
Any quicker and you need at least a roll bar and 5pt harness and I don't want to do those mods to my DD.
 

Stanger007

Founding Member
Sep 26, 2001
2,015
2
46
Baton Rouge, LA
Jun 25, 2007
#3
  • Jun 25, 2007
  • #3
Nice times - if you want to mail me some of that horsepower you have, I guarantee you that you won't have to worry quite as much about blowing the tires off.

Wes
 

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Jun 25, 2007
#4
  • Jun 25, 2007
  • #4
Not bad man! With that kinda mph (124-125ish) and with a good 60', you should be in the 10.80's-10.90's! Thats flyin!
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Jun 25, 2007
#5
  • Jun 25, 2007
  • #5
Very nice.... nice times, nice car, and nice brackets!
 

69clark

Founding Member
Sep 25, 2002
731
7
18
Ravena, NY
Jun 25, 2007
#6
  • Jun 25, 2007
  • #6
Wait a minute, your friend has the Pace Car. Not to hi-jack, but I want more info on that car. PM me pics if you like.

BTW, looks like some great times. I actually went to the track this weekend as well to dial in my tune. My last run of the day when I was already pretty happy with my tune, I couldn't run it too hard, because guess what, I need a new tranny now. Looks like you had more fun than me.
 

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Jun 25, 2007
#7
  • Jun 25, 2007
  • #7
69clark said:
Wait a minute, your friend has the Pace Car. Not to hi-jack, but I want more info on that car. PM me pics if you like.

BTW, looks like some great times. I actually went to the track this weekend as well to dial in my tune. My last run of the day when I was already pretty happy with my tune, I couldn't run it too hard, because guess what, I need a new tranny now. Looks like you had more fun than me.
Click to expand...

So do we have to blow up our trannys now to stay a part of this forum? On a side note, what kinda times were you running Tom?
 

Wi Stang

Member
Jun 27, 2004
248
0
16
Fountain City, WI
Jun 25, 2007
#8
  • Jun 25, 2007
  • #8
Thanks guys, it was a lot of fun. I need to get out a lot more than I do.

Originally Posted by 69clark
Wait a minute, your friend has the Pace Car. Not to hi-jack, but I want more info on that car. PM me pics if you like
Click to expand...

Don't worry about any hi-jacking. His car is way cool. I am not even too sure how long he has had it. Probably about 10 years or so.
It was a feature car in 5.0 Mustang. I think it was like the July issue in 05. I'll have to look to see if that is correct or not.
It is pretty much just a drag car, but it is still street legal, and he does take it out here and there. The motor was just redone this year. It is an 302R block that is stroked out to a 363. AFR 205 heads. C4 tranny (well it was till it blew) It is a real nice looking car.
He runs various shots of Nitrous on it. Last month at WFC X he had his best run to date. I think it was in the semi finals that he ran a 9.18 @ 150. One of these days he is going to go 8's with it.

Here is a picture with the old wheels. He got some new Mickey Thompson wheels this year.


Here is a picture of him from WFC X that I found on 1320video.com As you can see it is pretty fun to watch him run.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 25, 2007
#9
  • Jun 25, 2007
  • #9
The coolest thing about your story is that you drove your 11 sec car to and from the track. I hope you drove it anyways I did notice a couple car haulers in the picture there. Nice times BTW.
 

Wi Stang

Member
Jun 27, 2004
248
0
16
Fountain City, WI
Jun 25, 2007
#10
  • Jun 25, 2007
  • #10
Usually I do drive to the track, but this time I actually trailered it down just because it was so far away.
The track I usually go to is just a little over an hour away, and this one was 3.5 hours.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 25, 2007
#11
  • Jun 25, 2007
  • #11
I guess thats ok. I drove mine to a track about 4 hrs away. However I twisted the driverside axle out of it and had to trailer it home. I hope my next trip doesn't end up like that.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Jun 25, 2007
#12
  • Jun 25, 2007
  • #12
Great times, that has 10's all over it
 
You must log in or register to reply here.

Similar threads

S
it has been a while
  • stick shift
  • Aug 28, 2018
  • The Welcome Wagon
Replies
1
Views
730
The Welcome Wagon Aug 28, 2018
General karthief
C
First generation info for street driven 65 - 67 Mustangs.
  • Charlie Cheap
  • Nov 15, 2018
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
8
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Nov 18, 2018
rbohm
J
1/4 Help Please
  • jon94vert
  • Sep 21, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2016
mikestang63
Excellent Hagerty Article About The "kings Of The Street"
  • FoxMustangLvr
  • Sep 21, 2017
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 21, 2017
NIKwoaC
R
Engine 1992 Mustang Hesitation/Cutting-Out
  • RTW0223
  • May 2, 2018
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
14K
Fox 5.0 Mustang Tech May 26, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?