• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

MAF Meter electronics replacement....

  • Thread starter Thread starter 93 LX
  • Start date Start date Aug 9, 2008
  • 1
  • 2
Next
1 of 2 Next Last

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 9, 2008
#1
  • Aug 9, 2008
  • #1
I just picked up a MAF meter from the bone yard that has a 6 pin MAF electronics package. I want to install this on my 93but my 93 has a 4 pin MAF electronic unit. The torx screws has a pin in the middle so I cant use my regular drivers. What kindof driver do I need to remove this.

Also the MAF is from a Mod Motor T-bird that used a rubber host to attach it to the air box so no flanges to remove and the output side (MAF to TB) is the same size as the hose on my 93 Stang.

The part numbr on the MAF electronics is F6SF-12B579-AA and AFH70-02C and 6J26.

Any idea on the specs of this maf?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Aug 9, 2008
#2
  • Aug 9, 2008
  • #2
I don't beleive they are interchangable.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 9, 2008
#3
  • Aug 9, 2008
  • #3
Tamperproof or security torx bits are what you need to remove the fasteners.

If the housing you got happens to be a 70 MM unit and the tube in which the two MAF wires sit is the same exact size as a 94-95 Mustang 70 MM housing, you might be able to use a 94-95 Mustang sensor in the Mod motor housing.

If the housings are not identical (other than the flange), then stick with a 94-95 housing and sensor (a married pair) and work around the flange.

And FWIW, the later MAFs had IAT functions in them, hence the extra wires. It's easy to rework the wiring connector to use a 6 pin in a 4 pin application however.

Good luck.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 9, 2008
#4
  • Aug 9, 2008
  • #4
Some Images of the MAF

Here are sone pics..more to follow
 

Attachments

  • img038.webp
    29.6 KB · Views: 226
  • img039.webp
    27.8 KB · Views: 200

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 9, 2008
#5
  • Aug 9, 2008
  • #5
pics 2....

here are some more.... MAF connector and pigtail. Colors are red, black with white line, grey with pink line and blue with red line..
 

Attachments

  • img043.webp
    27.1 KB · Views: 190
  • img042.webp
    26.4 KB · Views: 183

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 9, 2008
#6
  • Aug 9, 2008
  • #6
More Pics 3

MAF electronics connector.
 

Attachments

  • img041.webp
    20.6 KB · Views: 209
  • img040.webp
    30.5 KB · Views: 188

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 10, 2008
#7
  • Aug 10, 2008
  • #7
anyone?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 10, 2008
#8
  • Aug 10, 2008
  • #8
Pics don't help us much.

If you have the year of T-bird, check the wiring schematic to see what wires do what. If Ford was universal, the conversions guys use for Lightning MAF's might be helpful.

And again, if the housing is the same as a 94-95 Mustang MAF, you could try and swap a 94-95 MAS into that housing. You'd have your easy plumbing connections with a more-correct air-flow transfer curve.
 
S

seijirou

Founding Member
Aug 15, 2002
2,417
4
48
DFW
Aug 10, 2008
#9
  • Aug 10, 2008
  • #9
That part number is 1996, so you can use a wiring diagram for that year of whatever car you pulled it out of.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 10, 2008
#10
  • Aug 10, 2008
  • #10
The only other MAF that is a one for one swap for a 93 and earlier 5.0 Mustang is the 94-95 Mustang MAF.

The MAF body and sensor are designed to match each other. Therefore you can't swap sensors between different part number MAF bodies and maintain proper calibration. The assembly is designed to match the computer’s internal program, and swapping a different MAF can upset the computer's calibration. In other words, your monster MAF probably won't match the calibration of your 5.0 Mustang computer.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 10, 2008
#11
  • Aug 10, 2008
  • #11
OK here is what i did. Since everything aligned i used my 93 MAS in the 96 Meter and bang o the machine fired up and runs good. with this MAF I can spin the tires in 2nd from a roll and there seems to be more mid range torque than before. I just ran a 96 Cobra which i have ran before and still got beat but it was much closer than before and my 93 didnt fall on its face in 3rd as it has done in the past. I will try the MAS that came with the Meter after making an adaptor, dont want to cut up the stock wiring unless it works.

Verdict: By the Seat-o-pants meter this is a thumbs up mod.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 11, 2008
#12
  • Aug 11, 2008
  • #12


Please do not attempt this at home folks
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 11, 2008
#13
  • Aug 11, 2008
  • #13
vristang said:


Please do not attempt this at home folks
Click to expand...

And why not? larger MAF meter no modification to MAF meter or rubber hoses, uses stock mounting and if you use the stock MAS no wire modifcation. The car runs great, better throttle response and more mid range power....

i wish i could give you the part number of the meter but I could not find one n the meter at all. I'll find another and give you the car specs. What I do know is it was a T-bird with a mod motor so i guess you may have to just accept that this worked. BTW both Sensors looked identical, same length of the probes and element location as well as the same bolt pattern.

Allen
 

montegoman351

Member
Jan 12, 2007
169
1
18
Aug 11, 2008
#14
  • Aug 11, 2008
  • #14
vristang said:


Please do not attempt this at home folks
Click to expand...

(kidding vristang)

Well...you really don't know what will happen long term with this "mod"...you could be running the engine too rich...or even worse...too lean... This "mod" could cause long term effects to the engine...the ONLY way to know how it's running, is to have a wide band O2 sensor setup. The 55mm mass air has a FAR different mass air transfer than a 70mm, this is one sensor that should NEVER be messed with, if you do not know how lean/rich it's running...or atleast have a chip with the proper MAF transfer chart loaded on it, as a safety net...

Sorry to pee on your Wheaties like that...
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 11, 2008
#15
  • Aug 11, 2008
  • #15
stock motor with 201000 on the clock. Like I am going to invest in a wide band O2 sensor setup. LOL thanks but i will replace the MAS with the one that came with the meter or even pull one from a 94-95 stang.... but for now it works just fine...
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 11, 2008
#16
  • Aug 11, 2008
  • #16
found this on ebay and this is what i got..

http://cgi.ebay.com/ebaymotors/70mm...822QQitemZ220266695822QQtimeoutZ1218505181001
 
1

1990MustangLX50

Member
Jul 11, 2007
89
0
7
Aug 11, 2008
#17
  • Aug 11, 2008
  • #17
If he is using his stock mass air meter then as long as it is in the air stream then the computer will compensate for the increased air flow I have to disagree with people saying its a bad idea, It shouldnt matter what housing the meter is in as long as the meter is in an area it can measure the air flow so i give it
 
S

seijirou

Founding Member
Aug 15, 2002
2,417
4
48
DFW
Aug 11, 2008
#18
  • Aug 11, 2008
  • #18
montegoman351 said:
(kidding vristang)

Well...you really don't know what will happen long term with this "mod"...you could be running the engine too rich...or even worse...too lean... This "mod" could cause long term effects to the engine...the ONLY way to know how it's running, is to have a wide band O2 sensor setup. The 55mm mass air has a FAR different mass air transfer than a 70mm, this is one sensor that should NEVER be messed with, if you do not know how lean/rich it's running...or atleast have a chip with the proper MAF transfer chart loaded on it, as a safety net...

Sorry to pee on your Wheaties like that...
Click to expand...


It's really not that complicated. If the MAF meter is the only thing that's changed, the engine is still moving the same mass of air at the same rpm, load, and throttle position.
If this MAF meter setup is putting out the same voltage signals as the original one was, then the proportion of metered vs unmetered air through the housing is the same, and thus there will be no difference to the A/F ratio. You don't need the expensive gear you mentioned in order to check, all you need is an inexpensive multimeter.

That being said;

93LX it would be prudent of you to take some comparison readings between your two MAF meter setups. Test between pins C and D, and read what your voltage is at idle, 20, 40, and 60 mph. I would also test to see what your max voltage is at WOT. Do this for both setups. The higher the voltage, the richer you're running. Max possible voltage should be ~ 5 volts.

Comparing the results will let you know if you're going richer, leaner, or staying the same with your new configuration.
 

Lemonade

Founding Member
Mar 4, 2000
827
0
16
San Ramon,CA
Aug 11, 2008
#19
  • Aug 11, 2008
  • #19
93 LX said:
What kindof driver do I need to remove this.
Click to expand...


This is what you are looking for:
Powerbuilt Tools Bit & Star Set: 10 Piece
Part Number: 646501

$8.00 @ Kragen

Lems
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 11, 2008
#20
  • Aug 11, 2008
  • #20
93 LX said:
found this on ebay and this is what i got..

http://cgi.ebay.com/ebaymotors/70mm-MASS-AIR-METER-MAF-87-95-FORD-MUSTANG-19LB-CAL_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1011Q7c39Q3a1Q7c66Q3a4Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem220266695822QQitemZ220266695822QQtimeoutZ1218505181001
Click to expand...
LMAO @ you for using ebay as a tech source



Sadly, I don't have the patience to run through the full explanation of how the sensor interacts with the housing.
If no one else wants to explain here, then you guys will have to do a search.

The ecu can only compensate +/- 12.5% on the Fox cars.
If your hoky MAF setup puts you outside that range, then the AFR stays there.

If your hoky MAF setup falls with in that range, then you have gained NOTHING as the ecu will push the AFR back to stoich anyway.

No gain with mismatching MAF housings & sensors... only risk...
The 94/95 MAF swap is a KNOWN alternative, and the results have been well documented by more than some 'seat-o-pants' meter lol
jason
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

87 Maf Conversion
  • NCsProdigy 87GT
  • Apr 3, 2016
  • Fox 5.0 Mustang Tech
Replies
2
Views
705
Fox 5.0 Mustang Tech Apr 3, 2016
mikestang63
Need Help, Car Wont Start, I've Gone Through Both Checklists
  • 93silverlx50
  • Jul 22, 2017
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
13K
Fox 5.0 Mustang Tech Apr 30, 2019
General karthief
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
Maf Question
  • RUNINAGT
  • Sep 21, 2012
  • Fox 5.0 Mustang Tech
Replies
3
Views
612
Fox 5.0 Mustang Tech Sep 22, 2012
jrichker
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?