Maf question.

Hey guys. Its been awhile! My car is finally at a shop, second street speed in perkasie (www.secondstreetspeed.com) to get dyno tuned! He ran into a problem tho in which my maf is getting pegged at 4k rpm's and that its not working very well. He was saying something about it should be around .8 volts or somethign at idle and it was really at 1.5 or something. I dont remember exactly.. Anyway, What maf would you guys suggest? I was looking at the 80mm Pro-M's but they have a filter right attached to them, and I have my air temp sensor BEFORE my maf so that wont work right. I need somethign that I can attach a hose to on each end. I saw the 75mm bullet maf's but some have said that they arent as good as the regular ones. Does anyone here run a 75mm pro-m and can give me some feed back? Thanks again!

I just thought about it. Where do you guys put the air temp sensor in a car that runs an 80mm maf? There isnt a spot in the intake tubing for it, and I dont see an provisions on the maf it self. Thanks again.

I guess I could drill and tap my piping after the s/c for the sensor, in which case I could use the regular 80mm maf... Ill have to talk to my tuner to see what he thinks on monday.