• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Main bearing problems??

  • Thread starter Thread starter 92notch6886
  • Start date Start date Aug 17, 2008
9

92notch6886

New Member
Nov 15, 2006
15
0
0
Aug 17, 2008
#1
  • Aug 17, 2008
  • #1
ok Im in need of some help with my motor, i got the block and rotating assembly back from the machine shop and began assembly, now heres the problem, after getting all the main bearings in and the thrust in the center and torquing all the mains down , the crank wont turn at all (everything is lubed well). Also after loosening the center main with the thrust, the crank turns. im not really sure what to do and BTW all parts being used are new.

ANY help is appreciated
 

faststang90

10 Year Member
Nov 5, 2007
522
16
49
baytown texas
Aug 17, 2008
#2
  • Aug 17, 2008
  • #2
did u get the block checked to see if the mains was all inline and did they check the size of the mains. sounds like its the mains are not line bored. if u can pull the crank out and install the mains with bearnings check the size to the .001s of a inch and see if it too small. did they check the size of the crank mains at the shop something i know is just because its new does not make it good
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 17, 2008
#3
  • Aug 17, 2008
  • #3
whats the clearance after the mains are torqued down? Did you use the plastiguage to see what the real clearance is?
 
9

92notch6886

New Member
Nov 15, 2006
15
0
0
Aug 17, 2008
#4
  • Aug 17, 2008
  • #4
yeah i checked plastigauge-it was 0.015 torqued at 70 lbs

yeah the guy at the shop line bored them too, but im gonna gonna call or go by and talk to him to make sure
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
703
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
335
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
213
Views
5K
Classic Mustang Specific Tech Wednesday at 6:44 PM
DadLife0724
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
883
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?