Progress Thread Make the Notchback Great Again!

87cooper · Aug 18, 2023

I have not enjoyed or driven my car in over 10 yrs and I'm ready to fall back in love with the car. I'm struggling on where to invest on the car ( suspension, paint/body). I can do engines swap etc, but I'm NO paint or body guy. I have zero plans on running at the track and I don't care about leaving the car Original/ OEM. Now that I'm older I can't do cat-less pipes and the drone anymore. I look forward to everyone's feedback and their knowledge.

Items that I'm must have and will buy.

- Terminator X . (Purchased 8/20/23)
- All A/C compontents
- Swap to 5 lug
- New 5 lug wheels and tires
- Caddy front brake kit and taurus rear brakes
- All new Exhaust w/ Catted pipes, shorty headers
- New steel hood

Parts I would like to have:
- K Member
- coilovers
- bolt on subframe connectors ( changed to full length)

AeroCoupe · Aug 18, 2023

Bypass the bolt in subframe connectors and go weld in full length. You will have zero regrets doing this.

Noobz347 · Aug 18, 2023

...and forget about the K-member unless you have a specific reason for getting one. A-arms, I get. K-member for street-driven car? There's none more robust than the OEM piece.

Mustang5L5 · Aug 18, 2023

I agree. I have an MM k-member in my car and in hindsight, i could have gone without it. Unless you need it for an engine swap, or road racing, or clearance with headers, use the stocker.

87cooper · Aug 18, 2023

Noobz347 said:
...and forget about the K-member unless you have a specific reason for getting one. A-arms, I get. K-member for street-driven car? There's none more robust than the OEM piece.

I like the 40 lbs saving and options to use larger oil pan and thought one would have more options with exhaust headers fitment.
I'm not sure the kmember will fit my budget, anyways.

AeroCoupe said:
Bypass the bolt in subframe connectors and go weld in full length. You will have zero regrets doing this.

Thanks, after a little searching, these look good.https://www.globalwest.net/mustang-full-length-subframe-connectors-1979-1993-global-west-suspension.html

87cooper · Aug 18, 2023

Mustang5L5 said:
I agree. I have an MM k-member in my car and in hindsight, i could have gone without it. Unless you need it for an engine swap, or road racing, or clearance with headers, use the stocker.

Is your car lowered any?

Mustang5L5 · Aug 18, 2023

87cooper said:
Is your car lowered any?

Yes. I have the entire Max Motorsports catalog on the car.

bird_dog0347 · Aug 18, 2023

87cooper said:
I like the 40 lbs saving and options to use larger oil pan and thought one would have more options with exhaust headers fitment.
I'm not sure the kmember will fit my budget, anyways.

Thanks, after a little searching, these look good.https://www.globalwest.net/mustang-full-length-subframe-connectors-1979-1993-global-west-suspension.html

No, just get the Maximum Motorsports full length weld in SFC's. Black powder coated link below, or the bare steel for like 30-40 bucks less.

https://lmr.com/item/MM-MMFL5PC/79-04-Mustang-Maximum-Motorsports-Black-Powdercoated-Full-Length-Subframe-Connectors

Noobz347 · Aug 18, 2023

87cooper said:
I like the 40 lbs saving and options to use larger oil pan and thought one would have more options with exhaust headers fitment.
I'm not sure the kmember will fit my budget, anyways.

Yeah, I get ya but put that money toward aluminum heads and exhaust.

Question: What's the Terminator X for? Nothing on your wishlist warrants swapping the ECU. You can do a lot of mods to a 302 before you need to start tuning. Particularly, if it's a mass air car.

AeroCoupe · Aug 19, 2023

F that man, run the Global West units. I have them on both cars and they are fantastic! They lay in next to the existing subframes so the ground clearance is maximized and they work with the MM torque arm. I run the full MM suspension under the Coupe and MM specifically calls out that their torque arm will work with them.

And F a stock k-member if you have the means to get a tubular. Way more room to work on the car, improved geometry, and lighter. I have a MM k-member in the Coupe and a Griggs unit in the T-Bird. Both are rock solid for the street.

87cooper · Aug 19, 2023

Noobz347 said:
Yeah, I get ya but put that money toward aluminum heads and exhaust.

Question: What's the Terminator X for? Nothing on your wishlist warrants swapping the ECU. You can do a lot of mods to a 302 before you need to start tuning. Particularly, if it's a mass air car.

My Ecu's capacitors took a dump. I'm running 331 with EB performer heads, RPM II intake, and I can not remember which cam I have. . I like the all the flexibility with the Terminator.

Noobz347 · Aug 19, 2023

87cooper said:
My Ecu's capacitors took a dump. I'm running 331 with EB performer heads, RPM II intake, and I can not remember which cam I have. . I like the all the flexibility with the Terminator.

You might lead with that info next time.

87cooper · Aug 19, 2023

Noobz347 said:
You might lead with that info next time.

I hear ya! I went with a synopsis instead of writing a book post.

Noobz347 · Aug 19, 2023

87cooper said:
I hear ya! I went with a synopsis instead of writing a book post.

Whenever you get a wild hair, you can enter your combo and current mods here:

We skipped what you already have and went right to your wish list.

Noobz347 · Aug 19, 2023

I just made this thread your [Progress Thread] so... Spill it. We want pics and a rundown of combo and mods.

87cooper · Aug 19, 2023

Noobz347 said:
I just made this thread your [Progress Thread] so... Spill it. We want pics and a rundown of combo and mods.

LOL! It's a work in progress, so it won't be pretty. I will update current pictures!

Noobz347 · Aug 19, 2023

Man... Those are the [best] kind of progress threads.

Do not worry. All these kind folks will help you spend your money.

87cooper · Aug 19, 2023

Noobz347 said:
Man... Those are the [best] kind of progress threads.

Do not worry. All these kind folks will help you spend your money.

I can already see that! $$$

87cooper · Aug 21, 2023

The ~~good,~~ the bad and the ugly pictures posted.

Cheapskate207 · Aug 21, 2023

Nice car! Good plan too!

Progress Thread Make the Notchback Great Again!

Member

lube between the nut and the face. I know my lubes

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

Member

Member

That is…until I whipped out my Bissell

still married haven't seen testicles in years

Stangnet Facilities Maint Tech... Er... Janitor

lube between the nut and the face. I know my lubes

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Stangnet Facilities Maint Tech... Er... Janitor

Stangnet Facilities Maint Tech... Er... Janitor

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Member

The left one hangs a little lower

Similar threads

Privacy & Transparency

Privacy & Transparency