Manual brake conversion

[mpe331lx]

I am looking for the kit to convert to manual brakes on a 96-04. I am planning on building a 4v based drag car in the near future and will not need power steering or power brakes.

I will be convertring to a flaming river manual rack, so Im not just taking off the hydroboost pump. I am fully aware of the shortcomings of conveting to manual. i am just looking for help on finding the corrects parts for the job that I want to do.
I did a search and the only thread that I found was this: http://forums.stangnet.com/showthread.php?t=602182&highlight=manual+brake There was no usable info at all.

 

[LaserRed01GT]

I have done a lot of manual brake conversions on pre-93 Mustangs, but never one on a 94-04 Mustang. I would call Maximum Motorsports or Wilwood and see what they say. You will likely need a new pedal, pedal lever, pushrod, brake(stop) switch, pedal/firewall braket, and of course a manual master cylinder.

I had a Flaming River rack w/adjustable bump steer ends in my Outlaw Z28 and it worked great...even with several dropped wheelstands. View attachment 405597

View attachment 405599