6 66Stanger New Member Dec 30, 2003 14 0 0 Dec 29, 2004 #1 Dec 29, 2004 #1 Hi guys, I lost the manual instruction for Pertronix Ignitor If anybody can send me because there is not on Official Pertronix website. Thank you,
Hi guys, I lost the manual instruction for Pertronix Ignitor If anybody can send me because there is not on Official Pertronix website. Thank you,
R Red66GT New Member Jul 14, 2003 214 0 0 Simi Valley, CA Dec 29, 2004 #2 Dec 29, 2004 #2 This link should help... http://www.mustangmonthly.com/howto/173_0310_pertronix_ignitor_ignition/
6 66Stanger New Member Dec 30, 2003 14 0 0 Dec 30, 2004 #3 Dec 30, 2004 #3 Red66GT said: This link should help... http://www.mustangmonthly.com/howto/173_0310_pertronix_ignitor_ignition/ Click to expand... Thank you Red66GT Mustang Monthly link... of course I had forget them
Red66GT said: This link should help... http://www.mustangmonthly.com/howto/173_0310_pertronix_ignitor_ignition/ Click to expand... Thank you Red66GT Mustang Monthly link... of course I had forget them
Max Power Active Member Jul 31, 2003 1,774 1 36 St Paul Dec 30, 2004 #4 Dec 30, 2004 #4 There IS an official Pertronix website.
jeffnoel Founding Member Aug 31, 2002 1,638 5 37 Clovis, CA Dec 30, 2004 #5 Dec 30, 2004 #5 Max Power said: There IS an official Pertronix website. Click to expand... Like this one, http://www.pertronix.com/
Max Power said: There IS an official Pertronix website. Click to expand... Like this one, http://www.pertronix.com/
6 66Stanger New Member Dec 30, 2003 14 0 0 Dec 30, 2004 #6 Dec 30, 2004 #6 jeffnoel said: Like this one, http://www.pertronix.com/ Click to expand... Of course guys, but manuals are not available (coming soon...)
jeffnoel said: Like this one, http://www.pertronix.com/ Click to expand... Of course guys, but manuals are not available (coming soon...)
1 10secgoal Active Member Dec 1, 2003 2,801 3 49 San Diego Dec 30, 2004 #7 Dec 30, 2004 #7 Make sure you have a full 12v to the coil. Had one burn out and petronix said it was because the coil didn't have 12v.
Make sure you have a full 12v to the coil. Had one burn out and petronix said it was because the coil didn't have 12v.
