• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Manual to auto conversion HELP NEEDED

  • Thread starter Thread starter Lubedube96
  • Start date Start date Apr 16, 2018
  • 1
  • 2
Next
1 of 2 Next Last
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#1
  • Apr 16, 2018
  • #1
Hey im 16 and just old enough to buy a car and ive found this amazing mustang and the only say my parents will help me buy it is if i convert it from manual to automatic. How do i do this without destroying my chances of converting back
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Apr 16, 2018
#2
  • Apr 16, 2018
  • #2
What year, model mustang are we talking about?
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#3
  • Apr 16, 2018
  • #3
karthief said:
What year, model mustang are we talking about?
Click to expand...
1993 2.3l
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Apr 16, 2018
#4
  • Apr 16, 2018
  • #4
Why not just find one that's already an automatic? Or what is your parents opposition to driving a stick?

It's not a terribly hard swap, just will take time and $$ tracking down every little part you need. There isn't a kit, and 2.3L parts are harder to find on ebay and in the classifieds than 5.0 parts because not that many people work on 2.3's other than yanking the motor out to put in a 5.0.
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#5
  • Apr 16, 2018
  • #5
The model i found is pristine and i like the manual. My mother needs me to have an auto if i intend to have help. So i need to change it out so i can change it back in the future
 
K

kendawg73

Well-Known Member
Feb 5, 2014
474
102
64
Apr 16, 2018
#6
  • Apr 16, 2018
  • #6
Lubedube96 said:
The model i found is pristine and i like the manual. My mother needs me to have an auto if i intend to have help. So i need to change it out so i can change it back in the future
Click to expand...

why does she need you to have an auto? it's your car right?
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#7
  • Apr 16, 2018
  • #7
Limited space limited tolerence if i had the money id buy it myself and keep it manual but i need the help
 
C

Church401

Member
Mar 20, 2018
47
3
18
Apr 16, 2018
#8
  • Apr 16, 2018
  • #8
I’m not gonna lie that would be a butt load of work for no reason.
 
K

kendawg73

Well-Known Member
Feb 5, 2014
474
102
64
Apr 16, 2018
#9
  • Apr 16, 2018
  • #9
Lubedube96 said:
Limited space limited tolerence if i had the money id buy it myself and keep it manual but i need the help
Click to expand...

oh, she's needs to drive it also? then yeah that sucks... and that would be a heck of a lot of work.....
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Apr 16, 2018
#10
  • Apr 16, 2018
  • #10
Lets start here. What's your skill set? What are you capable of doing? WHo is doing the work? You?


You are going to need the trans, converter, index plate, possibly trans crossmember. A4LD shifter and cable, TV kickdown cable, interior shifter trim and possibly some wiring an an ECU. You can just disconnect the clutch cable and tie it out of the way and zip tie the 3rd pedal back. No need to reroute the speedo cable either. Might need new driveshaft as well. You'll need all the misc hardware as well.

Really the issue is going under the car and pulling the t-5 out, and then getting the A4LD back up into place. After that it's pretty easy. You might need to install an auto ECU however.
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#11
  • Apr 16, 2018
  • #11
kendawg73 said:
oh, she's needs to drive it also? then yeah that sucks... and that would be a heck of a lot of work.....
Click to expand...

Yeah basically i just need a parts list to figure out the price
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#12
  • Apr 16, 2018
  • #12
Mustang5L5 said:
Lets start here. What's your skill set? What are you capable of doing? WHo is doing the work? You?


You are going to need the trans, converter, index plate, possibly trans crossmember. A4LD shifter and cable, TV kickdown cable, interior shifter trim and possibly some wiring an an ECU. You can just disconnect the clutch cable and tie it out of the way and zip tie the 3rd pedal back. No need to reroute the speedo cable either. Might need new driveshaft as well. You'll need all the misc hardware as well.

Really the issue is going under the car and pulling the t-5 out, and then getting the A4LD back up into place. After that it's pretty easy. You might need to install an auto ECU however.
Click to expand...

So im doing all the work and ive done some drivetrain work in my auto class i have the shop space to be able to swap out the transmission and drive shaft
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#13
  • Apr 16, 2018
  • #13
Church401 said:
I’m not gonna lie that would be a butt load of work for no reason.
Click to expand...
So is having an automatic
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#14
  • Apr 16, 2018
  • #14
Mustang5L5 said:
Lets start here. What's your skill set? What are you capable of doing? WHo is doing the work? You?


You are going to need the trans, converter, index plate, possibly trans crossmember. A4LD shifter and cable, TV kickdown cable, interior shifter trim and possibly some wiring an an ECU. You can just disconnect the clutch cable and tie it out of the way and zip tie the 3rd pedal back. No need to reroute the speedo cable either. Might need new driveshaft as well. You'll need all the misc hardware as well.

Really the issue is going under the car and pulling the t-5 out, and then getting the A4LD back up into place. After that it's pretty easy. You might need to install an auto ECU however.
Click to expand...


How much do you think that could put me back
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Apr 16, 2018
#15
  • Apr 16, 2018
  • #15
Hard to say. A lot of those parts will need to be obtained used, so depending on how resourceful you are it could be fairly cheap or cost you. You could always get lucky and find someone who is parting out a car that lets you take it all for $100, or go to a boneyard and pull it all yourself.

Finding an A4LD will be your big ticket item. After that, maybe $100-200 for everything else
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Apr 16, 2018
#16
  • Apr 16, 2018
  • #16
Your best bet would be to purchase a rusted out $500 or less auto four cylinder car. Typically the cheapest are auto convertibles. Also go over the transmission good before you install it because those a4ld transmissions were very weak.
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#17
  • Apr 16, 2018
  • #17
Mustang5L5 said:
Hard to say. A lot of those parts will need to be obtained used, so depending on how resourceful you are it could be fairly cheap or cost you. You could always get lucky and find someone who is parting out a car that lets you take it all for $100, or go to a boneyard and pull it all yourself.

Finding an A4LD will be your big ticket item. After that, maybe $100-200 for everything else
Click to expand...
Yeah ive seen the auto inlind for 900 but youf saying i can get the resf from the junk yard. And that would be amazing if i could buy. Parts car for 100
 
R

Rcdgl

5 Year Member
Feb 19, 2018
321
169
63
Apr 16, 2018
#18
  • Apr 16, 2018
  • #18
Went the other way, auto to stick on my 89 fox notch. Not hard, but you will need all the pcs. The A4LD auto trans does require the auto engine computer to control the torque converter clutch lockup and the shift to overdrive. Also the radiator with the trans cooler and lines.

A rebuild on the auto trans is about $2k. I thought about doing it myself, but I had the stick stuff.

I would buy the stick coupe as quick as possible and just find someone who would want to swap later on. That should be easy.

FWIW the 89 coupe was my daughters first car as a sophomore in HS. She was not really fond of it.
 
L

Lubedube96

New Member
Apr 16, 2018
11
0
1
07416
Apr 16, 2018
#19
  • Apr 16, 2018
  • #19
Rcdgl said:
Went the other way, auto to stick on my 89 fox notch. Not hard, but you will need all the pcs. The A4LD auto trans does require the auto engine computer to control the torque converter clutch lockup and the shift to overdrive. Also the radiator with the trans cooler and lines.

A rebuild on the auto trans is about $2k. I thought about doing it myself, but I had the stick stuff.

I would buy the stick coupe as quick as possible and just find someone who would want to swap later on. That should be easy.

FWIW the 89 coupe was my daughters first car as a sophomore in HS. She was not really fond of it.
Click to expand...

What i would like to do is have a stick but id need to save up the money myself but if i figure out an auto then they help me buy it
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Apr 17, 2018
#20
  • Apr 17, 2018
  • #20
The 2.3 with auto is not an exciting drive. Can they buy the car for you and park it while you make payments to them for it so when the time comes, you can have the manual coupe to drive and enjoy
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
703
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
134
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Tuesday at 5:36 PM
AeroCoupe
O
Resolved 89 Convertible help
  • obeone66
  • Aug 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
382
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 8, 2025
LILCBRA
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
344
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
S
ECU help!
  • starkiller1134
  • Aug 16, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
476
SN95 4.6L Mustang Tech Aug 17, 2025
starkiller1134
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?