mass air conv.

R

rustyruststang5

Member

May 9, 2011

151

2

17

Ne

Jul 28, 2011

#1

• Jul 28, 2011

• #1

ok i over looked my mass air conv because i have a code 95 witch is related to the wires not running for the fuel pump relay and the vss. im having a problem locating the vss 8 pin plug. i looked behind the d/s kick panel and i have a 8 pin connector but it mainly has pink wires coming out of it non like the connector pic here in step 6.
Mustang Mass Air Conversion «

help in finding this connector so i can route the wires would be nice.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,811

234

Dublin GA

Jul 28, 2011

#2

• Jul 28, 2011

• #2

The 95 code won't cause problems in the car's performance.

What color are the wire/stripes on the driver's side kick panel connector?

If you did a add on MAF harness and a re-pin of the old computer harness, install a pin/wire in position 19 of the computer wiring harness connector. Then run the wire to the fuel pump relay pink/black wire.

 

R

rustyruststang5

Member

May 9, 2011

151

2

17

Ne

Jul 30, 2011

#3

• Jul 30, 2011

• #3

i found the wires i need to connect to on the cruise control box under the steering wheel area. plus where do you get pins to add to the computer. junkyards willnt let me cut wiring harnesses. i did find some thing that looked like the pins at the auto parts store, so im going to try that.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,811

234

Dublin GA

Jul 30, 2011

#4

• Jul 30, 2011

• #4

Autozone has a pin kit and so does RJM Injection Tech — WeatherPack Connectors. Personally I would chose the RJM kit

 

R

rustyruststang5

Member

May 9, 2011

151

2

17

Ne

Jul 30, 2011

#5

• Jul 30, 2011

• #5

thanks. the pins i got from autozone didnt work so i didnt know what i was going to do. hopefully i order the right ones on there.