mass air conversion ???

MASS air conversion instructions from http://www.stangnet.com/tech/maf/massairconversion.html FREE
A9L computer from junkyard $100-$150
70MM MAF from 94-95 Mustang GT - $40-$70
MASS Air wiring harness kit $30-$85

The whole thing is probably less than $300 using junkyard parts.

Want a 80 MM MAF from the junkyard 'cause 70 MM's too small? See http://www.pro-flow.com/old files/apchart.htm and find an 80 MM MAF that matches you injectors. You might have to swap the MAF's plastic electrical connector, but a safety pin and 10 minutes worth of effort makes that an easy job.
 
jrichker said:
Want a 80 MM MAF from the junkyard 'cause 70 MM's too small? See http://www.pro-flow.com/old files/apchart.htm and find an 80 MM MAF that matches you injectors. You might have to swap the MAF's plastic electrical connector, but a safety pin and 10 minutes worth of effort makes that an easy job.

Thanks jrichker!

I had this question but found all the info in a search, well all except the link on the 80mm... U ROCK