• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Mass Air Conversion

  • Thread starter Thread starter MikeROD16
  • Start date Start date Apr 9, 2008

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Apr 9, 2008
#1
  • Apr 9, 2008
  • #1
Hey, i wanted to know what do i need to convert from speed density to mass air. i was told its better to convert it if im going to change the cam and heads. which im going to do. but what ae the advantaged and disadvantages? thnx in advance!
 

satanas

Member
Dec 16, 2005
156
3
19
Arizona
Apr 9, 2008
#2
  • Apr 9, 2008
  • #2
you will need a computer for mass air. you will need the harness,also.Try to go to a junk yard and you might get lucky I found a computer for 25 bucks and sold it for 125.It turn out to be a 9al computer.So try to find one in the junk yard. Get the whole wirring you wont pay more than 100 buck in the yard.
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Apr 9, 2008
#3
  • Apr 9, 2008
  • #3
This is everything you need to know:

http://www.stangnet.com/tech/maf/massairconversion.html
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,119
224
Massachusetts
Apr 9, 2008
#4
  • Apr 9, 2008
  • #4
I've used the IST mass-air harness in a few vehicles. It's not OEM, but it's $40 and does the job

http://www.mass-air.com/Products.htm
 

MikeROD16

Member
Feb 4, 2008
0
0
17
Miami, FL
Apr 9, 2008
#5
  • Apr 9, 2008
  • #5
i think im going to stick with air density for now. im just having some trouble with the intake :[
 
F

Fsg231

New Member
Apr 2, 2008
19
0
0
Apr 9, 2008
#6
  • Apr 9, 2008
  • #6
the simplest way is what i did.... here what u need

... 89gt or lx harness ( only ) ( local junk yard ) $50
... 89gt or ls computer ( only ) ( local parts store ) $100
... MAF sensor from 89-91... ( ebay ) $24.50
... 2 hours
... some shade and beers. $18 i had a case

works great with ...no problems, and cheap as hell with out the hack job.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,119
224
Massachusetts
Apr 10, 2008
#7
  • Apr 10, 2008
  • #7
Where does the OEM harness plug in??


I have the IST kit, but i kinda would like to do it all OEM. Where would i plug the '89 harness into my '88's??
 
You must log in or register to reply here.

Similar threads

G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
154
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
2003-04 Mustang Cobra Brake Conversion
  • Cassiebaebae
  • Oct 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
264
1996 - 2004 SN95 Mustang -General/Talk- Oct 24, 2026
Bib36`
1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
Y
Speed density 302 to carb 351W
  • yaboity
  • May 29, 2026
  • Fox Engine Swaparoo
Replies
1
Views
231
Fox Engine Swaparoo May 29, 2026
AeroCoupe
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?