• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Mechanic SF Bay Area Convertible Windows

  • Thread starter Thread starter Traffic220
  • Start date Start date Mar 18, 2019
T

Traffic220

Member
Jan 27, 2019
5
1
13
Redwood City California
Mar 18, 2019
#1
  • Mar 18, 2019
  • #1
Hey all.

I live in the Sf Bay Area, specifically on the Peninsula. Recently i did the guides rod bracket and bushing repair on the rear quarter windows of my 88 GT. After 2 days of screwing around with it, I still can’t get the windows right. (I used the ford service manual and followed all the steps, it’s just wonky still.)

I’m looking for a recommendation for a mechanic/shop in the Bay Area who can finish this up. Adjusting the windows in these cars seem to take a specific skill I don’t have, and would like to get it done.

Any help is appreciated.

Chuck
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Mar 18, 2019
#2
  • Mar 18, 2019
  • #2
In my experience this is probably the hardest thing you’ll do on a fox after a brake booster install.

Pray?
 
Reactions: Traffic220

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,926
10,572
203
polk county florida
Mar 18, 2019
#3
  • Mar 18, 2019
  • #3
My advise is to get that book out and try again, is the interior back in the car? If not then you will be paying to take it out and likely put back in, in that case prepare yourself, the possibility of broken trim pieces, screws in the wrong place, ham fisted mechanics (a body shop would be a better choice if you have to have someone else do it) that will tighten a trim screw like it was a head bolt and busting the barrels on the trim, and on top of that hand you a bill for it. I could go on. My point would be to take a deep breath and tackle the job yourself and have the satisfaction of a job well done.
Even if it takes a couple/three rounds.
 
T

Traffic220

Member
Jan 27, 2019
5
1
13
Redwood City California
Mar 18, 2019
#4
  • Mar 18, 2019
  • #4
General karthief said:
My advise is to get that book out and try again, is the interior back in the car? If not then you will be paying to take it out and likely put back in, in that case prepare yourself, the possibility of broken trim pieces, screws in the wrong place, ham fisted mechanics (a body shop would be a better choice if you have to have someone else do it) that will tighten a trim screw like it was a head bolt and busting the barrels on the trim, and on top of that hand you a bill for it. I could go on. My point would be to take a deep breath and tackle the job yourself and have the satisfaction of a job well done.
Even if it takes a couple/three rounds.
Click to expand...

Yes I bought the book. While it was helpful, there is definitely something I am missing. The interior is still apart. I didn't want someone else taking it apart, because I was afraid their attention to detail wouldn't be up to my standard. It also gave me a chance to give it a thorough cleaning.

Basically all the work is done, it's just getting those damned windows lined up that is flummoxing me. I'm a good 5 hours into just the adjustment part of it. My hands look like hamburger, and while it's better than when I started, it is still off by enough I know I am missing something.

I made about 15 calls today and found 1 potential lead. The body shop idea is a good one, I'll try a few I know in the area with good reputations.

But any recommendations from the group here is certainly appreciated.
 

Wayne Waldrep

Before I post a pic, do you have one of yours?
20+ Year Stangneter
Apr 14, 2003
1,338
659
143
Cuba, AL
Mar 18, 2019
#5
  • Mar 18, 2019
  • #5
How about some local mustang guys around that area? That's a big place so I'm sure there's a local mustang club with quite a few car nuts. I'd rather do that than hire someone. Just thinking out loud.
 
Reactions: Traffic220
T

Traffic220

Member
Jan 27, 2019
5
1
13
Redwood City California
Mar 18, 2019
#6
  • Mar 18, 2019
  • #6
That’s a good idea. I’ll ask around. Thanks for the advice.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,926
10,572
203
polk county florida
Mar 19, 2019
#7
  • Mar 19, 2019
  • #7
A body shop and the mustang guys/club idea is good.
i feel ya on the hamburger hands.
 
You must log in or register to reply here.

Similar threads

S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
921
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
C
Paint and Body 1/4 window problems on a 1990 Mustang GT Convertible
  • CJ_GT
  • Sep 15, 2023
  • Fox 5.0 Mustang Tech
Replies
4
Views
2K
Fox 5.0 Mustang Tech Sep 16, 2023
CJ_GT
C
W
2012 Base Convertible Driver Side Power Window Will Not Work
  • wmmihail
  • May 25, 2024
  • 2010 - 2014 Specific Tech
Replies
1
Views
1K
2010 - 2014 Specific Tech May 25, 2024
Noobz347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Progress Thread Nicholase "lights out" build-
  • nicholase
  • Aug 10, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 26 27 28
Replies
552
Views
40K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Today at 12:34 PM
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?