Merkur Xr4 With Carburetor To Efi Conversion

M

MaaTrrIxx

New Member

Mar 18, 2015

3

0

1

Mar 18, 2015

#1

• Mar 18, 2015

• #1

Hi, I want to know, what should I placed in a merkur xr4 2.3 with Carburetor to make an EFI (if it possible to a secuential injection) and turbo with intercooler.


-PiMP 2.3 MicroSquirt
-PiMP 2.3 Wiring Harness
-Injectors
-Fuel pump
-Manifold intake and exhaust
-Turbo kit (intercooler, Relief valve.... and all kit).

and what else?

Thanks
PD: sorry for my english.

 

Last edited by a moderator: Mar 18, 2015

hoopty5.0

mechanicus terribilis

15 Year Member

Dec 14, 2010

7,788

6,940

214

SW Houston

Mar 18, 2015

#2

• Mar 18, 2015

• #2

I would absolutely suggest you get on the PiMP tuning forum. WesK and the other guy are very active on there and could get you started. Nobody here is very familiar with that setup, I only have a very, very basic understanding of how it works. Good luck!

 

Reactions: MaaTrrIxx

M

MaaTrrIxx

New Member

Mar 18, 2015

3

0

1

Mar 18, 2015

#3

• Mar 18, 2015

• #3

thanks to replay, and to make a EFI conversion if I buy used parts from ebay, for example, which parts would I have to buy?
-ECU
-Wiring Harness
-Injectors
-Fuel pump
-Manifold intake and exhaust
-Turbo kit (intercooler, Relief valve.... and all kit).
and what else?

 

hoopty5.0

mechanicus terribilis

15 Year Member

Dec 14, 2010

7,788

6,940

214

SW Houston

Mar 18, 2015

#4

• Mar 18, 2015

• #4

I would definitely NOT buy a used ECU or fuel pump.

 

Reactions: MaaTrrIxx

7991LXnSHO

wanna catch the space herp

10 Year Member

Sep 1, 2010

7,387

2,745

194

Kearney, NE

Mar 18, 2015

#5

• Mar 18, 2015

• #5

I am going to thread jack a bit since it is closely related. Hot Rod just trouble shot a Big Stuff 3 system, and I was thinking "I could do this (with my other Classic)!". But then I saw the prices. Has anyone gone this route, or is it real overkill for an Edelbrock Performer RPM type of motor?

Used sensors and wiring are just asking for troubles to shoot even in a stock application in my experience. How about seeing if one of the universal, self tuning systems will work with 4 cyl motors?

 

hoopty5.0

mechanicus terribilis

15 Year Member

Dec 14, 2010

7,788

6,940

214

SW Houston

Mar 18, 2015

#6

• Mar 18, 2015

• #6

You could do a TBI swap with mega squirt for really cheap. There is a step by step article on the diyautotune page

 

Reactions: MaaTrrIxx

A5literMan

At least it is lumpy...

5 Year Member

Jul 30, 2011

4,674

2,343

194

Illinois

Mar 19, 2015

#7

• Mar 19, 2015

• #7

MaaTrrIxx said:

thanks to replay, and to make a EFI conversion if I buy used parts from ebay, for example, which parts would I have to buy?
-ECU
-Wiring Harness
-Injectors
-Fuel pump
-Manifold intake and exhaust
-Turbo kit (intercooler, Relief valve.... and all kit).
and what else?

Click to expand...

The PiMP is a standalone system which means it is a ECU. I second Hoopty advice and recommend going over to the PiMP website. They will have a better idea of what all you will need.