• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Missing cylinders

  • Thread starter Thread starter 89GtConvert5spd
  • Start date Start date Sep 5, 2005

89GtConvert5spd

New Member
Sep 5, 2005
58
0
0
Sep 5, 2005
#1
  • Sep 5, 2005
  • #1
So i was driving my car around and all of a sudden it just felt like it was losing cylinders, had it to the floor in 1st and it wouldent go more than 30mph and 3 grand, the exhaust smelled strongly of gas, it idles, but rough. put a timing light on it,replaced distributor rotor and cap,checked all plugs for spark, there was a gasket leak between the throttle body and the spacer, and coolant in the intake, fixed that and it still didnt help. my next bet is a sensor? but which one.. im totally lost on this one, i really need some ideas on this one :damnit:

thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 5, 2005
#2
  • Sep 5, 2005
  • #2
First thing to do is yank the codes.

Go from there. Good luck.
 
F

fordnatic

New Member
Nov 7, 2004
28
0
0
Sep 5, 2005
#3
  • Sep 5, 2005
  • #3
so I'm curious how much coolant did you send throught the motor? When you pulled the plugs did any coolant come out? Coolant and spark plugs don't get along well, I found that out personally the hard way, keep me posted - Peace
 

89GtConvert5spd

New Member
Sep 5, 2005
58
0
0
Sep 6, 2005
#4
  • Sep 6, 2005
  • #4
no coolant in the motor that i saw,replaced the plugs, old plugs wernt to bad except the idiot didnt gap them and only put new ones in one side of the motor. and how do i "yank" the codes? and does it have a pretty good chance of being a plugged fuel injector? oh and there is no check engine lights that come on when its started
 

EN7

New Member
Aug 11, 2005
15
0
0
MI
Sep 6, 2005
#5
  • Sep 6, 2005
  • #5
89GtConvert5spd said:
no coolant in the motor that i saw,replaced the plugs, old plugs wernt to bad except the idiot didnt gap them and only put new ones in one side of the motor. and how do i "yank" the codes? and does it have a pretty good chance of being a plugged fuel injector? oh and there is no check engine lights that come on when its started
Click to expand...


What I usualy do is take it to a local AutoZone and ask one of the sales clerks if they can read my codes. If that doesen't show something, I take it to a local shop and have a full diagnostic done (~$75). Your engine light won't always come on if theres engine trouble and the computer is throwing codes.
Good luck
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
395
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
R
Microsquirt tune for stroked 351W in a foxbody
  • roldy
  • Jul 26, 2026
  • Digital Self-tuning Forum
Replies
7
Views
409
Digital Self-tuning Forum Oct 25, 2026
roldy
R
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?