Drivetrain Missing Parts For New Clutch Cable Install

GoldenEagle91

Active Member

Dec 25, 2012

240

16

29

Dec 1, 2013

#1

• Dec 1, 2013

• #1

Hi guys,

I bought a new ford racing clutch kit for my 79 Ghia and there are parts missing from the current setup on the car which are hindering me from starting this job. I am missing the clip to hold the cable in place as shown on the cable picture. And I am missing the part on the fork that goes to the left of where the rounded end of the cable goes. If anyone knows where I am able to find these parts as I have described please let me know.

Andrew

 

RangerJoe

I leave the horn on while driving

15 Year Member

Apr 26, 2010

2,560

1,146

184

Georgia

Dec 1, 2013

#2

• Dec 1, 2013

• #2

http://www.cjponyparts.com/ford-clutch-cable-retaining-clip-at-bellhousing-1979-2004/p/HW2944/

http://www.cjponyparts.com/product....ign=shopping&gclid=CNiXx6aIkLsCFSvl7AodIVQAcg

Joe

 

GoldenEagle91

Active Member

Dec 25, 2012

240

16

29

Dec 1, 2013

#3

• Dec 1, 2013

• #3

Based on your response I'm assuming that there is nothing that goes in on that left side in the clutch release fork. Is that correct?

 

R

racerxmd

Member

Jun 18, 2013

84

15

19

Maryland

Dec 1, 2013

#4

• Dec 1, 2013

• #4

GoldenEagle91 said:

Based on your response I'm assuming that there is nothing that goes in on that left side in the clutch release fork. Is that correct?

Click to expand...

Correct. That larger hole is just to slide cable in and then slide onto smaller hole opening. Thus the cable end has a pinched lead piece that has to be able to enter onto the clutch fork and with the small hole that will not let the cable slip back out .

 

GoldenEagle91

Active Member

Dec 25, 2012

240

16

29

Dec 2, 2013

#5

• Dec 2, 2013

• #5

Sounds great. Thank you guys for clearing that up!

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Dec 3, 2013

#6

• Dec 3, 2013

• #6

 

GoldenEagle91

Active Member

Dec 25, 2012

240

16

29

Dec 3, 2013

#7

• Dec 3, 2013

• #7

Great video! Looks pretty simple to do. Thanks man

 

Grabbin' Asphalt

10 Year Member

Jun 10, 2013

2,029

310

124

Atlanta, Ga

Dec 3, 2013

#8

• Dec 3, 2013

• #8

im a visual learner and i think its a pretty good visual tool

 

Reactions: GoldenEagle91