Missing Tranny Bolts

65 A Code

Member
Apr 6, 2004
136
1
17
Before the crash someone had posted part number for bolts that could be purchased from Home depot that would work for the 2 missing tranny bolts. Anyone know what the part number was?

Thanks
 
I do not know the HD part#, but I know it is 10mm x 1.5mm thread. Length is pretty short

Also, I found this pic on the web
Boltfix.jpg
 
65 A Code said:
Before the crash someone had posted part number for bolts that could be purchased from Home depot that would work for the 2 missing tranny bolts. Anyone know what the part number was?

Thanks


That was me who posted the home depot part number. I can't seem to find it now. I'll re post if I locate it. the reply with the picture above is correct.

home depo upc
crown bolt inc
3069939808
hex bolt hex head
10mm - 1.5 x 16mm
steel / zinc plated
 
There is no such thing as swinging by a ford dealership. I could tell them what was missing or wrong, then they would have to go varify it. Then come back and tell me I don't know what I am talking about. so I show them again and they see the light. 3 to 4 hours later, I have 2 new bolts installed for free minus the waste of my time. I figure 75 cents for 2 bolts and 5 mins of putting them in works out better.

Speaking of I had the bolts installed by me on the car quicker than it took me to write this.... :D
 
65 A Code said:
There is no such thing as swinging by a ford dealership. I could tell them what was missing or wrong, then they would have to go varify it. Then come back and tell me I don't know what I am talking about. so I show them again and they see the light. 3 to 4 hours later, I have 2 new bolts installed for free minus the waste of my time. I figure 75 cents for 2 bolts and 5 mins of putting them in works out better.

Speaking of I had the bolts installed by me on the car quicker than it took me to write this.... :D

RIGHT ON - most dealers try to kidnap you :rlaugh: