• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

missing under 1500 rpms

  • Thread starter Thread starter v8tiger
  • Start date Start date Mar 7, 2007
V

v8tiger

New Member
May 10, 2006
19
0
0
Mar 7, 2007
#1
  • Mar 7, 2007
  • #1
88 Gt with mods are Gt40x, e303, cobra intake. roller rockers, bbk shortys, and MAF conv.

Just installed them, and now it misses when the engine is cold really bad. But when it warms up, its only before 1500 rpms. timning is around 12.

and why would there be oil on the last two ports of the intake when you take the upper off?? The gasket is wet of oil just on the last two holes.
 

goodfastncheap

Member
Dec 25, 2006
100
0
17
Bellevue, NE
Mar 7, 2007
#2
  • Mar 7, 2007
  • #2
I would suggest that you eliminate the possibility that a vacuum leak is causing your miss before moving on to other things:
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

Check around bolted surfaces with light oil, too.

The oil on the intake you mention could be coming from the pcv...
 
J

JJs89lx

Member
Aug 24, 2006
39
0
6
Mar 7, 2007
#3
  • Mar 7, 2007
  • #3
Happen to me the other day in the coupe.... I was pissed! But it was my Air to fuel mixture and the computer setting! At lease that was my problem... Hope it helps some! - JJ
 
V

v8tiger

New Member
May 10, 2006
19
0
0
Mar 7, 2007
#4
  • Mar 7, 2007
  • #4
how do you check if the air to fuel mixture is correct.

I had a terrible miss before whent he lower intake was leaking vacumme. But i fixed that, and i didnt think that it was still leaking.
 

goodfastncheap

Member
Dec 25, 2006
100
0
17
Bellevue, NE
Mar 7, 2007
#5
  • Mar 7, 2007
  • #5
If you have thoroughly checked all your vac lines and connections and they're all correctly connected and there are no leaks, and you are sure that your lower intake is not leaking, then my next step might be to ensure that all of your harness connections are snug. If so, then pull codes:
http://www.troublecodes.net/Ford/
 

SPEEDYLIFSAVR

Founding Member
Sep 18, 2000
666
0
16
FL,89 LX 5.0
Mar 7, 2007
#6
  • Mar 7, 2007
  • #6
What kind of intake setting are you using (CAI) and how is your MAF meter installed?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 7, 2007
#7
  • Mar 7, 2007
  • #7
Do you have any codes?

HOw is the cold idle enrichment function? Do you have to hold the gas pedal down when the engine is cold? Has the ECT been checked for calibration?



Good luck.
 
T

Trefty

Member
Aug 13, 2004
117
0
16
Mar 7, 2007
#8
  • Mar 7, 2007
  • #8
Edit, NVM.
 

mustanggt5pt0

New Member
Sep 27, 2004
34
0
0
Cedar Falls, Iowa
Mar 7, 2007
#9
  • Mar 7, 2007
  • #9
v8tiger said:
88 Gt with mods are Gt40x, e303, cobra intake. roller rockers, bbk shortys, and MAF conv.

Just installed them, and now it misses when the engine is cold really bad. But when it warms up, its only before 1500 rpms. timning is around 12.

and why would there be oil on the last two ports of the intake when you take the upper off?? The gasket is wet of oil just on the last two holes.
Click to expand...

The reason you might have oil is becasue if you are running the chinese (replica) version of the cobra intake manifold the baffle is not large enough to keep oil from getting into the intake. There are plenty of threads concerning this issue, just search cobra intake.
 
V

v8tiger

New Member
May 10, 2006
19
0
0
Mar 8, 2007
#10
  • Mar 8, 2007
  • #10
is the oil hurting anything?

And also. when i checked for a vacumme leak today, i couldnt find any.

I set the timing to 14-15 and idle to 900. It idles way better. And my TPS is at 1.10
i had it set at .98 before i raised idle.

the check engine light is not on.

i will check for codes tonight.
 
V

v8tiger

New Member
May 10, 2006
19
0
0
Mar 9, 2007
#11
  • Mar 9, 2007
  • #11
so now i checked the codes and it says Code 66. MAF input voltage too low.

So i went to the parts store and tried a new Sensor and it did the same thing.

Also i noticed with the sensor unplugged it runs the same.
 
You must log in or register to reply here.

Similar threads

9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
606
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
G
Sputtering/misfiring below 2500rpm
  • Godless
  • Sep 14, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
5
Views
579
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2025
gkomo
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
622
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?