• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Progress Thread Mob's Progress Thread - Struggles of condo living

  • Thread starter Thread starter mob
  • Start date Start date Apr 19, 2020
  • 1
  • 2
Next
1 of 2 Next Last

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#1
  • Apr 19, 2020
  • #1
Hey guys, haven't been around in a long time but I am back, for any old timers who remember me.

**Life story**
About 6 years ago or so I moved to Dallas, TX and have been living in apartments since. Without a real place to work on my car it sat in storage for years. For about a year it also sat outside in a storage parking lot space where mother nature had it's way with it (along with some stragglers who wandered in). A couple years ago I moved the car to my mothers garage which is about 35 minutes away from me. I've been super busy these past couple years trying to focus on my career I haven't had anytime to work on the car and it's just basically been sitting for a very very long time. Anyways I am taking my car out of hibernation and I am going to get this beast cleaned up and running again!

**Ok back to the car**
The car just stopped running a few years back, it would crank but it wasn't getting fuel, I could spray starter fluid and it would start for a second but that's it. So now that I have a little bit of money, and I have A LOT of time (COVID19) I decided it's the perfect time to start restoring her and clean her up.

There has been gas sitting in it for about 4 years, which I now know to be exactly 2.5 gallons. I decided I needed to get the gas out and easiest way would be to drop the tank and inspect everything. I decided since a new gas tank is so cheap I might as well replace it. The fuel pump was not too old in the car so I decided I would reuse the fuel pump and sending unit. I had done some reading and saw a lot of people saying replacing the gas tank isn't necessary but it's cheap and I had the time so I said lets do it. Boy was I in for a surprise when I dropped it. You can see in the pics below the inside was rusted to s**t! The fuel strainer had almost completely disintegrated and the gas came out black. I was planning on reusing the fuel pump and sending unit but they are also completely rusted so I just ordered all new assembly, sending unit, and Walbro 255lph.

Anyways sorry for the long catch up post, enjoy the pics below of what I did this weekend. I am going to slowly continue to make more progress, next week I should have pics of the new pump assembly and the tank going back up and if all is well a startup video!





Storage closet turned into paint booth



 
Last edited: Apr 21, 2020
Reactions: Potomus Pete, 90sickfox, Olivethefet and 2 others

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#2
  • Apr 19, 2020
  • #2
more pics










 
Reactions: Olivethefet and Mustang5L5

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#3
  • Apr 19, 2020
  • #3
More!




If you zoom in here you can see the mesh from the fuel strainer almost looks like its fused to the bottom of the tank.




Started to suspect someone poured something in my tank to make it corrode like this. Or maybe just crappy seals and mother nature?





 
Last edited: Apr 19, 2020
Reactions: General karthief

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#4
  • Apr 19, 2020
  • #4
Last pics for the week, installed new alternator and fuel pressure gauge as well.






 
Reactions: 95BlueStallion

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Apr 19, 2020
#5
  • Apr 19, 2020
  • #5
Welcome back. I’m with you on replacing the tank. I did the tank, fuel pump, sending unit, filler grommet, etc on my car a few years ago. That build up is probably just condensation from years of sitting.

Hilarious using the closet as a paint booth, rather than wheeling the car out and using the garage, lol. Looks like it worked fine though! Good luck with the refresh, keep us posted.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,914
10,563
203
polk county florida
Apr 19, 2020
#6
  • Apr 19, 2020
  • #6
I know you are in TX now but are you from Florida?
I spotted the tag.
Oh, and good to see a come back!
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#7
  • Apr 19, 2020
  • #7
95BlueStallion said:
Hilarious using the closet as a paint booth, rather than wheeling the car out and using the garage, lol. Looks like it worked fine though! Good luck with the refresh, keep us posted.
Click to expand...

haha well I was doing all the prep at my condo, the car is at my mom's so I had to bring everything there ready to go.


General karthief said:
I know you are in TX now but are you from Florida?
I spotted the tag.
Oh, and good to see a come back!
Click to expand...

Yea, I grew up mostly my whole life in FL, Orlando specifically. But I'm pretty Texan now.
 
Reactions: General karthief and 95BlueStallion

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,914
10,563
203
polk county florida
Apr 19, 2020
#8
  • Apr 19, 2020
  • #8
We used to be neighbors, kinda sorta like, you're in good company over there in Tx, a few members hang'n out over there.
 
Reactions: mob

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#9
  • Apr 19, 2020
  • #9
Some plans for the car:

- The car is pretty beat up so my overall goal right now is to just restore things that are broken and get it cleaned up looking as close to new as possible. I won't have money for paint anytime soon but at least the interior and drive train.

- Currently have GT40p's, always wanted to go aluminum so I may be on the look out for a pair.

- Would like to put a turbo on it thinking an On3 kit because of the price. I'm cheap and always on a budget.

Here's some old pics in case someone doesn't recognize the current state of my car.





 
Last edited: Feb 26, 2022
Reactions: Potomus Pete, Olivethefet and General karthief

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#10
  • Apr 19, 2020
  • #10
General karthief said:
We used to be neighbors, kinda sorta like, you're in good company over there in Tx, a few members hang'n out over there.
Click to expand...

I know Texas has a huge car scene but man I just haven't been able to find it. Maybe it's because I'm in Dallas where the only thing that matters is if you drive a BMW or Mercedes and people's toy cars are Ferrari's and Mclaren's. Driving my loud boxy Mustang with two colors, the only thing I need is a mullet to complete people's impression of me. I think Houston is probably closer to my scene.

In Orlando there was a huge car scene, car meets at fast food joints, every traffic light there's something in the line up whether it's a riced out Civic or cammed Corvette, you don't see that here.
 
J

Jalapeno5

Member
Apr 9, 2020
33
11
18
Minnesota
Apr 19, 2020
#11
  • Apr 19, 2020
  • #11
It's always nice to see somebody getting an old fox back on the road. I like the choice of wheels on the white! It looks good! Are you going back to the GT front or are you keeping the Lx/Saleen styling?
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 19, 2020
#12
  • Apr 19, 2020
  • #12
Jalapeno5 said:
It's always nice to see somebody getting an old fox back on the road. I like the choice of wheels on the white! It looks good! Are you going back to the GT front or are you keeping the Lx/Saleen styling?
Click to expand...

Thanks! I haven't decided yet, I still got the LX bumper but I sold the Saleen front piece years back when I needed the money. I have been heavily considering repurchasing the Saleen front end and doing some kind of cheap paint job to make it match. At least spray can primer white would be better. The GT bumper is long gone so I'd probably have to get it painted anyways if I went that route. I also have a new set of headlights but not ready to install them yet.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,914
10,563
203
polk county florida
Apr 20, 2020
#13
  • Apr 20, 2020
  • #13
mob said:
I know Texas has a huge car scene but man I just haven't been able to find it. Maybe it's because I'm in Dallas where the only thing that matters is if you drive a BMW or Mercedes and people's toy cars are Ferrari's and Mclaren's. Driving my loud boxy Mustang with two colors, the only thing I need is a mullet to complete people's impression of me. I think Houston is probably closer to my scene.

In Orlando there was a huge car scene, car meets at fast food joints, every traffic light there's something in the line up whether it's a riced out Civic or cammed Corvette, you don't see that here.
Click to expand...
I was talking about stangnet members, but I get what you're say'n.
We rock a family heirloom at local shows, it's a brand x though.
 

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Apr 20, 2020
#14
  • Apr 20, 2020
  • #14
mob said:
I know Texas has a huge car scene but man I just haven't been able to find it. Maybe it's because I'm in Dallas where the only thing that matters is if you drive a BMW or Mercedes and people's toy cars are Ferrari's and Mclaren's. Driving my loud boxy Mustang with two colors, the only thing I need is a mullet to complete people's impression of me. I think Houston is probably closer to my scene.

In Orlando there was a huge car scene, car meets at fast food joints, every traffic light there's something in the line up whether it's a riced out Civic or cammed Corvette, you don't see that here.
Click to expand...
So I run my other IG page @foxbodymustangsofaustin and Dallas has a huge following of fox body’s and some really nice ones at that. Cool guys and one guys who is doing a lot of work on the members cars he goes by @90boostcoupe and owns a shop called Doug’s garage/foxwerxs. The group is north Texas foxbody club or #NTFC, can also just hit #foxwerks on ig and you will find all the guys. They usually meet up at some sonic out there, when the times are right.
 
Reactions: General karthief

Kabuki_notch

Founding Member
Nov 19, 2001
670
394
113
Rochester, NY
Apr 20, 2020
#15
  • Apr 20, 2020
  • #15
Hey Mob og member how are you? Glad to see your getting at it and it's great to have you back
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Apr 20, 2020
#16
  • Apr 20, 2020
  • #16
The car still looks pretty darn good!

Chris
 
Reactions: mob

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Apr 21, 2020
#17
  • Apr 21, 2020
  • #17
I like that car. Nothing like a white GT.

The issue with the tank was probably the ethanol in the gas. I use only ethanol free gas in my old cars. That stuff will start corroding metal pretty quick. There was a test a guy did a few years ago on YT. He used mason jars and piecs of steel. In 30 days the steel in the 10% ethanol jar was rusting like crazy. The straight gas jar looked new.

Ethanol vapor turns into an acid that eats metal.

View: https://youtu.be/RX0FR8HEfjs
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 28, 2020
#18
  • Apr 28, 2020
  • #18
Kabuki_notch said:
Hey Mob og member how are you? Glad to see your getting at it and it's great to have you back
Click to expand...
Been good man, glad to see you're still around.


90sickfox said:
I like that car. Nothing like a white GT.

The issue with the tank was probably the ethanol in the gas. I use only ethanol free gas in my old cars. That stuff will start corroding metal pretty quick. There was a test a guy did a few years ago on YT. He used mason jars and piecs of steel. In 30 days the steel in the 10% ethanol jar was rusting like crazy. The straight gas jar looked new.
Ethanol vapor turns into an acid that eats metal.
Click to expand...

Interesting video, I did a little research and unfortunately I don't have access to ethanol free gas anywhere near me. My plan will be to just not let it sit for so long, at least start it up and drive it around the block once a month.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Apr 28, 2020
#19
  • Apr 28, 2020
  • #19
So my parts were coming in from New York, and via the USPS none the less, so my package was delayed for like 4 days and wasn't able to finish the car this past weekend. I finally got my parts in and got everything ready to go, hopefully this weekend I will start it up. Walbro 255lph & a $45 Rock Auto fuel pump assembly.









 
Last edited: Apr 28, 2020
Reactions: 67coupe, Rdub6, 95BlueStallion and 3 others
F

Flyboy60

20+ Year Stangneter
Dec 11, 2004
115
35
38
Jan 24, 2022
#20
  • Jan 24, 2022
  • #20
Any updates - its almost a year.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
780
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Fox won't crank over and fuel pump won't kick on.
  • djj62478
  • Jun 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
317
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
General karthief
H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
762
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
135
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
958
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?