mods

94gt5.o · Jan 19, 2010

so i jus got my first mods on and they consist of a bbk fenderwel intake stage 3 chip bbk 1 5/8 equal length headers a Pipes o/r x pipe with flowmaster 40s ac and smog delete and to hanle the extra ponys a king cobra clutch with an ajustable cable and quadrent next is underdrives and 3:73s so sick of my 2:73 lol

88stang88 · Jan 19, 2010

That will make a noticeable change from stock for reasonably cheap i suppose...guess im not understanding the whole need for a stage 3 chip and what all that intails apposed to a stage 1 or 2 even? Mind spinning me up on this one?

krtw · Jan 20, 2010

I deleted the AC on my first car when I was 16....will never do that again. Sitting in traffic in the summer with no AC sucks. Damn I am getting old.....

94gt5.o · Jan 21, 2010

chip

88stang88 the stage three chip was a gift from my father and its a cheapo but it did make a small diffrence all it did though was bumped up my fuel curve but a sct hand held tuner will be replacing that soon lol and for my ac i live in washington so all i need is my windows lol and if i want to cool down i jus stomp on it a lil but i do have a question for you guys so when i put my clutch in i did a whole kit Throw out bearing ,pilot bearing etc but now my pedle vibrates and sqeals when the clutch is disingaged but when i put just a lil bit of preasure on it it stops i also just put a double hook quadrant firewall ajuster and a heavy cable in im kinda lost so any advice will help

turbogt · Jan 21, 2010

94gt5.o said:
88stang88 the stage three chip was a gift from my father and its a cheapo but it did make a small diffrence all it did though was bumped up my fuel curve but a sct hand held tuner will be replacing that soon lol and for my ac i live in washington so all i need is my windows lol and if i want to cool down i jus stomp on it a lil but i do have a question for you guys so when i put my clutch in i did a whole kit Throw out bearing ,pilot bearing etc but now my pedle vibrates and sqeals when the clutch is disingaged but when i put just a lil bit of preasure on it it stops i also just put a double hook quadrant firewall ajuster and a heavy cable in im kinda lost so any advice will help

An SCT handheld tuner will not work on your car

xr8d302 · Jan 21, 2010

x2. OBD-I says "NO!" to handheld tuners.

Don't bother doing anything yet with tuning, wait till you get some heavier mods done, then get a custom tune burnt for your car.

94gt5.o · Jan 22, 2010

ya i know i dont have enough mods yet i was talkin later down the road lol but thanks for the advice but can any body help me on my clutch problem

caribe94 · Jan 22, 2010

94gt5.o said:
ya i know i dont have enough mods yet i was talkin later down the road lol but thanks for the advice but can any body help me on my clutch problem

I had a similar issue after replacing the clutch. After reading a few posts, it seems like you have to adjust the clutch so that the release bearing does "not" contact the clutch fingers until you press on the pedal. If you go the other direction and try to adjust out all pedal play, the bearing will squeak and probably wear out faster. I read alot of threads on three different forums and that seems like what's going on. I readjusted mine with the firewall adjuster with car idling until squeaking stopped. Cluct pedal is not as "precise" as I am used to with hydraulic clutches, but no more noise.
Maybe more experenced guys have a different solution?

94gt5.o · Jan 23, 2010

well after takin my tranny out i discoverd that my bearing retainer was shot so it wasent holding my fork tight like it should so i ordered up a steel one so hopefully that will fix it

mods

94gt5.o

New Member

88stang88

krtw

New Member

94gt5.o

New Member

turbogt

Member

xr8d302

I bought a 27" monitor to compensate for my lack o

94gt5.o

New Member

caribe94

New Member

94gt5.o

New Member

Similar threads

mods

New Member

New Member

New Member

Member

I bought a 27" monitor to compensate for my lack o

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency