mods

[94gt5.o]

so i jus got my first mods on and they consist of a bbk fenderwel intake stage 3 chip bbk 1 5/8 equal length headers a Pipes o/r x pipe with flowmaster 40s ac and smog delete and to hanle the extra ponys a king cobra clutch with an ajustable cable and quadrent next is underdrives and 3:73s so sick of my 2:73 lol

 

[88stang88]

That will make a noticeable change from stock for reasonably cheap i suppose...guess im not understanding the whole need for a stage 3 chip and what all that intails apposed to a stage 1 or 2 even? Mind spinning me up on this one?

 

[krtw]

I deleted the AC on my first car when I was 16....will never do that again. Sitting in traffic in the summer with no AC sucks. Damn I am getting old.....

 

[94gt5.o]

chip

88stang88 the stage three chip was a gift from my father and its a cheapo but it did make a small diffrence all it did though was bumped up my fuel curve but a sct hand held tuner will be replacing that soon lol and for my ac i live in washington so all i need is my windows lol and if i want to cool down i jus stomp on it a lil but i do have a question for you guys so when i put my clutch in i did a whole kit Throw out bearing ,pilot bearing etc but now my pedle vibrates and sqeals when the clutch is disingaged but when i put just a lil bit of preasure on it it stops i also just put a double hook quadrant firewall ajuster and a heavy cable in im kinda lost so any advice will help

 

[turbogt]

88stang88 the stage three chip was a gift from my father and its a cheapo but it did make a small diffrence all it did though was bumped up my fuel curve but a sct hand held tuner will be replacing that soon lol and for my ac i live in washington so all i need is my windows lol and if i want to cool down i jus stomp on it a lil but i do have a question for you guys so when i put my clutch in i did a whole kit Throw out bearing ,pilot bearing etc but now my pedle vibrates and sqeals when the clutch is disingaged but when i put just a lil bit of preasure on it it stops i also just put a double hook quadrant firewall ajuster and a heavy cable in im kinda lost so any advice will help

An SCT handheld tuner will not work on your car

 

[xr8d302]

x2. OBD-I says "NO!" to handheld tuners.

Don't bother doing anything yet with tuning, wait till you get some heavier mods done, then get a custom tune burnt for your car.

 

[94gt5.o]

ya i know i dont have enough mods yet i was talkin later down the road lol but thanks for the advice but can any body help me on my clutch problem

 

[caribe94]

ya i know i dont have enough mods yet i was talkin later down the road lol but thanks for the advice but can any body help me on my clutch problem

I had a similar issue after replacing the clutch. After reading a few posts, it seems like you have to adjust the clutch so that the release bearing does "not" contact the clutch fingers until you press on the pedal. If you go the other direction and try to adjust out all pedal play, the bearing will squeak and probably wear out faster. I read alot of threads on three different forums and that seems like what's going on. I readjusted mine with the firewall adjuster with car idling until squeaking stopped. Cluct pedal is not as "precise" as I am used to with hydraulic clutches, but no more noise.
Maybe more experenced guys have a different solution?

 

[94gt5.o]

well after takin my tranny out i discoverd that my bearing retainer was shot so it wasent holding my fork tight like it should so i ordered up a steel one so hopefully that will fix it