more bling bling

1105 · Oct 11, 2005

Just got finished polishing up my fox IAC I pulled out of a JY I'm going to start swearing by these blue roloc disks that are hard to find because they kick ass! I just sanded it down with one of thoes disks, nothing else. Yea there's areas where the disk can't get to, but I dont care because they are small.

Total time under 10 minutes

yellowstang1994 · Oct 11, 2005

Freaking sweeet! What are these blue roloc discs you speak of?

1105 · Oct 11, 2005

These... the far right one. Looks greenish/blue

NotQuik · Oct 11, 2005

which junkyard do you go to up there for mustang parts?

mo_dingo · Oct 11, 2005

yeah, we get those at my work. I don't know who the distributor or manufacturer is though. If you want, I can check.

They work great, and you can swap them out so fast when using different grits.
Scott

1105 · Oct 11, 2005

See if you can find who you get them from Scott. At my work we only have local people that stop buy so I can't give any names that would help anyone.

1bad, There is a place called Pull-n-Save off of International Speedway Blvd. in Daytona. They have a lot of 5.0L cars there, mostly crown vics and t-birds but the enging is basically the same. There is a few 5.0L mustangs there, but the majority is the other.

What part of central FL are you from?

NotQuik · Oct 16, 2005

Where at on International speedway? Do you go west off 95 I assume? I'm in cooca, not too far from ya at all

1105 · Oct 16, 2005

Yes, head north on 95, then take the ISB exit then turn west on ISB. Head down and you'll see it, its in a fenced in area and big letters that say Pull-n-save on the building. You'll have to pass it then do a U-turn to get back to it.

RIO5.0 · Oct 16, 2005

I did mine up to...Nice little detail when done...Cant see your pic?? I have yet to round up the stuff to polish...These are just sanded then hit with Scotch-Brite pad...Ghetto style...
I wanted polish my wheels this Winter...take the paint off the centers and do em up...

1105 · Oct 17, 2005

I uploaded the picture again Andy so it'll show in my orginial post. Your's looks nice, how did you paint inside the ford logo red?

RIO5.0 · Oct 17, 2005

Slick...That looks great...I really have to get some polishing supplies....My Winter project is to polish my wheels and an Accufab 75 I bought, ...I'm gonna swap over to a tubular GT40 upper also...so I'm gonna learn one way or the other and have plenty of stuff to practice on...
I only buy the OEM Ford ones as I like the logo in there...Those letters SHOULD be slightly raised... After I'm done doing it up...I just cover the entire area with a couple coats of paint, then using something flat with fine paper gently sand and the logo comes thru...

nmcgrawj · Oct 17, 2005

mo_dingo said:
yeah, we get those at my work. I don't know who the distributor or manufacturer is though. If you want, I can check.

They work great, and you can swap them out so fast when using different grits.
Scott

Any updates?

mo_dingo · Oct 17, 2005

nmcgrawj said:
Any updates?

I went into my parts department and I got stuck asking one of the gumpy old bastards who basically blew me off. I will try again tomorrow...Thanks for reminding me.
Scott

Threeotwo94 · Oct 18, 2005

At my job we get them from a company called Lawson. They make little things...all the way down to black valve stem covers. The techs use those disks (we call them cookies) to sand down the inside of rusted rotors.

mo_dingo · Oct 19, 2005

nmcgrawj said:
Any updates?

Here is the info on them. My parts department gets them through a place called Tucson Abrasives. They are a licensed 3M dealer. They will ship to anywhere in the U.S. Here is their info.

Tucson Abrasives
3525 S Palo Verde Rd
Tucson, AZ 85713 - 5427
(520) 791-3026

If you can find a local distributor for 3M in your town, they should be able to get them for you. They are available in many different grits. I think they are called roloc's or speedloc's....I can't remember which.....
Scott

nmcgrawj · Oct 19, 2005

What grit do u guys use in those pics above? Im new to this polishing scene....

thanks

NotQuik · Oct 20, 2005

me too, both look great.....hey 1105 are you heading over to the turkey rod run next month?

1105 · Oct 21, 2005

1bad, I'll probably head on over there on a sunday, since I work on friday and saturday.

Nate, I'm not sure what the grit is, but it has to be pretty fine.

Nik_95Cobra · Oct 21, 2005

Dang I was looking for some of those pads but our Snap-on, Matco, and Mac guys all only had the coarse brown pad, I'll have to get them to order me some of the blue ones, that looks cool.

1105 · Oct 21, 2005

I just got my bag of 25 from the parts guy but havent used them on anything else. To whoever wants to try these, see if you can just get 1 or 2 to try out first to see if you think they are worth it... Don't just go by my word. They are somewhat expencive so I don't want people to have a lot and hate how the end result looks.

more bling bling

1105

I AM the random post master...bow down

yellowstang1994

New Member

1105

I AM the random post master...bow down

Attachments

NotQuik

mo_dingo

1105

I AM the random post master...bow down

NotQuik

1105

I AM the random post master...bow down

RIO5.0

1105

I AM the random post master...bow down

RIO5.0

nmcgrawj

Advanced Member

mo_dingo

Threeotwo94

New Member

mo_dingo

nmcgrawj

Advanced Member

NotQuik

1105

I AM the random post master...bow down

Nik_95Cobra

1105

I AM the random post master...bow down

Similar threads

more bling bling

I AM the random post master...bow down

New Member

I AM the random post master...bow down

Attachments

I AM the random post master...bow down

I AM the random post master...bow down

I AM the random post master...bow down

Advanced Member

New Member

Advanced Member

I AM the random post master...bow down

I AM the random post master...bow down

Similar threads

Privacy & Transparency

Privacy & Transparency