• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

more horse power help

  • Thread starter Thread starter chr1s11575stang
  • Start date Start date Sep 5, 2007

chr1s11575stang

New Member
Aug 16, 2007
64
0
0
Orlando, Fl
Sep 5, 2007
#1
  • Sep 5, 2007
  • #1
I have a stock 1990 gt with the 302. I have gt40 p heads. I have bbk headers with spintek mufflers that dump at the rear. Also i have the 3 coil radiator. What can I do with this to get more horse power....also I have the stock air filter on there. Oh yeah Id prefer to just do bolt ons if possible without changing too much. thanks
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Sep 5, 2007
#2
  • Sep 5, 2007
  • #2
Under drive pulleys and a k&n panel filter.

On a budget? do the junkyard upgrade...

Gears - 87-88 T-Bird Turbo Coupe rear axle - disc brakes and 3.55 or 3.73 gears in one package for $125-$300. Add another $100-$200 or so to complete the brake upgrade.

94-95 Mustang GT MAF - $40-$100. It is 70 MM instead of the stock 55 MM on regular stangs built prior to 94. It uses a slip on duct on the side that goes to the throttle body and a 4 bolt flange on the other. You need a flange adapter to fit the stock slip on air ducting that goes to the air box. Wiring plugs right in with no changes. *1 *2

95-97 Ford Explorer intake manifold & throttle body $150-$300. The intake manifold flows 220 CFM +, much better than stock. Throttle body is 65 MM, bigger than the 60 MM on stock stangs. I got a 96 with EGR passages that match the stock setup, so my smog gear works just like factory. You’ll need a 65 MM EGR spacer & new gaskets for $65-$90 so you have a place to mount the EGR & throttle linkage.

3G alternator from 94-95 Mustangs or other Ford. $20-$120. A must have to make the electrical system work like it should or if you have an electric fan. You’ll need a 4 gauge power wire and a 125-135 amp fuse to go with it about $15- $30.

Lincoln MK VIII electric fan -$40-$160. Free up some HP by not having to drive the stock fan. The 3G alternator upgrade is a must have prerequisite before you do the MK VIII fan. You won’t have enough electrical power if you don’t do the 3G upgrade.

Aluminum driveshaft: (courtesy of shawn13) It needs to be from a 92-93-94 Aerostar AWD and you will need the u-joint, part #353 from NAPA. It should bolt right up after the u-joint swap.

*1.) Metal flange adapter http://www.kustomz.com/cat3.html Buy the TR70 for $44.95. Or spend some time on eBay looking for one that may fit.

*2.) MAF & sensor interchange
The 94-95 Mustang 5.0 MAF & sensor is also found on:
1995-94 Mustang 3.8L F2VF-12B579-A2A,
1994-92 Crown Victoria 4.6L F2VF-12B579-A2A,
1995-94 Mustang, Mustang Cobra 5.0L F2VF-12B579-A2A,
1994-92 Town Car 4.6L F2VF-12B579-A2A,
1994-92 Grand Marquis 4.6L F2VF-12B579-A2A,
Evidently the –A1A, -A2A, AA, etc. on the end of the part number is a minor variant that did not change the operating specs. You should be able to ignore it and have everything work good.

I stole this from jrichker
 

1.8kmint

New Member
May 31, 2007
47
0
0
Middletown, CA
Sep 5, 2007
#3
  • Sep 5, 2007
  • #3
Cam would help to but that is a good list to start off with. Do the air filter and gears first and you should feel some immediate gains for real cheap. Running good synthetic oil, if your not already, helps and make sure you don't put too much in. 8 quart pan should be 5 quarts full as i recal reading somewhere.
 

chr1s11575stang

New Member
Aug 16, 2007
64
0
0
Orlando, Fl
Sep 5, 2007
#4
  • Sep 5, 2007
  • #4
ok thanks yall i will try n do some of this stuff this weekend and see how it works out. I already have the 373 gears. I just bought the car monday. So im still learning about it. Thanks for all the help
 
You must log in or register to reply here.

Similar threads

T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
219
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
507
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
669
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
666
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
334
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?