O.K. guys need some help here. If you look at my sig or profile you will see what I have car wise. I am tryin to hit 12's on motor. My best time to date is a 13.29. I am looking for a very cheap and easy way to knock a few more tenths off. My setup currently is as follows: 89LX 302,Edelbrock 5.0 performer upper and lower,24# injectors, Fcam, 75MM TB, 73 MAF, Mac CAI, Lakewood 70/30 struts,Aluminum driveshaft, BBK long tube headers, 21/2 flowmaster exhaust, 3.73's, 245/45/17 Drag Radials. Some guys told me to take my belt off and it may break into the 12's. But thats a hassle to have to do that all the time, not to mention the car getting hot. I thought about perhaps a short belt but I tried to retofit one on there and it will not turn the water pump pulley like it should unless there's another trick that I am unaware of on routing it. I dont have A/C but I have power steering. I took the belt and stuck it on the crank brought it up the backside of the water pump pulley and around the alternator. But it barely makes contact with the water pump. Any suggestions would be great and much appreciated.