Motor Mounts

C

chromehorse11

Founding Member

Dec 26, 2001

285

0

0

Brockville, Ontario, Canada

Jan 22, 2004

#1

• Jan 22, 2004

• #1

This might be old news, but.....

I was just watching "My Classic Car" and they were talking about a company called Steele Rubber Products, and among their products and services they include a service which rebuilds motor mounts . I guess they take your old ones, seperate them, sandblast them and revulcanize them. I thought that this might be handy for us, since the mounts are so hard to find. There is a catch though, apparently they don't sell Ford parts , but that doesn't necessarily mean they wouldn't rebuild our parts!?! I don't know how much, or where they are because i had to stop watching the show, i can only take so much of that Dennis Gage guy!

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Jan 24, 2004

#2

• Jan 24, 2004

• #2

Are there really that many of you looking for motor mounts? I was getting ready to mock up a jig and make some new ones for myself after a long break from the II. So who all would be interested in some new ones? If somebody else wants some, maybe it will motivate me to get off my ass and do it instead of dickering around with other projects. Anybody interested?

Kyle

 

J

JPR

New Member

Jan 4, 2004

11

0

0

Jan 25, 2004

#3

• Jan 25, 2004

• #3

Mounts

Sure, I would be interested if it can be done for a reasoable cost.

 

jeffnoel

Founding Member

Aug 31, 2002

1,638

5

37

Clovis, CA

Jan 25, 2004

#4

• Jan 25, 2004

• #4

Me too.

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Jan 25, 2004

#5

• Jan 25, 2004

• #5

allright guys, I'll see what I can do, I'll let you know in a week or two if I can find some time to hit the shop.

Kyle

 

78CobraII

Moderator

Jul 31, 1998

1,808

8

39

Birmingham, AL

Jan 26, 2004

#6

• Jan 26, 2004

• #6

Anybody checked with their Ford dealer lately? I bought a set of brand-new Ford motor mounts a few years ago from a dealer. He said that they were out of production, but there still seemed to be some in the supply pipeline. About $85 each (OUCH!).

Also didn't someone report a while back that one of the polyurethane bushing companies said they would make some if someone would send a worn out set?

78CobraII

 

7

77sleeper

GO BUCS!

Founding Member

Oct 11, 1999

7,266

0

0

Napalm, AZ

Jan 26, 2004

#7

• Jan 26, 2004

• #7

78CobraII said:

Also didn't someone report a while back that one of the polyurethane bushing companies said they would make some if someone would send a worn out set?

78CobraII

Click to expand...

that was me and the want a new set, and they will not be returned

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Jan 26, 2004

#8

• Jan 26, 2004

• #8

I plan on working something out this weekend. Shouldn't be hard whatsoever, only I'm only going off of my slightly worn current 302 mounts. Anybody have any dimensions they have made in the past they could send me? Might cut down on the trial and error a bit. Later

Kyle

 

CobraDuce

New Member

Dec 27, 2003

31

0

0

RedNeck, Pa

Jan 30, 2004

#9

• Jan 30, 2004

• #9

Kyle-
Id kill for a set of mounts just e-mail me with the price and ill have the check in the mail by nightfall.

Seriously e-mail Me

Rob Davidson

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Jan 30, 2004

#10

• Jan 30, 2004

• #10

Rob, It'll still be a while, I'm still working on a jig, been very busy with work lately, but never fear, it will be done. Hopefully I can scrap up some time this weekend to make it, I would still have to order some materials for the rubber inner part, unless you wanted solid mounts...which in my book aren't all that cool...I'd like to keep my teeth for a while. Anybody who might be considering it, drop me an e-mail at kylebennett@hotmail.com so I can figure up materials I need to order. I'll keep everybody updated.

Later,
Kyle

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Jan 31, 2004

#11

• Jan 31, 2004

• #11

UPDATE:

Finally found some time to start working on the jig, and it is coming along nicely. Just getting it all welded up right now, should be finished by the end of the weekend. I've gotten e-mails from three people, so if anybody else is interested, drop me a message at kylebennett@hotmail.com so I know how many I need to make.

Kyle

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Feb 4, 2004

#12

• Feb 4, 2004

• #12

well, I've gotten a lot of interest in the motor mounts. I have one of the jigs done, just need to finalize design of the mount itself and order up some materials. Just thought I'd update everybody, if anybody else is interested, be sure to drop me an e-mail.

Kyle

 

7

77sleeper

GO BUCS!

Founding Member

Oct 11, 1999

7,266

0

0

Napalm, AZ

Feb 4, 2004

#13

• Feb 4, 2004

• #13

are they gonna be solid?

 

Dano78

Founding Member

Nov 1, 1999

2,633

1

47

Vancouver, WA

Feb 4, 2004

#14

• Feb 4, 2004

• #14

I didn't catch the actual design either. Are they gonna be solid or are they gonna be rubber isolated? If they will be rubber isolated, I'd be interested.

I've got a few good canidates alreay for the 'solid' mount method. Nothing a few small pieces of plate and a mig welder wouldn't take care of.

 

7

77sleeper

GO BUCS!

Founding Member

Oct 11, 1999

7,266

0

0

Napalm, AZ

Feb 5, 2004

#15

• Feb 5, 2004

• #15

I was hoping for a big square hunk of POLY

 

bennettracing

Founding Member

Aug 26, 2002

280

0

16

Ava, MO

Feb 8, 2004

#16

• Feb 8, 2004

• #16

Hey everybody, sorry I've been away for a while, been really busy with work and school. The plan is for a solid mount design first, then I'm going to work on some factory-style mounts with the rubber isolators. I'm just waiting for my paycheck so I can order some raw materials, things are coming along well besides that!

Kyle