• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

motor rocks alot at idle

  • Thread starter Thread starter paintballtommy
  • Start date Start date Jun 13, 2004
P

paintballtommy

Member
Jan 31, 2004
244
0
16
concord, ca
Jun 13, 2004
#1
  • Jun 13, 2004
  • #1
the motor rocks a whole lot at idle but mellows out when you rev it up as well as that pesky rattlecan sound goes away as described in my other thread
http://forums.stangnet.com/showthread.php?t=472460 . could one of my potention problems like a cracked flexplate or messed up converter or loose bolts be causing the vibration?

thanks,
tommy
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Jun 13, 2004
#2
  • Jun 13, 2004
  • #2
Did you reinstall the distributor like I suggested to verify that it is correct along with verifying the firing order?
 
P

paintballtommy

Member
Jan 31, 2004
244
0
16
concord, ca
Jun 13, 2004
#3
  • Jun 13, 2004
  • #3
the for sure buty i havent doen the distributor thing yet because i have been working alot. it is a crate motor is it possible that they used a post 73 or whatever cam grind and crank in my pre 73 block? if so would that change the firing order?

thanks,
tommy
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Jun 13, 2004
#4
  • Jun 13, 2004
  • #4
What firing order are you using Tommy? 351s have always had the 13726548 firing order since day one....they were the oddball Ford because all other Ford engines use the 15426378 firing order.....go check that first then. They switched the 302 over to the 351 firing order in the later models but I am not sure exactly when that took place.
 
D

D.Hearne

New Member
Sep 29, 2000
11,730
6
0
south louisiana
Jun 13, 2004
#5
  • Jun 13, 2004
  • #5
paintballtommy said:
the motor rocks a whole lot at idle but mellows out when you rev it up as well as that pesky rattlecan sound goes away as described in my other thread
http://forums.stangnet.com/showthread.php?t=472460 . could one of my potention problems like a cracked flexplate or messed up converter or loose bolts be causing the vibration?

thanks,
tommy
Click to expand...
Just me, but sounds like you might have a healthy cam in there If so, then the rocking is cool.
 
You must log in or register to reply here.

Similar threads

L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
208
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Fuel Fuel Pump Rewire, New Fuel Lines, and Installation of New Fuel Pump Hanger with AN6 Connections
  • AeroCoupe
  • Mar 12, 2023
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
13K
Fox 5.0 Mustang Tech Apr 16, 2023
AeroCoupe
Giving the bird... new brains.
  • slipkid269
  • Jun 25, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 26, 2021
CarMichael Angelo
F
Water pump issue at idle
  • FirstFox89LX
  • Jan 8, 2020
  • Fox 5.0 Mustang Tech
Replies
17
Views
2K
Fox 5.0 Mustang Tech Jan 20, 2020
FirstFox89LX
F
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?