Mustang II 2.8 Head 1975

I have looked on car-part haven’t gone through the complete list, but the rebuilt was out of stock and one of the other places you had to pull yourself. The closest to me were TX and Ohio. We had contact with a rebuilder and we were told the exhaust ports outside of 75 and 76 were different. (I think this was American cylinder head) That may not be true but it worries me to spend that much money and not have it work out.
If anyone can confirm interchangeability I would feel better. Most of the info I found was from the ranger station.
I was probably optimistically looking for someone local that had a head or engine with heads to grab cores off of. Like 74stangs offer. I assume the 2.8 even complete doesn’t go for all that much.

I found one on eBay for a mercury that has matching casting numbers. Wasn’t listed as compatible, but I asked the seller and matching casting numbers are compatible. We shall see. It as on its way.

2Blue2 said:

Enzio is my Hero!

Click to expand...

starjunor said:

I found one on eBay for a mercury that has matching casting numbers. Wasn’t listed as compatible, but I asked the seller and matching casting numbers are compatible. We shall see. It as on its way.

Click to expand...

Got the Capri head installed and it bolted up perfect. Also upgraded to the offenhauser intake and a Holley 4 barrel needed a 1/2” filter spacer to run the stock air cleaner. Have some carb tweaks to do but it is running pretty good already.