Build Thread My 1986 T-top Build - Lasting Memories

Mustang5L5 · Aug 29, 2016

Boosted92LX said:
So.. Are we sure that new brake fluid makes the brakes fell better and it's not just the fact the system is being bled of any air that may have gotten in?

Not discounting that brake fluid gets funky.. But fluid doesn't compress. Be it water or hydraulic fluid. Just thinking out loud here..

Well, it's kinda the same situation really. Brake fluid soaks up the moisture, making it funky fluid, and the wet boiling point drops, and drops, and drops until the fluid can't absorb anymore, and you have free water in the system. Boil that, and your pedal just gets soft as a sponge. So not you have fluid with a low wet boiling point, free water, and some residual gas from some of the boiled fluid.

Plus all that fluid rusts out steel pistons and calipers and causes them to seize...especially the rear SN95 type calipers.

stykthyn · Aug 29, 2016

Just going to leave this here

Davedacarpainter · Aug 29, 2016

stykthyn said:
Just going to leave this here

That's actually pretty nice looking, I usually don't like that kind of crap.

stykthyn · Aug 29, 2016

This guy is putting some serious effort into his work. It's not the avg plasti stick on crap.

Mustang5L5 · Aug 29, 2016

Yeah. Not a fan of the Aero GT version but the LX and 85-86 version look great.

Sent from my big ass iPhone 6 using Tapatalk

stykthyn · Aug 29, 2016

Mustang5L5 said:
Yeah. Not a fan of the Aero GT version but the LX and 85-86 version look great.

Sent from my big ass iPhone 6 using Tapatalk

Really? I didn't like the Aero version, it seems to lend itself better to the 86 front better.

TOOLOW91 · Aug 29, 2016

They look mint in person guys . Kody smith had one on his at mustang week . Jason is a awesome dude he was with Scott for a few days down there .

Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

Davedacarpainter · Nov 30, 2016

Noobz347 said:
Hmmm.... Not a bad idea.

I wonder if he reads Stangnet?

Hey Noobz, here's a little irony from not too long ago, huh?

Noobz347 · Nov 30, 2016

Davedacarpainter said:
Hey Noobz, here's a little irony from not too long ago, huh?

Wait... wut... Huh?

Davedacarpainter · Dec 1, 2016

Davedacarpainter said:
Have you ever thought about being a campaign speech writer for Donald Trump there Noobz?
Got to admit, I laughed pretty hard over your reply.

Sorry noobz, this was the preceding comment

Davedacarpainter · Dec 1, 2016

Noobz347 said:
Largely as a matter of statistics.

Those who can > you.

With this being the original comment you made, it was based on correct orientation of photos. That was January 27th

CarMichael Angelo · Dec 1, 2016

I hope like hell that there is some other conversation going on that's not visible to the rest of us, because otherwise,........Dave's gone cra-cray.

What in the phck does the last 3 comments mean there Dave?...Even the guy you're talking to doesn't know.

Davedacarpainter · Dec 1, 2016

You have to read it backwards. I was looking for something in the red car thread and I saw this comment about noobz being trump's speech writer and it struck me as humorous.

Noobz347 · Dec 1, 2016

Hey, don't drag me into this. I just walked into the final scene of this movie and have to work backward.

Hangover the Movie: Stangnet version

CarMichael Angelo · Dec 1, 2016

I was privy to a sneak preview of that movie.

Actors: Davedacarpainter; ( plays himself) No named brother (also playing himself).

Plot: Another case where our un-assuming nice guy takes somebody at their word, only to find out that he's been dealing w/ an unsavory character,.and now he just tied his balls to the train track.

And there's a train coming

Will our hero be able to get out w/ his balls,...or will he start speaking two octaves higher???

Da- Da- DAAAAHHHHHH!!!!

Stay tuned Next week for The spine tingling ending.

stykthyn · Dec 1, 2016

madmike1157 said:
I was privy to a sneak preview of that movie.

Actors: Davedacarpainter; ( plays himself) No named brother (also playing himself).

Plot: Another case where our un-assuming nice guy takes somebody at their word, only to find out that he's been dealing w/ an unsavory character,.and now he just tied his balls to the train track.

And there's a train coming

Will our hero be able to get out w/ his balls,...or will he start speaking two octaves higher???

Da- Da- DAAAAHHHHHH!!!!

Stay tuned Next week for The spine tingling ending.

I just read this in the preview voice over guys voice

Noobz347 · Dec 1, 2016

stykthyn said:
I just read this in the preview voice over guys voice

Read it again only this time, think Sam Elliot:

Davedacarpainter · Jan 14, 2017

It's been a while since i talked about Doby, I miss working on the btch.

Though Robby is taking all of my focus right now, believe me, i haven't forgotten about her (considering she's stuck in my garage, i guess not!)

I will still be going to hash out the details on Doby once the blue car is driving. I will be making her into a really badass cruiser.

I've often thought i need to just go ahead and finish painting her front bumper and lift gate.

The bright side is, working on Robby has helped me to figure out what i'll do with Doby's problems like stretching out Doby's 1/4 trim to fit the mini tubbing. And lots and lots of other things as well. Like figuring out reducing the framing inside the foam of the rear seat!

Doby still will be an incredibly beautiful running mustang one day (or my wife will remove the other testicle i wasn't willing to sell for a sewing machine!). She doesn't pressure me every day about her, but every other day would be a safe statement.

Doby IS at the rebuild stage, btw. I just need to spend the money to put her together. Though i have learned a whole new respect for redoing the interior. That could take a month or two or three in itself.

Crazedstang · Jan 20, 2017

Sub'd

Davedacarpainter · Jan 20, 2017

Crazedstang said:
Sub'd

Almost.

Build Thread My 1986 T-top Build - Lasting Memories

That is…until I whipped out my Bissell

I want to measure mine. It doesn't look that tall.

Chicks can make things hard if they’re inspired...

I want to measure mine. It doesn't look that tall.

That is…until I whipped out my Bissell

I want to measure mine. It doesn't look that tall.

If you're the village idiot what's that make me?

Chicks can make things hard if they’re inspired...

Stangnet Facilities Maint Tech... Er... Janitor

Chicks can make things hard if they’re inspired...

Chicks can make things hard if they’re inspired...

my rearend will smell so minty fresh,

Chicks can make things hard if they’re inspired...

Stangnet Facilities Maint Tech... Er... Janitor

my rearend will smell so minty fresh,

I want to measure mine. It doesn't look that tall.

Stangnet Facilities Maint Tech... Er... Janitor

Chicks can make things hard if they’re inspired...

Chicks can make things hard if they’re inspired...

Similar threads

Privacy & Transparency

Privacy & Transparency