• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox My 1993 Gt

  • Thread starter Thread starter Gator740
  • Start date Start date Jul 18, 2016

Gator740

Member
Jul 16, 2016
17
11
13
Jul 18, 2016
#1
  • Jul 18, 2016
  • #1
Hello all, I just bought my first, but not last fox body. Loved these cars since I was a kiddo, and now I'm quite possibly obsessed...
Bought this old girl off the second owner, who put 180k on it and took decent care of it. He originally set the car up for autocross, put all the time and money into it but never enjoyed the fruits of his labor. Unfortunately Ohio salty roads have taken advantage of the car.
The car is built pretty good considering most people (at least in ohio) enjoy terrorizing the foxbodies.
306 with Jr windor head,trick flow cam, systemax intake, 70mm TB. Underdrive pulleys and a fat radiator.

T5, with 228,000 miles on it.
I have no idea what the suspenion is, I know it's too low for my liking, but it handles quite well.
Right now I'm just replacing the minor issues, leaky water pump, door actuators, door pins etc. Hopefully I can get it painted this winter, accumulating all the body panels I'll need right now. Like a squirrell waiting for winter
I'll try an attempt to upload some photos
 

Attachments

  • 2016-07-18_21.42.13.webp
    491.8 KB · Views: 252
  • 2016-07-18_21.41.14.webp
    733.3 KB · Views: 243
  • 20160718_185401.webp
    340.4 KB · Views: 219
  • 20160718_185638.webp
    185.5 KB · Views: 205
  • 20160718_185658.webp
    305.5 KB · Views: 208
Reactions: skyline247, Davedacarpainter and deathb4dismount

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Jul 19, 2016
#2
  • Jul 19, 2016
  • #2
So, what's the big end plan for your car? Street, strip, track?

Post some pictures of the suspension, that might be interesting to look at.

Interior doesn't look bad at all.

How's the engine bay?
 

Gator740

Member
Jul 16, 2016
17
11
13
Jul 20, 2016
#3
  • Jul 20, 2016
  • #3
End goal is to have a good looking weekend driver, occasionally take it to the local track. If I could make it completely stock minus a few mods, I'd be happy with it.
I'll post some suspension pics when I change the oil this week.
The interior is what sold it to me, other then getting it for the right price.
The engine bay could use some attention, but the whole car could too
 
Reactions: SF Lex and Davedacarpainter

SF Lex

Advanced Member
Mar 8, 2016
230
125
73
CoCo County, California
Jul 20, 2016
#4
  • Jul 20, 2016
  • #4
Gator740 said:
End goal is to have a good looking weekend driver, occasionally take it to the local track. If I could make it completely stock minus a few mods, I'd be happy with it.
I'll post some suspension pics when I change the oil this week.
The interior is what sold it to me, other then getting it for the right price.
The engine bay could use some attention, but the whole car could too
Click to expand...
Clean engine bay, very nice. I also have a somewhat clean engine bay, makes a world of difference.
 

Gator740

Member
Jul 16, 2016
17
11
13
Jul 20, 2016
#5
  • Jul 20, 2016
  • #5
I have some cleaning up to do. I'm going to diagnose the AC and if it's anything major, I'll just yank it. The smog pump is still in the car, but everything is disconnected from it. I bought some engine degreaser, but I'm super nervous to use it so it just sits in my shed. So one day hopefully I'll get the sack to use it,properly.
 
Reactions: SF Lex

SF Lex

Advanced Member
Mar 8, 2016
230
125
73
CoCo County, California
Jul 20, 2016
#6
  • Jul 20, 2016
  • #6
Gator740 said:
I have some cleaning up to do. I'm going to diagnose the AC and if it's anything major, I'll just yank it. The smog pump is still in the car, but everything is disconnected from it. I bought some engine degreaser, but I'm super nervous to use it so it just sits in my shed. So one day hopefully I'll get the sack to use it,properly.
Click to expand...
This is mines here. Not the cleanest, but it will pass the ok mark. I added that setup a few months ago.

92 GT Motor

  • Media owner SF Lex
  • Date added Mar 9, 2016
302 Ford Engine with a new BBK chrome Throttle body, new chrome mass air flow sensor, chrome EGR...
 

Attachments

  • 5092engine.webp
    65.1 KB · Views: 222
  • 12042731_1018383281554552_1976238811955262615_n.webp
    65.8 KB · Views: 170

Gator740

Member
Jul 16, 2016
17
11
13
Jul 20, 2016
#7
  • Jul 20, 2016
  • #7
That looks good man. One day when I have a few hours to spare I need to clean it up. Did you use any of the "engine degreasers". If so is there any tricks to protecting all the connectors? Or just tape and bag them all.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 20, 2016
#8
  • Jul 20, 2016
  • #8
Follow this link to fix your door lock actuator problems

You will need the Adobe Acrobat viewer which is also a free download – http://get.adobe.com/reader/

http://www.stangnet.com/mustang-forums/attachments/door-lock-actuator-fix-pdf.88290/

Stuck with door lock actuators that don't work and don't want to pay the $50+ for a new one? Tried the junkyard ones and found that they last six months and freeze up?

A new actuator for less than $7. Fix one side for $20, do both sides for only $28. I don't sell parts, I don’t make any money off of the upgrade, I just tell you how to do it cheaply and easily.

By the way, i am still using the same $4 actuators I bought in 2002 and this is the second Mustang I have installed them in! Beat that with your fancy replacements!
 
Reactions: Davedacarpainter

Gator740

Member
Jul 16, 2016
17
11
13
Jul 20, 2016
#9
  • Jul 20, 2016
  • #9
Thanks for the link above. I recently replaced my driver side actuator. I wish I wouldve read that before doing so. I had troubles finding where the rod actually went, so of course I had to remove my passenger side door panel to figure it out. Needless to say I'll start researching the forum before doing much of anything.
 

SF Lex

Advanced Member
Mar 8, 2016
230
125
73
CoCo County, California
Jul 20, 2016
#10
  • Jul 20, 2016
  • #10
Gator740 said:
That looks good man. One day when I have a few hours to spare I need to clean it up. Did you use any of the "engine degreasers". If so is there any tricks to protecting all the connectors? Or just tape and bag them all.
Click to expand...
I have used engine degreasers, and yes i cover it up with plastic and tape. Cover up the wires from where they connect, and cover up the distributor, and battery wires, ect. I let it sit for about 30 minutes,then hose down with a hose. I used to do it at them car washes with the power hoses. That way all the grease goes down the drain. And the power hoses do a great job. But yes, make sure you cover up everything really good. Either that or take it a shop, they know what they are doing. Then clean the rest up yourself with a rag, and some kinda cleaner. It does take long, but worth it.
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Jul 20, 2016
#11
  • Jul 20, 2016
  • #11
Depending on the amount of body work needed, that looks like a nice start. Clean interior, and the engine seems to have decent parts thrown at it. Should make a nice weekend driver that you are after. Congrats on the buy!
 

Gator740

Member
Jul 16, 2016
17
11
13
Jul 25, 2016
#12
  • Jul 25, 2016
  • #12
Just picked up a 93 convertible with a great body,Same exact color too. It's a 4cy auto. Gonna start tearing that one apart. I was looking for a thread of interchangeable parts, but couldn't find much. If anyone has a link I'd appreciate it. I'd imagine all the accessory stuff, alt,power steering pump,AC. Etc. would be the same. I'll add some more pics tomorrow.
 
Reactions: SF Lex and Davedacarpainter

Gator740

Member
Jul 16, 2016
17
11
13
Jul 27, 2016
#13
  • Jul 27, 2016
  • #13
So, I started cross referencing parts according to part numbers provided by Advanced Auto. All drive belt equipment works, besides the PS pump. All window components are the same including wiper motor motor and washer pump.

A/C components are the same including blower motor.
The starters have different part number, from my understanding though it will still work.

I'll be posting a few convertable part's and 2.3 parts in the classifieds once I test them and make sure they work properly. I've nevery sold anything online,it may get interesting. Im going to sell super cheap since I bought the car for 350 bones, plus pizza and beer for the help.
 

Attachments

  • 20160727_174709.webp
    352.8 KB · Views: 175
  • 20160727_174716.webp
    247.7 KB · Views: 176
  • 20160727_174723.webp
    324.4 KB · Views: 129
  • 20160727_174734.webp
    237.4 KB · Views: 101
  • 20160727_174744.webp
    250.8 KB · Views: 160
Last edited: Jul 28, 2016

Gator740

Member
Jul 16, 2016
17
11
13
Nov 11, 2016
#14
  • Nov 11, 2016
  • #14
Well,took the car to see what it'd cost to get it painted, along with all the body work. was a little out of my price range. I think my next step is to buy a nice roller, or 4cyl. car and transplant everything I have into it. just bought some land, and spending most my time trying to get ready to build a house. the pony car is having to take a back seat for now.
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
Progress Thread Restoration progress on my 92 GT
  • AnthonyA1234
  • Oct 19, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2025
Mac131
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?