My 20psi dyno session twin turbo 2V

y2k02 · Aug 17, 2008

Ken spent a lot time today tuning my car on his day off. He is truly dedicated to making sure his customers cars are tuned RIGHT! The pulls were made with 94 octane and using a AIS methanol injection kit. The timing max is only 16*.
View attachment 307364
This was the 20psi pull.
View attachment 307365
Last year on Ken's dyno the most rwhp was 572@20psi 18* timing on 100 octane. I will be going to a track rental this sunday and will be posting track times.

MyBloodRunsBlue · Aug 17, 2008

that is a beautiful dyno graph! i love your car

BurningRubber · Aug 17, 2008

Good Lord those are some nice numbers!!!

You think its a little lean after 4300 RPM?

fudleyd · Aug 17, 2008

That is a beautiful car man. She is putting down some SERIOUS power!

y2k02 · Aug 17, 2008

No just look on the left side of the graph.

darkside03gt · Aug 17, 2008

nice numbers. are you using the stock plasic pi manifold?

blackink00 · Aug 17, 2008

that whole things is kinda scary lean. usually on FI you wanna run around 11.5 A/F ratio

y2k02 · Aug 17, 2008

darkside03gt said:
nice numbers. are you using the stock plasic pi manifold?

HPS Hardball'r intake and it is heavily ported. I'm also running a C4 transmission.

hotmustang331 · Aug 17, 2008

Great #s! At first I was thinking "man something is wrong...Twin 60s should throw down alot more than that @ 20PSI"....then I watched teh vid and heard the AUTO .

Not dyno queens, but they really lay it down on the track! Auto is the way to go at your level...I just wish they showed up how much power they are actually putting down on the dyno. When you get out racing they always trap WAY higher than a M5/M6 car thats putting down simular #s....they also ET WAY lower too

Anyways, let us know how it runs!

Cobra123089 · Aug 17, 2008

what all do you have done? and what turbo kit did you decide to go with?

y2k02 · Aug 17, 2008

I'm sure if it was a m5/m6 it would have been closer to 800rw.

CobraRed_96_GT · Aug 18, 2008

y2k02 said:
I'm sure if it was a m5/m6 it would have been closer to 800rw.

657/.80 = 821.25 flywheel
821.25x.85 = 698rwhp at 15% drivetrain loss

y2k02 · Aug 18, 2008

There is a lot more "loss" with a non-locking TQ converter. My car maxed out the fuel system last year on Ken's dyno making 574rwhp. That fuel setup was good to around 750rw.

darkside03gt · Aug 18, 2008

not trying to change the subject or hijack your thread but how did your tank baffle work out? how did you finish it off?

bhuff30 · Aug 18, 2008

That's pretty awsome. Must be a bit uncontrollable putting that kind of power down on the street.

I think it's a bit strange that your peak torque doesn't occur soon as the turbos hit full boost. There must be some serious timing retard at spool up.

I'm always surprised how little timing is run when people boost these engines. I think you'd be better off and have a lot more fun with more timing and less boost, especially since you are pushing 20psi. On the 2.3, it's common to run around 24-26* of timing at full boost. I can't imagine the burn is that much faster on a 4.6. Any idea what the EGTs look like with 20psi and 16*? Well, maybe it's all for putting power down on the track instead of making tire smoke.

y2k02 · Aug 18, 2008

darkside03gt said:
not trying to change the subject or hijack your thread but how did your tank baffle work out? how did you finish it off?

I don't have it in my tank yet. It will be once the race season is over.

I don't know of too many people running more than 20* timing with the mod engines.

It is a HP Twin 60mm kit. I've had it on the car since early 05. Everything else is built to handle the extra power.

My 20psi dyno session twin turbo 2V

y2k02

Member

MyBloodRunsBlue

New Member

BurningRubber

fudleyd

New Member

y2k02

Member

darkside03gt

Member

blackink00

I missed a shift & stole Curt's money.

y2k02

Member

hotmustang331

Active Member

Cobra123089

Member

y2k02

Member

CobraRed_96_GT

Active Member

y2k02

Member

darkside03gt

Member

bhuff30

y2k02

Member

Similar threads

My 20psi dyno session twin turbo 2V

Member

New Member

New Member

Member

Member

I missed a shift & stole Curt's money.

Member

Active Member

Member

Member

Active Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency