• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

My bad experience with PATRIOT heads

  • Thread starter Thread starter y2k02
  • Start date Start date Jul 10, 2006

y2k02

Member
Apr 19, 2004
83
0
17
Jul 10, 2006
#1
  • Jul 10, 2006
  • #1
They're being fixed by a local shop . Patriot told my they would fix them for free, replace or refund my money. It is costing me about $600 to have them fixed. If I got the heads refunded. It would still cost me the same amount of money to get some good heads. If I send them to be fixed by patriot. They could be f__ked up again. I can't chance that again.The problems: One guide's hole was big enough to have had the next size guide placed in it. It was very loose. I have'nt found out about the rest of them yet. The valve job was'nt good at all. The guides for the exhaust valve didn't have enough clearance. The valves were stuck in the guides. I was making good power the way they were. Once I get it back together it should make more power. I will say the heads are cheaper, but in the long run they are more expensive. Once you add all the labor to pull the engine and have them pulled off , fixed, installed and reinstall the engine. Maybe you guys get the point. I do wish I would have bought different heads in the beginning. I guess because this other shop is redoing my heads that will make them not be Patriot any more. What a headache these heads have been.
__________________
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 10, 2006
#2
  • Jul 10, 2006
  • #2
Deja Vu
http://forums.stangnet.com/showthread.php?t=647492
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jul 11, 2006
#3
  • Jul 11, 2006
  • #3
Of all the problems I have heard in the past I would
never put Patriot cylinder heads on my car.
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Jul 11, 2006
#4
  • Jul 11, 2006
  • #4
DropTopPony said:
Deja Vu
http://forums.stangnet.com/showthread.php?t=647492
Click to expand...

I knew I read this already. It's also on quite a few other Mustang boards. This guy is out for blood
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Jul 11, 2006
#5
  • Jul 11, 2006
  • #5
so who do we still have reputable in terms of aftermarket heads?
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Jul 11, 2006
#6
  • Jul 11, 2006
  • #6
VT, MMR, MPH?
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jul 11, 2006
#7
  • Jul 11, 2006
  • #7
VT and MPH
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Jul 11, 2006
#8
  • Jul 11, 2006
  • #8
those companies are great...but i gotta say fox lake did awsome on my heads and custom blower cam. i will be ordering from them again.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 11, 2006
#9
  • Jul 11, 2006
  • #9
Stang|ess said:
I knew I read this already. It's also on quite a few other Mustang boards. This guy is out for blood
Click to expand...
yeah i've seen it around....i'd still like to know how long ago he bought them...they were supposedly over this issue.
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jul 11, 2006
#10
  • Jul 11, 2006
  • #10
Yeah he has posted this on every site he can find.. from what i understand he bought them mid last year. I bought mine in October of last year and they have performed beautifully and the customer service is as good if not better than anywhere else. they spent alot of time on the phone with me helping me pick piston and other components that they really didnt have to do... Gunner @ patriot FTW
 
4

40oz

Member
Jan 9, 2006
499
3
18
Minneapolis
Jul 11, 2006
#11
  • Jul 11, 2006
  • #11
IDK, but to me, the key point with a company is if they are willing to stand behind their products. If they offered to make it right, I don't know that they deserve to be black-balled. Any company can have a problem, but how they address the issue and take care of their customers is the telling point.
 

XtorT'r

New Member
Jun 11, 2003
381
0
0
Minnesota, YAAA
Jul 11, 2006
#12
  • Jul 11, 2006
  • #12
40oz said:
IDK, but to me, the key point with a company is if they are willing to stand behind thier products. If they offered to make it right, I don't know that they deserve to be black-balled. Any company can have a problem, but how they address the issue and take car of their customers is the telling point.
Click to expand...
 
0

01Steeda

New Member
May 29, 2005
732
0
0
Baton Rouge, LA
Jul 11, 2006
#13
  • Jul 11, 2006
  • #13
40oz said:
IDK, but to me, the key point with a company is if they are willing to stand behind their products. If they offered to make it right, I don't know that they deserve to be black-balled. Any company can have a problem, but how they address the issue and take car of their customers is the telling point.
Click to expand...



:Word:

and he did offer to refund.. which os more than any company would do 9 months out of warranty. you are really dumb not to take the refund.
 

stangGT97

New Member
Dec 22, 2004
1,299
1
0
Boston area, MA
Jul 11, 2006
#14
  • Jul 11, 2006
  • #14
40oz said:
IDK, but to me, the key point with a company is if they are willing to stand behind their products. If they offered to make it right, I don't know that they deserve to be black-balled. Any company can have a problem, but how they address the issue and take care of their customers is the telling point.
Click to expand...

well put! I work in product service so I deal w/ consumer and commercial complaints with our products. Just because some of them have problems doesn't mean our products suck, and we always reimburse the customer for the defective products. It's just the nature of manufacturing, things don't always perform to spec, and that's why the company has to be up to the task of making things right with the paying customer.
 

y2k02

Member
Apr 19, 2004
83
0
17
Jul 11, 2006
#15
  • Jul 11, 2006
  • #15
01Steeda said:
:Word:

and he did offer to refund.. which os more than any company would do 9 months out of warranty. you are really dumb not to take the refund.
Click to expand...
He only offered to refund after I said I was going to post on all the mustang sites. Yes the heads were new june of last year. From day one my engine used alot of oil. I only found out this febuary with I had their weak springs replaced with endura-tech that I had cylinders leaking 40% after engine was assembled. I was told then it might make it the rest of the year. But this winter I need to pull the engine and have the heads fixed. Well, after I had my tq converter restalled I went to the track and one pass the engine started to tick. That is when I pulled the engine out again and sent the heads to be checked. If the heads had been right in the first place I wouldn't have this problem. It is not my fault their machining was not right. You say I'm dumb for not taking the refund. If I would have done that. They could have taken months to send me my money. Then when and if they sent my money I would have had to add the same $600 it's costing to fix. To buy a good set of heads. So, how is that dumb. Now the smart thing would have been for them to have covered some of the cost of the repairs. They didn't offer that. I only posted my experience as I have with any of the problems I've had with the car. If he had not posted back it would have fizzled out anyway. So, I like everytime he posts.I have alot of time and money in my car. It sucks that the problems I'm having has to do with the heads that are supposed to be of good quality.
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
Jul 11, 2006
#16
  • Jul 11, 2006
  • #16
y2k02 said:
He only offered to refund after I said I was going to post on all the mustang sites. Yes the heads were new june of last year. From day one my engine used alot of oil. I only found out this febuary with I had their weak springs replaced with endura-tech that I had cylinders leaking 40% after engine was assembled. I was told then it might make it the rest of the year. But this winter I need to pull the engine and have the heads fixed. Well, after I had my tq converter restalled I went to the track and one pass the engine started to tick. That is when I pulled the engine out again and sent the heads to be checked. If the heads had been right in the first place I wouldn't have this problem. It is not my fault their machining was not right. You say I'm dumb for not taking the refund. If I would have done that. They could have taken months to send me my money. Then when and if they sent my money I would have had to add the same $600 it's costing to fix. To buy a good set of heads. So, how is that dumb. Now the smart thing would have been for them to have covered some of the cost of the repairs. They didn't offer that. I only posted my experience as I have with any of the problems I've had with the car. If he had not posted back it would have fizzled out anyway. So, I like everytime he posts.I have alot of time and money in my car. It sucks that the problems I'm having has to do with the heads that are supposed to be of good quality.
Click to expand...
I appreciate you putting this on all the mustang sites I seen it also.
I would just like to say thanks for informing the mustang cummunity
that patriot heads are garbage.
 
You must log in or register to reply here.

Similar threads

S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
400
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
221
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
Fox Good shop in Washington state or Oregon
  • keel
  • May 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
118
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
keel
G
2016 GT, Cold Air/Tune Trouble (overheating) . Advice/Help Please!
  • GLStang
  • Sep 6, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
338
2015 - 2023 (S550) Mustang -General/Talk Sep 6, 2025
Noobz347
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
261
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?