My cobra is awake!!!
- Thread starter cobrasvtcoupe25
- Start date
ShadowFist
New Member
I don't know?
Maybe somebody can tell us????
I'm thinking 12 rwhp or something around that area. After driving the tune for a day I realized I need to do some suspension upgrades soon. Haha
fobra559
At least it's more erect and not floppy anymore.
Someday I will. That's what my project goal is, but I plan on getting the cobra ready for it first. I'm talking about Suspension work because after I put the tune on I was spinning the tires more.
The diablo will be get to reset the speedo for 4.10's though
fobra559
At least it's more erect and not floppy anymore.
You just need to learn how to drive your cobra with the tune
The 4.10's is not going to help if you spin the tires
The 4.10's is not going to help if you spin the tiresYou just need to learn how to drive your cobra with the tune
I really need a pair of sub frame connectors bad
amnit:
fobra559
At least it's more erect and not floppy anymore.
blackfang
Founding Member
Gears are a must for a first mod along with a shifter. You just have to learn to drive better. Even with suspension you can still spin the tires with those gears.
I agree with you, but that stock IRS of mine also hops bad under hard lanuches. I have a feeling that if I put 4.10's in and go to the track I'll bust my 28 spline axles through wheel hope off the line
Anyone see the Horse Power TV show on Saturday? I know it was an 03 Cobra, but DAMN! With no,0,nada, not a single other mod a Hypertech with no provisions for custom tuning gave the car 43 rwhp!!! After that they swaped to a 3" pullie and only gained another 6hp and then anothe 12hp when they put on the 2.98 or 2.93 I forgot which. Sorry a little off topoic but that is an unbelievable gain for JUST a tune with all factory hardware
I forgot which. Sorry a little off topoic but that is an unbelievable gain for JUST a tune with all factory hardware
fobra559
At least it's more erect and not floppy anymore.
Anyone see the Horse Power TV show on Saturday? I know it was an 03 Cobra, but DAMN! With no,0,nada, not a single other mod a Hypertech with no provisions for custom tuning gave the car 43 rwhp!!! After that they swaped to a 3" pullie and only gained another 6hp and then anothe 12hp when they put on the 2.98 or 2.93
Yeah I know and we install a CAI, it's good for 5-8hp on our n/a cars while the terminators gain around 25+hp. I swear, I'm going to get my hands on one later on
They respond so well to simple mods. I'm jealous.Yeah I know and we install a CAI, it's good for 5-8hp on our n/a cars while the terminators gain around 25+hp. I swear, I'm going to get my hands on one later on
Serious.... I just watch one run a 10 second quarter mile with a whipple...
http://videos.streetfire.net/video/2934F511-4D58-46F4-9C73-74E226470A0D.htm
fobra559
At least it's more erect and not floppy anymore.
Serious.... I just watch one run a 10 second quarter mile with a whipple...
http://videos.streetfire.net/video/2934F511-4D58-46F4-9C73-74E226470A0D.htm
The guy who installed my gears just got a 03 cobra and installing his whipple this weekend. He's going to be in the 10's for sure. He's looking to swap his IRS for a solid axle because the wheel hop sucks from the IRS.
blackfang
Founding Member
I agree with you, but that stock IRS of mine also hops bad under hard lanuches. I have a feeling that if I put 4.10's in and go to the track I'll bust my 28 spline axles through wheel hope off the line
I had 4.10's in my 99 cobra. You just have to learn how to control it. An IRS brace and better bushings help.
Dude, PM me if he wants to! I have a solid 8.8 with fresh Trac-Loc and 3.73s and new seals. I would drive mine to him and pick his up.
Sorry mods: if this violates please just erase instead of locking Thanks
fobra559
At least it's more erect and not floppy anymore.
Dude, PM me if he wants to! I have a solid 8.8 with fresh Trac-Loc and 3.73s and new seals. I would drive mine to him and pick his up.
Sorry mods: if this violates please just erase instead of locking Thanks
I just spoke with him yesterday late night and he found a guy up north to do the swap with. Sorry dude
Thanks for asking Fobra559 
